Amit Kumar Halder

• Managed project budgets, cost control, and financial reporting to ensure alignment with organizational goals.
• Planned, scheduled, and monitored project timelines, ensuring adherence to milestones and deadlines.
• Led project staffing, recruitment, and team development for effective execution.
• Delegated tasks and responsibilities to project team members, ensuring accountability and productivity.
• Oversaw all project deliverables, ensuring compliance with technical standards and client requirements.
• Maintained effective communication with senior management, clients, and key stakeholders.
• Directed resource allocation and utilization to optimize performance and reduce costs.
• Defined project scope, objectives, and goals in coordination with design and engineering teams.
• Collected, documented, and analyzed technical and mechanical requirements for project execution.
• Supported teams in equipment management, installation, and problem-solving.
• Reviewed and tested technical solutions to ensure operational effectiveness and reliability.
• Supervised individual contributors and ensured alignment with project priorities.
• Established project milestones and key deliverables in accordance with EPC and QA/QC standards.
• Ensured design and engineering changes remained within schedule and budget limits.
• Continuously monitored project progress, identifying risks and implementing corrective actions.

Project Expertise:

• Rebar Mill-TSL ludhiana
• RMHS/ORE & FLUX SYSTEM/DES SYSTEM-TSK
• Combi Mill project-TSL JAMSHEDPUR.
• RMHS Project-AMNS HAZIRA
• SMS MAINTENANCE PROJECT-NINL-JAJPUR.

• Coordinated with Design & Supply teams for 414 KTA smelter capacity expansion (Carbon, Utilities, Cast House, Storage).
• Managed overall project coordination between BALCO and GAMI (China).
• Handled supply management, contractor/vendor negotiations, and cost control.
• Oversaw design, supply & EPC contracts; resolved design and layout issues.
• Directed budgeting, procurement, engineering, accounting, and construction activities.
• Supervised project staff and ensured schedule, quality, and cost targets.
• Conducted project meetings, reporting, and change management.
• Maintained communication with owners, engineers, suppliers & subcontractors.
• Implemented project management systems for monitoring & control.
• Developed and mentored multidisciplinary project teams.
• Collaborated with manufacturing partners to ensure quality & timelines.
• Presented project status to executive management.
• Managed equipment planning, utilization, and performance optimization.
• Developed contingency plans and ensured process improvements.
• Provided constructability input and technical solutions for complex issues.

CLIENT: BALCO

CONTRACTORS-L&T,KEC,OSWAL ETC

• Handled client and contractor management, team leadership, and project target monitoring.
• Prepared erection schemes for pressure parts, boiler drum, Air Cooled Condenser, turbine, CHP, piping, equipment, and pumps.
• Managed resource planning, manpower allocation, and execution of piping works as per QA/QC standards.
• Certified contractor bills and prepared internal billing and measurement sheets.
• Monitored material supply chain to ensure smooth and timely work execution.
• Reported directly to the Deputy General Manager, working independently with minimal supervision.
• Provided technical leadership, mentoring, and supervision to mechanical team members.
• Ensured compliance with contractual and subcontract obligations, roles, and responsibilities.
• Managed site interfaces and productivity between contractors and subcontractors.
• Led site coordination meetings and represented the mechanical discipline team.
• Developed and monitored short- and medium-term targets, ensuring milestone achievement.
• Controlled and reported financial and budget performance, including cost reconciliation.
• Coordinated procurement and construction activities to align with project schedules.
• Managed engineering resources, subcontractors, labor, plant, and materials efficiently to meet production goals.
• Maintained labor relations and morale, addressing grievances and disciplinary issues in coordination with site management.

CLIENT-NSPCL

• Handled client and contractor management, ensuring smooth coordination and project target achievement.
• Prepared and executed erection schemes for boiler and mechanical systems with effective resource and manpower planning.
• Managed project budgeting, vendor selection, and commercial negotiations to optimize costs.
• Oversaw billing, invoicing, and cash flow monitoring to maintain project financial health.
• Controlled material supply chain to ensure timely and quality work execution.
• Prepared and administered contracts, work orders, and procurement documents as per company policies.
• Developed project budgets and cost estimates using mechanical construction expertise and market analysis.
• Ensured compliance with internal contracting standards, QA/QC norms, and safety procedures.
• Conducted meetings with subcontractors, clients, and owners to review scope, budgets, and project progress.
• Supported project development by contributing to pricing and bid preparation.
• Supervised and coordinated subcontractor activities, resource allocation, and work schedules to maintain productivity.
• Inspected ongoing and completed work to verify alignment with project drawings, specifications, and industry standards.
• Monitored job costs, productivity, safety, and quality, ensuring adherence to margins and profitability.
• Regularly updated and maintained project schedules and progress reports.
• Facilitated clear communication among subcontractors, clients, and stakeholders, resolving technical or execution issues promptly.
• Strengthened client relationships through consistent project performance and proactive engagement.
• Maintained flexibility for extended hours or weekend work as required by project demands.

• Managed end-to-end project execution from area allocation to erection, commissioning, and validation, including 1-year warranty and maintenance responsibilities.
• Ensured branded service execution in alignment with Annual Business Plan (ABP) and organizational standards.
• Oversaw Erection & Commissioning (E&C) of various boilers and thermic fluid heaters (CPFD, FBC, etc.) as per RSMH guidelines.
• Handled regional KPI compliance, monthly MIS reporting, and dealer/vendor/channel partner performance gradation.
• Managed contractors, suppliers, and service partners to ensure timely and quality service delivery.
• Conducted GAP analysis, capability building, and technical training for channel partners and client engineers.
• Achieved targeted customer satisfaction and complaint resolution (TCA index) through proactive service management.
• Provided technical support to field teams and assisted in troubleshooting and fieldwork when required.
• Offered after-hours support to ensure uninterrupted customer service.
• Assisted technicians in locating materials, tools, and equipment for on-time service completion.
• Managed shop/store inventory, ensuring availability of critical spares and consumables.
• Scheduled, prioritized, and executed jobs within budget and quality standards to maximize customer satisfaction.
• Maintained consistent customer follow-ups and ensured resolution of issues to enhance service experience.
• Reviewed and approved service tickets, invoices, and billing documentation.
• Supervised equipment cleaning, maintenance, and service readiness.
• Demonstrated in-depth technical expertise in commercial boilers, including installation, testing, and maintenance.
• Prepared cost estimates and performed both field and formal project estimation for service operations.

• Managed erection, alignment, assembly, and maintenance of high-pressure moulding machines and complete mould handling systems.
• Handled installation, commissioning, and service of sand plant equipment including conveyors, elevators, sand mixers, screens, and shot blasting systems.
• Oversaw sales and service operations of foundry equipment and spares in the eastern region, achieving business growth targets.
• Planned, directed, and coordinated manpower allocation to meet production and maintenance schedules.
• Developed and maintained work instructions, process documentation, and maintenance reports.
• Ensured strict adherence to process control parameters and QA/QC standards during operations.
• Participated in quality and GMP training, driving continuous improvement in service and plant performance.
• Implemented proper startup and shutdown procedures to minimize downtime and equipment wear.
• Maintained production efficiency through proactive machine operation and accurate production recording.
• Ensured safe operational conditions and compliance with safety protocols and maintenance standards.
• Maintained housekeeping and Good Manufacturing Practices (GMP) across assigned work areas.
• Demonstrated strong technical expertise in mechanical and pneumatic systems, troubleshooting complex issues.
• Assisted in developing Standard Operating Procedures (SOPs) and maintenance policies.
• Updated and maintained operator and maintenance manuals for the service department.
• Conducted cost analysis and reporting for maintenance, repair, and service operations.
• Managed procurement of parts, tools, and equipment, ensuring timely availability of resources.
• Recommended and implemented quality improvement initiatives to enhance equipment performance and product quality.

• Supervised erection, alignment, and welding of major structural steel components in SMS, Ferro Alloy Shop, Pump House, and Pipe Bridge.
• Prepared and executed daily/monthly micro plans, ensuring progress tracking and timely completion.
• Managed manpower, tools, and equipment (T&P) for smooth on-site operations.
• Coordinated with subcontractors and fabricators to meet project schedules.
• Conducted fit-up, alignment, and weld inspections as per drawings, WPS, and QA/QC standards.
• Supervised engineering teams across multiple work fronts to achieve daily targets.
• Ensured proper use of tools, tackles, machinery, and safety measures during erection.
• Liaised with consultants (Mecon & Primetals - Siemens) for inspection, approval, and documentation.
• Maintained inspection records and quality documentation for client verification.
• Ensured strict adherence to quality, safety, and schedule compliance throughout BOF project execution.

• Supervised fabrication, erection, and alignment of major structures and equipment — crane girders, tanks, silos, conveyors, pipelines, hoppers, platforms, ducting, and buildings across process and power projects.
• Oversaw installation and commissioning of mechanical systems including bucket elevators, pneumatic conveyors, crushers, feeders, compressors, dust collectors, and bag filters.
• Managed maintenance and overhauling of boiler pressure and non-pressure parts (Economizer, Superheater, APH, ESP, Ash Handling, etc.) for thermal power plants.
• Led erection of 300 MW PF boiler (Western Power, China make), including boiler drum, pressure parts, BFP, ducts, fans, and TG building.
• Planned and executed daily, weekly, and monthly schedules, ensuring target achievement with efficient manpower and T&P utilization.
• Conducted fit-up, alignment, and welding inspections per drawings, WPS, and QA/QC standards.
• Prepared bills, material reconciliations, and progress reports (item-wise and milestone-based) for client approval.
• Coordinated with clients, subcontractors, vendors, and consultants to ensure on-time and cost-effective project execution.
• Attended review and technical meetings, prepared MOMs, and addressed project issues with corrective actions.
• Managed supply chain coordination, ensuring uninterrupted material flow and site readiness.
• Maintained QA/QC documentation, safety compliance, and quality standards throughout project execution.

Clients:

1.Graphite India Ltd (Durgapur)

2.Gujarat State Electricity Corporation Ltd (7×210 MW)

3.Cresent Power Ltd (2×20 MW)

4.Budge Budge Power Station (3×250 MW)

5.Maruti Clean Coal & Power Ltd (1×300 MW).

• Supervised periodic and shutdown maintenance of plant machinery and equipment.
• Oversaw fabrication, repair, and refurbishment of machines (pneumatic pistons, agricultural machinery, etc.) at vendor facilities.
• Coordinated and guided technicians and maintenance teams to ensure timely completion of tasks.
• Prepared progress reports, repair logs, and maintenance documentation for management review.
• Ensured adherence to production schedules while performing maintenance and repairs.
• Maintained equipment reliability, safety standards, and operational efficiency during production and maintenance activities.

• Assisted in photogrammetry projects using AutoCAD and specialized photogrammetry software for mechanical design applications.
• Supported 3D modeling, mapping, and spatial data analysis for engineering components.
• Collaborated with the team to integrate software tools with mechanical design workflows.
• Prepared and maintained technical documentation and model verification reports.