Summary
Overview
Work History
Education
Skills
Accomplishments
Certification
Namedeclaration
Career Experience
Personal Information
Disclaimer
Timeline
Generic
Anand Naidu Siddireddy

Anand Naidu Siddireddy

Rajahmundry

Summary

Highly skilled professional with 13 years of experience in the oil and gas industry. Goal-oriented with a proven ability to successfully lead teams towards achieving company objectives. Prioritizes safety, productivity, and efficiency in all operations. Possesses strong decision-making, leadership, and problem-solving skills, enabling effective communication of company goals to employees and motivation of team members. Extremely attentive to identifying potential problems, minimizing risks, and implementing improvement plans. Hardworking and passionate job seeker with exceptional organizational skills, eagerly seeking an entry-level Drilling Supervisor position to contribute towards the accomplishment of company goals.

Overview

15
15
years of professional experience
1
1
Certification

Work History

Assistant Rig Manager

ADNOC DRILLING COMPANY
08.2020 - Current
  • Assisted in development of contingency plans to ensure minimal disruption during unforeseen events on rig site.
  • Enhanced drilling efficiency by implementing new rig technologies and processes.
  • Supervised daily rig operations, ensuring smooth workflow and increased productivity.
  • Supervised, directed and trained drilling rig crew to comply with safety and operational procedures.
  • Anticipated, troubleshot and resolved operational and equipment issues to minimize rig downtime.
  • Supported Rig Manager in liaising with clients regarding progress updates, ensuring clear communication channels were established at all times.
  • Participated in emergency response planning initiatives to protect personnel and assets during unexpected events or accidents at rig site.
  • Maintained accurate records of all well data throughout each drilling project from inception to completion.
  • Ensure safe, economical and efficient performance of drilling, well completion and workover activities by supervising execution of activities in compliance with company's standards, contractual requirements, Drilling program and current legislation.
  • Liaise on behalf of company with contractor's representative on site regarding contract and interpretation.
  • Check and test periodically efficiency of well control equipment and other safety equipment.
  • Organizing rig crew in move and setting up of the Rig and Camp. Maintaining a close liaison and adhering to proper procedures with company 's requirement.
  • Ensure all appropriate paperwork is completed and maintained in order to ensure reporting routines are fulfilled.
  • Responsible for conducting drills in: evacuation, kick,H2S, fire fighting,spill response and other critical condition that may rise.
  • Conduct full BOP TEST as per Drilling Manual every 14 days.
  • Ensure the stock level of spare parts and consumables for the drilling equipment is kept at an appropriate level by requesting the Participatehenever deemed necessary.
  • Participate in the preparation of the Job Safety Analysis before start up of the non-routine operation or job and ensure completion of risk assessment where required
  • Facilitated strong working relationships with vendors and suppliers to ensure timely delivery of essential materials and services for the rig site.
  • Instruct subordinates of their duties and responsibilities and of any special precaution to be taken prior to start -up of any work.
  • Promptly report any safety hazard,accident, near -miss accident and non-conformance ti his/her immediate superior.

Driller

ADNOC DRILLING COMPANY
02.2016 - 08.2020
  • Rig control & operating system: Top drive National PS 350/500 power swivel, 500 tons static, 350 tons dynamic, 45,800 ft-lbs.
  • Equipment National Oil Well National 110-UE, 2 x GE 752 DC Series Motors, 1500 Mast/Derrick Pyramid, Open Face Cantilever Type, 769 Kips on 12 Lines, 149 ft x 29.2 ft
  • Mud Pumps 2 x Gardener Denver PZ-10, 1350 hp each Rotary Table National C 375, 650 Tons static, 30,000 ft-lbs max
  • @ 180 rpm
  • Main Power 5 x CAT D398, 910 hp ea
  • @ 1,200 rpm Travelling Block Continental Ensco RA-52-6-500, 500 tons, 6 x 52" sheaves

Driller

HELMERIC&PAYNE INC
01.2014 - 12.2016
  • Safely direct rig crews in drilling and other activities, such as setting up
    rigs and completing or servicing wells.
  • Responsible for maintaining full crew during entirety of project and
    ensuring crew is competently performing duties.
  • Train new crew members on standard operating procedures to include,
    but not limited to, proper care and maintenance of rig and drill string,
    including lubrication of equipment and housekeeping.
  • Responsible for enforcement and clarification of Company policies and
    procedures.
  • Connect sections of drill pipe, using hand tools and powered wrenches
    and tongs.
  • Repair or replace defective parts of machinery, such as rotary drill rigs,
    water trucks, air compressors, and pumps, using hand tools.
  • Maintain and adjust machinery in order to ensure proper performance
    Observe pressure gauge and move throttles and levers in order to control
    the speed of rotary tables and to regulate pressure of tools at bottoms of
    boreholes.
  • Maintain records of footage drilled, location and nature of strata
    penetrated, materials and tools used, services rendered and time required.
    Bolt together pump and engine parts, and connect tanks and flow lines.
  • Start and examine operation of slush pumps in order to ensure
    circulation and consistency of drilling fluid or mud in well.
  • Remove core samples during drilling in order to determine nature of
    strata being drilled.
  • Line drilled holes with pipes, and install all necessary hardware, in order
    to prepare new wells.
  • Position and prepare truck-mounted derricks at drilling areas that are
    specified on field maps.
  • Cap wells with packers, or turn valves, in order to regulate outflow of oil
    from wells.
  • Responsible for timely and accurate submission of various reports, such as: drilling report, preventive maintenance/equipment report, safety report, etc.
  • Maintain safety standards and procedures and keep work area in safe
    working conditions.
  • Abide by Company policies and procedures Other duties and special projects as assigned..

Assistant Driller

HELMERIC&PAYNE INC
06.2012 - 01.2014
  • Rig control & operating system: Draw works 1,500 HP powered by 2 - 1,320 HP AC VFD motors
  • Mast Rating 750,000 lb Height 143feet
  • Top Drive TDS-11 HP 500 ton AC VFD motors integrated into mast
  • Setback Capacity Up to 720,000 lb simultaneous setback
  • Mobility Packages 360º walking capability or up to 200 ft straight line skidding
  • Engines / Generators Up to 4 3512 CAT engines (dual fuel capable) / Up to 4 KATO 1205 KW generators
  • Mud Pumps Up to 3 Gardner Denver PZ-11 7,500 psi, 1,600 HP AC triplex pumps
  • Pipe Handling ST-80 iron roughneck; hydraulic catwalk; rotating mousehole

Driller

SHIV-VANI OIL&GAS EXPLORATION
02.2010 - 05.2012
  • Rig control & operating system: joystick VFD-AC Draw works Motor & touch screen BOMCO, ZJ50/3150D14 Mast Height: Clear height -148 Ft
  • Crown Block: BOMCO YC315, 700,000 Lbs
  • Drill line size 1-3/8”
  • Rotary Table: BOMCO ZP375, 37 ½”
  • Draw works: BOMCO JC50D, 1500 HP, 1 3/8” Grooved drum, Max 76,000 Lbs Fast-line Pull, 487,000 Lbs Max Capacity
  • Mud Pump: BOMCO, Model F-1300, 1300 HP, Belt-driven, Dual 752 Traction Motors
  • Power Package: Caterpillar 3512B, SR4 Generators x 3
  • BOP Equipment: Shanghai Petroleum, FH35-35, 13 5/8 - 5M Shanghai Petroleum, 2FZ35-70 Double – 13 5/8, 10M Shanghai Petroleum, FZ35-70 Single – 13 5/8, 10M Jinhu Petroleum Choke Manifold, 3” 10M Beijing Petroleum FKQ720-6 Accumulator, 6 stations

Trainee Assistant

FOCUS ENERGY
04.2009 - 12.2009
  • Monitor repair of high pressure pump and associated valves, align mud system valves and transfer fluid from one pit to another.
  • Inspect safety lines ropes, air hoists, monkey board, derrick fingers,
    stabbing boards, sheaves, crown blocks, derrick bolts, pins, welds, and
    other equipment related to derrick utilizing proper safety equipment,
    mixing drilling fluids and chemicals.
  • Monitor mud properties and perform calculations, recognize warning
    signs of kicks and stab casing from casing stabbing board.
  • Understand purpose of blow-out prevention equipment and assist in
    nippling them up and down.
  • Perform as driller as and when required, act as lead hand when working
    on rig floor, supervise personnel per driller instructions, train drill
    crew.
  • Identify and set priorities for work, direct and coordinate crew
    members in performing work, verify that appropriate tools and
    equipment are available and in working order at appropriate time.
  • Use and store hand and power tools, handle drill string hoisting and
    rotating equipment.
  • Keep driller informed of needed operating supplies such as fuel,
    lubricants, and mud and replacement parts for pumps and advise of unsafe conditions on rig and in derrick.

Education

Bachelor's Degree - Mechanical Engineering

SINGHANIA UNIVERSITY
Pacheri Bari, Jhunjhunu - 333515, Rajasthan, India
07.2025

XII th -

Aditya college
Rajahmundry, Andhra Pradesh
01.2005

Xth -

Chaitnya Schools
Rajahmundry, Andhra Pradesh
01.2003

Skills

OPERATIONAL SKILLS

  • Stuck pipe, kick, H2S and other influx threat, equipment failure, understanding well behavior (Emergency Response Planning)
  • Fishing old completion tubing and other junks from well bore
  • Supervision and training crew for safe working practices
  • Helped clients in curing loss occurred in different formation and while cementing different casing
  • Air drilling, Loss circulation mud, oil based mud (Drilling Fluids Management)
  • Safety Protocol Implementation
  • Operational Efficiency Optimization
  • Drilling for core samples, handling core at surface with high concentration of h2s
  • Handled wirelines surveys and their rig ups during exploration stage and well intervention stages(Oilfield Services Knowledge)
  • Personnel Supervision Competence
  • Drilling Operations Management
  • Safety Management, Job Planning, Risk Management
  • Task Prioritization

TROUBLE SHOOTING AND MAINTAINENCE SKILLS

  • Perform drill line slip and cut after a defined ton mile
  • Follow and adhere to preventive system emphasis on lubrication and greasing of every rotating or moving equipment
  • Mud pump maintenance and replacement of liners ,piston and modules assemblies as required
  • Changing bop rams as per next sequential run of BHA or string, replacing parts and rubber element when required
  • Well control equipment function test and pressure test as required(Well Control Expertise)
  • Rig Equipment Maintenance
  • Preventive Maintenance

PERSONAL SKILLS

  • Good interaction with team member to coordinate job tasks
  • Excellent written, oral &intra personal communication skills
  • Strong problem analysis and resolution skills
  • Good timekeeper
  • Communication and Interpersonal Skills
  • Time management expertise
  • Continuous Improvement Mindset
  • Technical report writing
  • Inventory control proficiency
  • Teamwork and Collaboration
  • Problem-solving abilities
  • Attention to Detail
  • Crew Supervision
  • Emergency Response Planning

Accomplishments

  • Drilled several vertical& Horizontal wells
  • Performed various workover activities in the gas&oil wells.(completion changes,Plug & Abandonment,Acidizing, Reperforating zones, Changing the configuration of casing, Side tracking using Whip stock, Fishing the old completion and Junk in the well, Killing the live well (Bull heading), Milling casing, packers, Plugs, Cement plug jobs, Setting temporary packer packers for replacing Well head and solving surface well control equipment problems. Isolating Zones with packers, Run different sets of completion, Coil Tubing, Fracking, Flaring
  • Cut window, drilling & completed several short radius wells successfully.
  • Coring, well killing& fishing of Drilling &completion strings several times.
  • Drilled & completed several ERD wells with ADNOC Onshore project.
  • Drilled & completed several multi lateral wells.
  • Drilling fluid used Water Base , Oil Base & Polymer mud/ salt saturated.
  • Complete knowledge of Drilling Equipments, Rig Moves & Safe Practices.
  • GOOD Knowledge on new WORK MANAGEMENT SYSTEM tool.
  • Major overhauling, assembling nov-ac driven top drive onboard with proper support.
  • Major overhauling, assembling of 18 3/4", 13 5/8" 10k stacks on board with OEM Support.
  • Commissioned several different configuration Rigs at the Yard and was involved in several periodical & Defective maintenance of the Rigs.

Certification

  • IWCF Level #3&4 Surface BOP Stack, Drilling Training Center, ADNOC DRILLING, Abu Dhabi, UAE, VC3S-00077414-SA-1GKN
  • ADNOC'S WORK MANAGEMENT SYSTEM(FULL PACAKAGE) CERTIFIED USER
  • CERTIFIED APPOINTED LIFTING SUPERVISOR COURSE AND BANKSMEN
  • RIGGING AND SLINGING
  • CERTIFIED FIRST AIDER
  • H2S
  • WORKING AT HEIGHT AND RESCUE FROM HEIGHTS
  • BEHAVIOR BASED SASFETY
  • ADVANCED FIRE FIGHTING
  • STUCK PIPE PREVENTION
  • AUTHORIZED GAS TESTER
  • BOSIET - OPITO Approved, Certificate of Proficiency in Personal Safety and Social Responsibilities. Helicopter Underwater Escape & Sea Survival Techniques. Personal Survival Techniques & Elementary First Aid.

Namedeclaration

Anand Naidu Siddireddy

Career Experience

  • ADNOC DRILLING COMPANY, Abu Dhabi, UAE, Assistant Rig Manager, 08/01/20, Present, 3 Years, IWCF Level #3&4 Surface BOP Stack, VC3S-00077414-SA-1GKN, CR-375526
  • ADNOC DRILLING COMPANY, Abu Dhabi, UAE, Driller, 02/01/16, 08/01/20, 4 Years 6 Months
  • HELMERIC & PAYNE INC, Abu Dhabi, UAE, Assistant Driller, 06/01/12, 01/01/14, 1 Year 7 Months
  • HELMERIC & PAYNE INC, Abu Dhabi, UAE, Driller, 01/01/14, 12/01/16, 2 Years 11 Months
  • SHIV-VANI OIL & GAS EXPLORATION, K.G PROJECT, India, Driller, 02/01/10, 05/01/12, 2 Years 3 Months
  • FOCUS ENERGY, ONSHORE BARMER PROJECT, Rajasthan, India, Trainee Assistant, 04/01/09, 12/01/09, 10 Months

Personal Information

  • Date of Birth: 04/08/88
  • Nationality: Indian

Disclaimer

I hereby declare that the particulars furnished above are true to the best of my knowledge and belief.

Timeline

Assistant Rig Manager

ADNOC DRILLING COMPANY
08.2020 - Current

Driller

ADNOC DRILLING COMPANY
02.2016 - 08.2020

Driller

HELMERIC&PAYNE INC
01.2014 - 12.2016

Assistant Driller

HELMERIC&PAYNE INC
06.2012 - 01.2014

Driller

SHIV-VANI OIL&GAS EXPLORATION
02.2010 - 05.2012

Trainee Assistant

FOCUS ENERGY
04.2009 - 12.2009

XII th -

Aditya college

Xth -

Chaitnya Schools
  • IWCF Level #3&4 Surface BOP Stack, Drilling Training Center, ADNOC DRILLING, Abu Dhabi, UAE, VC3S-00077414-SA-1GKN
  • ADNOC'S WORK MANAGEMENT SYSTEM(FULL PACAKAGE) CERTIFIED USER
  • CERTIFIED APPOINTED LIFTING SUPERVISOR COURSE AND BANKSMEN
  • RIGGING AND SLINGING
  • CERTIFIED FIRST AIDER
  • H2S
  • WORKING AT HEIGHT AND RESCUE FROM HEIGHTS
  • BEHAVIOR BASED SASFETY
  • ADVANCED FIRE FIGHTING
  • STUCK PIPE PREVENTION
  • AUTHORIZED GAS TESTER
  • BOSIET - OPITO Approved, Certificate of Proficiency in Personal Safety and Social Responsibilities. Helicopter Underwater Escape & Sea Survival Techniques. Personal Survival Techniques & Elementary First Aid.

Bachelor's Degree - Mechanical Engineering

SINGHANIA UNIVERSITY

Similar Profiles

  • Hamad Alblooshi

    Hamad AlblooshiHamad Alblooshi

    Mechanical engineer at Adnoc DrillingMechanical engineer at Adnoc Drilling

    View Profile
  • Arunsaiprasanth Sampathkumar

    Arunsaiprasanth SampathkumarArunsaiprasanth Sampathkumar

    Senior cementing operator at ADNOC DrillingSenior cementing operator at ADNOC Drilling

    View Profile
  • Abderaouf NECHAKH

    Abderaouf NECHAKHAbderaouf NECHAKH

    Sr. Technical Engineer Production Enhancement at ADNOC Drilling OFSSr. Technical Engineer Production Enhancement at ADNOC Drilling OFS

    View Profile
Anand Naidu Siddireddy