ANIL KR. TRIPATHI
Senior Engineer
Summary
Technically competent professional for providing deft solutions in Energy, Industry and oil and Gas automation (DCS, PLC), Process Control & Instrumentation & with + 15 years of basic and details engineering, experience in managing, engineering, procurement.
Overview
16
16
years of professional experience
Work History
SENIOR ENGINEER I&C
SS GAS LAB ASIA PVT LTD
05.2022 - Current
- PROJECT COMPLETED: Also physically visited the below country
- JUBAIL 3A, Independent Water Plant (IWP), Saudi Arabia.
- TEMIS, N2O Generation Plant, Poland (Europe).
- JUBAIL 3B, Independent Water Plant (IWP), Saudi Arabia.
- BARKA V IWP- RO Desalination Plant, Oman
- RUNING PROJECT: Engineering for Carbon Capture Plant (150 Kg/hr.) at 10 MW Capacity Boiler, Australia.
- JOB RESPONISIBILITIES:
- Prepared and reviewed electrical and instrumentation design documents, such as P&IDs, wiring diagrams, loop diagrams.
- Ensured compliance with project specifications, standard codes, and industry standards
- Actively participated and contribute to key engineering milestones, including
- 3D Model Reviews: Participated in 30%, 60%, and 90% 3D model reviews, focusing on the E&I scope, ensuring proper placement of equipment, cable trays, and accessibility.
- P&ID Review: Reviewed and finalize Process & Instrumentation Diagrams (P&IDs), ensuring accuracy in instrumentation.
- Logic Reviews: Reviewed control logic and interlocks to ensure alignment with project specifications.
- PSSR: Participated in Pre-Startup Safety Review (PSSR) for projects, ensuring that all E&I systems are safely commissioned and ready for operation.
- Instruments list preparation, Datasheet preparation for instruments, Signals list preparation, ICS (Interconnection connection schedule used for instruments to DCS Signals flow diagram. Instruments Indent preparation. Technical PO Reviewed, Vendor offer review for different instrument PLC and MCC Panel drawing review.
- Cable tray and Cable quantity find out through help of #3D Drawing.
- Loose materials list prepared for skid preparation and send for site.
- Virtually inspection or physically after confirmation from vendor end for ready materials
- Testing of control logic (open loop & close loop) in simulation environment and do check linking with graphics.
- Client and Vendor Coordination:
- Coordinate with clients and vendors as required to resolve technical issues and ensure timely approval of E&I deliverables.
- Interface with clients during reviews to address concerns related to the E&I scope of the project.
- Procurement & Vendor Coordination:
- Supported the procurement process by preparing technical specifications and reviewing vendor quotations for electrical and instrumentation equipment.
- Liaise with vendors to resolve technical queries and ensure timely delivery of materials.
- Factory Acceptance Tests (FAT) & Internal Factory Acceptance Tests (IFAT):
- Conduct and oversee FAT and IFAT for electrical and instrumentation components such as skids, panels, analyzers, motors, and other key equipment.
- Ensured that equipment meets design specifications and quality standards before shipment to the site.
- Resolve any issues identified during FAT and IFAT in coordination with vendors, ensuring compliance with project timelines and quality expectations.
- Ensured the proper documentation of all FAT and IFAT activities and generate reports for client review
- Control philosophy and control logics reviewed for CO2 STORAGE & DOSING SYSTEM and CO2 Generation Plant.
- Commissioning & Post-Commissioning Support:
- Participate in commissioning activities and support troubleshooting efforts.
- Provide technical input during site acceptance tests (SAT) and post-commissioning technical support.
- Remotely support to the client and issue resolve by virtually with help of remote.
- Site Supervision & Installation:
- Provided technical support for the installation of electrical and instrumentation equipment, ensuring adherence to design specifications.
- Assist in conducting site inspections and pre-commissioning checks and provide support remotely and physically.
DCS ENGINEER
GE POWER INDIA LIMITED
03.2021 - 05.2022
- Project: Solapur Thermal Power Project 2
- 660 MW
- Client: NTPC Solapur, India
- JOB RESPONSIBILITIES:
- Logics and Graphics modification as per requirement of customer.
- Availability test started for unit.
- Antivirus Upgrade for system.
- Working for AMC.
- System Installation for RTDS, OWS, LVS and Engineering Workstation.
- Commissioning of GIU (Graphical interface Unit)
DCS ENGINEER
TOSHIBA JSW POWER SYSTEMS PVT LTD.
07.2018 - 03.2021
- Project : Harduaganj Thermal Power Project: 1x660MW
- Client : UPRVUNL- India
- JOB RESPONSIBILITIES:
- Detailed Hardware Engineering: IO assignment, FG grouping, Card Layout with device redundancy maintained, Network architecture.
- Hardware configuration: Review IO list, IO assignment, Modification in Cable Schedule Engineering for DCS.
- Thoroughly involved in hardware of TOSHIBA System and troubleshooting TOSMAP Controller TOSMAP-EV500.
- Implementation of control logic and process graphics in DCS TOSMAP.
- Prepare Plant Graphics/HMI main screens (static & Dynamic), Popup windows, Faceplates and do linking with control logics.
- Testing of control logic (open loop & close loop) in simulation environment and do check linking with graphics.
COMMISSIONING ENGINEER (DCS)
ALSTOM INDIA LTD
01.2015 - 07.2018
- Project : Thermal Power Plant 2x660 MW
- Client : NTPC (Mouda) – India
- JOB RESPONSIBILITIES:
- Implementing Logic Diagrams for Open Loop and Closed loop controls.
- Developing the HMI Graphic pages according to the P&ID and mapping the respective signals with the MIMIC according to the IO list.
- Working with ALSPA SERIES-6 (MFC 3000) CONTROLPLANT DCS in configuration of Alarms, Trends, History and Reports as per the Engineering Documents.
- Upgrade latest firmware in MFC, UT-156 & IO Card and replacement of faulty Controllers, IO Cards, & Power module.
- Implementing the Control architecture in Factory setup which includes, interconnecting and powering up of all Cabinets, OWS, Clients & Servers, and Printers etc.
- Testing of all System Cabinets and marshalling cabinets, along with their response time for Analog and Digital signals, Change over time between the Primary and Redundant servers.
- Participate in software and Hardware (Integrated) Factory Acceptance Test of control System.
- Implementing the design changes and corrections made during FAT, maintaining proper documents for the changes made and submitting the documents to Clients as well.
INSTRUMENTATION ENGINEER
SIGMA-C INFRASTRUCTURE PVT LTD.
12.2013 - 12.2014
- Project : Thermal Power Plant 2x550 MW
- Client : UPRVUNL ANAPARA SONEBHADRA
- JOB RESPONSIBILITIES:
- Installation & Commissioning of field instruments
- Erection of I/O Panels, Junction Boxes, Instruments as per Drawings, PID & Hook-Up drawings, and commissioning of Instruments.
- Junction box wiring, ferule printing.
- Cable schedules / interconnection schedule for DCS.
INSTRUMENTATION ENGINEER
ENTECH PVT LTD.
07.2011 - 04.2013
- Project : Thermal Power Plant 2x550 MW
- Client : UPRVUNL ANAPARA SONEBHADRA
- JOB RESPONSIBILITIES:
- Installation & Commissioning of field instruments
- Wring activities as per Interconnection schedule for junction box, PLC Panel, MCC Panel.
- LCP Panel, ferule printing.
- Cable schedules / interconnection schedule for DCS.
COMMISSIONING ENGINEER
POWER-TRONIX PVT LTD
06.2010 - 07.2011
- JOB RESPONSIBILITIES:
- Calibration of field Instruments.
- Erection of I/O Panels, Junction Boxes, Installation of Instruments as per Drawings, PID & Hook-Up drawings and commissioning of Instruments.
- Troubleshooting of Instrument calibrations and panel wirings.
Education
DIPLOMA - Electronics & Communication
Integral university
Lucknow01.2010
12th - undefined
Government Inter College
ANPARA01.2006
10th - undefined
Government Inter College
ANPARA01.2004
Skills
- Instrumentation Engineering: P&ID Review, Instrument Index, Instrument Datasheets, Signal Lists, I/O Lists, Instrument Selection of Instruments & Specification, Hook-up Drawings, Instrument Location Drawings, Loop Diagrams and Installation Engineering, Basic and details engineering
- Engineering & Design: Basic & Detailed Engineering, 3D Model Reviews, Cable Schedule, Interconnection Schedule, Cable Tray Engineering, BOM Estimation and Engineering Database Preparation
- Vendor & Client Coordination: Technical Specification, RFQ & Vendor Offer Review, Technical PO Review, Vendor Document Review, ITP, NCR Resolution, Client Coordination and Technical Query Resolution
- Process Applications: CO2 Storage & Dosing Systems, CO2 Generation Plant, Thermal Power Plants, Water Desalination/IWP and Industrial Automation
- Electrical Interface: MCC/PLC Interface, DOL & Star-Delta Starter Drawing Review, MCB, Contactor, Relay and Cable Selection
- FAT / IFAT / SAT: DCS/PLC FAT, IFAT, Integrated System Testing, Hardware & Software Testing, Logic Testing, I/O Testing, Graphics Verification, Vendor Coordination and Punch-List Closure
- Commissioning: Documents preparation, Loop Checking, DCS/PLC I/O Verification, Control Logic Testing, Interlock Testing, Pre-Commissioning, Commissioning, SAT Support and Troubleshooting
- PLC & Automation: PLC Engineering, Control Logic Development & Review, Open/Closed Loop Control, Sequence Logic, Interlocks, Permissive, PLC Panel Design Review and PLC/DCS Interface
- PLC Platforms: Schneider PLC M580 and HMI Vijeo Designer, Siemens-S7-1500
- Process Control & HMI: Control Philosophy, Process Control, HMI/Graphics Development, Faceplates, Alarms, Trends, Historian, Reports and Logic-to-Graphics Integration
Timeline
SENIOR ENGINEER I&C
SS GAS LAB ASIA PVT LTD
05.2022 - Current
DCS ENGINEER
GE POWER INDIA LIMITED
03.2021 - 05.2022
DCS ENGINEER
TOSHIBA JSW POWER SYSTEMS PVT LTD.
07.2018 - 03.2021
COMMISSIONING ENGINEER (DCS)
ALSTOM INDIA LTD
01.2015 - 07.2018
INSTRUMENTATION ENGINEER
SIGMA-C INFRASTRUCTURE PVT LTD.
12.2013 - 12.2014
INSTRUMENTATION ENGINEER
ENTECH PVT LTD.
07.2011 - 04.2013
COMMISSIONING ENGINEER
POWER-TRONIX PVT LTD
06.2010 - 07.2011
10th - undefined
Government Inter College
12th - undefined
Government Inter College
DIPLOMA - Electronics & Communication
Integral university