Amit Mitra

Works involved in

• 230/400 KV Substations in Bangladesh based on BNBC, Eurocode Design of 230 KV/400KV gantry tower and equipment structures
• 132/33 KV Substations in Fiji based on AS/NZS codes. Design of 132KV Gantry Tower and Equipment Structures, Control room building, Water tank
• 220/66 KV BHACHUNDA SUBSTATION FOR GETCO

Design review of roads , culverts , paving , storm water drains , transformer foundations , resolution of all site related issues in BOP

• 220/66KV VAGCHIPPA SUBSTATION

Design of storm water drains, cable trench network, roads and overall layout, resolution of site related issues in BOP.

• 132 KV RECEIVING SUB STATIONS AT NAGPUR METRO PROJECT

Design of 2 nos GIS building, transformer foundation , equipment foundations and structures , store room, storm water drains, cable trench network, roads and overall layout, resolution of site related issues in BOP.

• 132 KV RECEIVING SUB STATIONS AT PUNE METRO PROJECT

Design of 3 nos GIS building, transformer foundation , equipment foundations and structures , store room, storm water drains, cable trench network, roads and overall layout, resolution of site related issues in BOP.

• 220/11 KV GIS SUBSTATION AT NXTRA DATA CENTER HINJEWADI PUNE

Design of GIS building, transformer foundation , equipment foundations and structures , store room, storm water drains, cable trench network, roads and overall layout, resolution of site related issues in BOP.

• STTGDC 220/11kV GIS SUBSTATION AT DIGHI PUNE

Design of GIS building, transformer foundation , equipment foundations and structures , store room, storm water drains, cable trench network, roads and overall layout, resolution of site related issues in BOP.

• 220 KV GIS SUBSTATION AT PANVEL FOR MSETCL

Design of GIS building, transformer foundation , equipment foundations and structures , store room, storm water drains, cable trench network, roads and overall layout, resolution of site related issues in BOP.

Works involved in

• PARADIP REFINERY PROJECT OF IOCL (ATMOSPHERIC VACCUM UNIT)

Analysis and design of OFF GAS COMPRESSOR and other exchanger/vessel foundation

• 2x525 MW NAVABHARAT THERMAL POWER PLANT AT MERAMANDALI ORISSA

Design of foundation for TurboGenerator building , ID Fan , FD Fan and PA fan

• 2x135 MW POWER PLANT OF ESSAR AT HAZIRA

Analysis and Design of 220KV Switchyard Gantry structure

• PELLET PLANT FOR ESSAR STEEL MINNESOTA LLC

Analysis and Design of Additive Grinding Building

• ASH HANDLING PLANT OF 2X600 MW TORI THERMAL POWER PLANT AT JHARKHAND

Analysis and design of Bottom Ash Silo structure

• ASH HANDLING PLANT OF 2X600MW MAHAN THERMAL POWER PLANT

Review of Ash handling plant structures designed by Mcnally Bharat

• JURONG AROMATICS

Design of Compressor House , Piperacks etc.

Works involved in

• 2.5 MTPA NEW STREAM EXPANSION INTAKE WORKS AND PLANT MW DW SYSTEM AT IISCO BURNPUR

Analysis and design of Rapid Gravity Sand Filter House and Cascade Areator .

Guiding Juniors for carrying out their assignments of designing cable galleries, chemical house etc.

Works involved in

• ROURKELA STEEL PLANT 4.2MTPA CRUDE STEEL EXPANSION-OBBP AND BASE BLENDING FACILITIES

Analysis and design of Flux Screening Station and junction houses

Works involved in

• Analysis and design of equipment foundations, piperacks and equipment supporting platforms for projects of Kaneka corporation in Pasadena and Ventech in Karachi Pakistan , VCD unit in IOCL Haldia , Utkal Alumina Evaporation Plant Damanjodi

Major works involved in:

• Northern Oman Gas Facilites Project for Occidental Oman LLC.

This project is a gas gathering and export station with compressors and other ancilliary equipments. Scope was designing and detailing of equipment /machine foundations. Involved in preparation of design basis and civil works specification for the project . Performed analysis and design of sales gas compressors , propane compressors and various vessel foundations. Also as a lead engineer of the project coordinated design activities with other civil engineers and other disciplines.

• Harweel Cluster EDF project

Involved in analysis and design of foundations for 2 motor driven reciprocating compressors

• Saih Niyada Gas treatment plant

I was seconded to Petroleum Development Oman for 3 months and was involved in reviewing the design of control room building ,piperack and other foundation and structures by SNC Lavalin, Calgary Canada. The basis of design review were DEPs of Shell , ERD of PDO and applicable BS codes.

• Local Design Service Contract of PDO.

Reviewing contract documents ,preparing manhour estimates , deliverable lists , Interdisciplinary coordination, vendor documents review

Analysis , design and detailing of various RCC and steel structures like control buildings piperacks platforms vessel foundations and skid foundations .Works related to flowlines and bulklines.

• Adar Agordeed Field processing facilities and Melut Basin pipeline in Sudan.

Preparing specification for topographical and route alignment survey by GPS for pipeline. Involved in analysis and design of anchor blocks , tank foundations and piperacks for the project.

• Rustaq 132kv Transmission system

Analysis and design of 132/33Kv substation/control room building

• Al Wasit 220KV Transmission system

Analysis and design of 220/132/33KV GIS/Substation building and 315 MVA transformer foundations. Review of transmission line tower foundation design.

• Saud Bahwan corporate centre

Design review and site supervision of 33/11kv substation building

• Expansion of Bowsher reservoir

Analysis , design and detailing of underground reservoir for the project.

Major works involved in:

• WAFA – NCL treating units in Mellitah Libya Client –AGIP BV/ SOFREGAZ

Plant capacities are Sales Gas – 4.44 BSCM , Stabilized oil –60600SBPD , Propane –13,200 SBPD and Butane –7700 SBPD

I was involved in design of piperacks and pipe sleepers , underground tanks and vessel foundations.

• Abu Dhabi molten sulpher treatment plant Client – Borouge petrochemicals

Design of fixed roof molten sulpher tank based on API650

• HDPP and HDPE project in Poland

Involved in analysis design and detailing of Polymerisation building

· HDPE plant (32000 ton/yr) Client – Bassel Polyfine GMBH in Wesseling Germany.

Involved in piperack design for the project

The basic job profile consists of conceptualisation , analysis , design and 3D modelling of various power plant structures. Output of the above process involves extraction of 2D drawings and material take off from the 3D model.

Projects:

2x700MW Reference power plant for S.E. Asia

2x900MW Reference power plant in China and USA

Choteau Combined Cycle Power Plant in USA

2x570 MW Combined Cycle Power Plant in Singapore Client Pulao Seraya Power Company

1500 MW Combined Cycle Power Plant in Al ShuweiHat UAE Client ADWEA

Works Involved:

• Design and detailing of various Power plant structures like Gas Turbine building , Boiler feed pump building and making of detailed engineering /fabrication drawings and interdisciplinary coordination as lead engineer
• 3D modeling in FWP+ and SPEEDIKON. Extensive use of DESIGN REVIEW and INTERFERENCE MANAGER modules of PDS for ensuring clash free models.

Works Involved:

• Design and detailing of various Industrial and Cement plant structures of both RCC & Steel and making of detailed engineering /fabrication drawings
• Design of Cooler Building in RCC with underground conveyor tunnel
• Design of Packing Plant and staircase supporting structure in steel 30.0 m tall

Works Involved:

• Design and detailing of various Industrial and Cement plant structures of both RCC & Steel and making of detailed engineering /fabrication drawings

· Design of Cooler Building in RCC with underground conveyor tunnel

· Design of Packing Plant and staircase supporting structure in steel 30.0 m tall

· Fabrication drawing preparation and joint detailing for

1) Poly ethylene project

2) Engine T/M shop for car manufacturing unit

3) Body shop and Press shop for car factory

· Dynamic analysis & design of foundations for various equipments

a) Cooler Fans

b) Compressors

c) Turbine

· Design of liquid storage tanks & tank foundations on annular raft

· Design of piperacks and foundations for piperacks.

· Tendering including preparation of tender drawings for

a) Water supply project

b) Material handling project for power plant

c) Additional facilities for existing power plants.

· Design of steel chimney and foundations.ly ethylene project

2) Engine T/M shop for car manufacturing unit

3) Body shop and Press shop for car factory

· Dynamic analysis & design of foundations for various equipments

a) Cooler Fans

b) Compressors

c) Turbine

· Design of liquid storage tanks & tank foundations on annular raft

· Design of piperacks and foundations for piperacks.

· Tendering including preparation of tender drawings for

a) Water supply project

b) Material handling project for power plant

c) Additional facilities for existing power plants.

· Design of steel chimney and foundations.

Works involved:

• Design of Transmission line single circuit / double circuit towers and foundations from 132 kv to 800 kv
• Prototype testing of towers for design validation.
• Checking of fabrication drawings for above.