Aniruddh Ijardar
Instrument Engineer / Instrument Technician
Surat
Summary
More than 4 years of experience in Maintenance, commissioning, Pre-commissioning and start up in oil and Gas, Petrochemical, off-shore, platforms and shutdown activates as Instrument Engineer and Instrument Technician.
Overview
4
4
years of professional experience
Work History
Instrument Engineer
Sterling & Wilson Pvt Limited.
12.2023 - Current
- Hands-on panels like Schrack Sonnet fire alarm control panel, Rockwell Automation solution & services PLC panel, and software like Integral IP, Aadvance, and FactoryTalk View Site Edition.
- Integration of existing gas detectors of existing Delta V Panel with Rockwell PLC panel.
- Integration of Gas turbine GE Mark V, existing gas detectors and heat detectors to Fire alarm control panel (FACP).
- Work on panel wiring and programming of fire alarm control panel (FACP), gas release panel (GRP), and gas detection system (GDS) PLC panel.
- Witness with client of Gas detection system (GDS) and Fire detection system (FDA).
- Prepare to hand over documents for SAT (site acceptance test) and FAT (factory acceptance test).
- Loop checking of all detectors, field MCP, hooter, beacon, and alignment of open path gas detector (OPD).
- Work on wiring and programming of fire damper.
Instrument Technician
OQ OMAN
10.2023 - 11.2023
- Work on Siemens steam turbine: STG600, and compressors: 2MCL 356, 2MCL 485, 2BCL306/A, 2BCL305/A, and gearboxes and GE motors.
- Removal and box up of all vibration sensors like radial probe, axial probe, Key phasor, speed probe, sysmatic probe, and temp elements.
- Upgradation of Bentley Nevada 3500 system's all safety barriers of temperature elements and vibration sensors.
- Linearity test, loop test and function test of vibration sensors using TK-3E.
- Calibrations of all transmitters, control valves, and pressure switches.
Instrument Engineer
Sterling & Wilson Pvt Limited
03.2023 - 09.2023
- Installation and calibration of gas detection systems's gas detectors like hydrocarbon (HC), hydrogen sulfide (H2S), hydrogen (H2), chlorine dioxide (CLO2), and open path gas detector(CH4).
- Installation of addressable fire detection system(FDA) detectors of
like smoke detector, heat detector, multi smoke detector, flame detector, duck detector, beam detector. - Installation of manual call point (MCP), Relay Module (RM), Monitor Module (MM),hooter, beacon, Voice over Internet (VoIP), and Power over Ethernet (PoE).
- Cable laying, dressing, glanding, crimping, and termination of various types of cables like pair cable, triad cable, 10 triad cable, fiber optic cable, CAT6, and power cable up to 185 sqmm.
Instrument Technician
Bapco Bahrain
12.2022 - 02.2023
- Hands on various types of positioners like Fisher DVC-6000, DVC-6200, Neles Metso ND9000, Masoneilan SVI-1, SVI-2, Siemens PS2, Baker Hughes STI, Samson 3730-3.
- Calibration and stroke check of control valve and ON-OFF valve.
- Worked on experience in ESDV, SDV & Antisurge valve.
Instrument Technician
Comsip Electrical, Instrumentation Engineering
08.2022 - 11.2022
- Calibration and maintenance of various types of instruments like pressure, flow, level, temperature transmitters, switches, control valves, and on-off valves.
- Removal and Box up of control valve Accessories like air filter regulator, solenoid operated valve, positioner, limit switch, volume booster, Trip valve, Airlock Relay, pilot valve, and Tubing.
- Worked on Fisher control valve (657, 667), on/off valve, single and double action valve.
- Servicing, calibration, stroke checking, and spare part changing in control valve.
Instrument Supervisor
Emerson Process Management
08.2020 - 08.2022
- Inspection of instrument construction activities, such as field instrument installation, cable meggering, termination inspection, impulse tube hydro testing, witness for loop test function test, cause effect, punch verification (field & DCS), cold and hot activity, arrange & update all required documents, calibration job, control valve signature test, commissioning & start up, and troubleshooting activity.
- Installation of instruments like pressure transmitters, level transmitters, flow transmitters, temp transmitters, pressure switches, level switches, flow switches, temp switches, and gauges.
- Loop test, inspection, function test, and cause & effect from field to device.
- Update all documents, P&ID, ILD (Instrument loop diagram), hook up calibration job, site acceptance test, run, and punch list verification.
- Maintenance of all types of transmitters, control valves, on-off valves, switches, and vibration probes.
- Execute preventive and corrective maintenance jobs, including troubleshooting, repair, overhaul, and calibration of different types of field instruments in the assigned plant/unit.
- Carry outside visit assigned by Senior Reliability Engineer to collect the data information and record for various equipment and unit.
- Coordinate report any requirement of additional support from civil, mechanical, electrical, workshop, or any other section in order to create sub-order follow-up with the concerned section to complete the assigned job effectively.
- Work on Analyzers: Servomax O2 2500, Siemens Maxum 2, pH Rosemount 2081, and Conductivity Rosemount 5081P, Silica, Continuous emission monitoring systems (CEMS), and sulfur oxides (SOx), and nitrogen oxides (NOx).
Education
Bechelor of Engineering - Instrumentation & Control Engineering
Surat, India 04.2001 -
Gujrat Secondary& Higher Secondary Education Board - Science Stream(HSC)
RSM Poonawala Experimental School
Surat, India 04.2001 -
Gujrat Secondary& Higher Secondary Education Board - (SSC)
P.R.Khatiwala Vidhya Sankul
Surat, India 04.2001 -
Skills
Installation and Commissioning
Maintenance
Troubleshooting and resolution
Calibration
Documentation & report
Dcs & PLC system
Loop checking
Hazard analysis
Hands on Equipment
- HART Communication Protocol (Emerson 375,475 & Trex device Field Communicator).
- Fluke-754 Documenting Process Calibrator.
- Fluke 725 and 725Ex Multifunction Process Calibrator.
- Fluke 289 Multimeter.
- Dead weight tester and oil comparator.
- pneumatic and Hydrolic Hand Pump.
- RTD and Thermocouple Calibrator like Decade Box, Temperatur Bath.
- Vibration Calibrator- TK3E WOBULAOTR.
- Mili-Amps Sources- JOFRA, BETA, FLUKE, FLUKE 707
Languages
English
Hindi
Gujarati
Training Attends
- PTW System
- H2S Awareness and escape
- LOTO System
- Job hazard analysis
Declaration
I hereby declare that all the information is true to the best of my knowledge. I hope you will consider my ability to posted position.
Timeline
Instrument Engineer
Sterling & Wilson Pvt Limited.
12.2023 - Current
Instrument Technician
OQ OMAN
10.2023 - 11.2023
Instrument Engineer
Sterling & Wilson Pvt Limited
03.2023 - 09.2023
Instrument Technician
Bapco Bahrain
12.2022 - 02.2023
Instrument Technician
Comsip Electrical, Instrumentation Engineering
08.2022 - 11.2022
Instrument Supervisor
Emerson Process Management
08.2020 - 08.2022
Bechelor of Engineering - Instrumentation & Control Engineering
04.2001 -
Gujrat Secondary& Higher Secondary Education Board - Science Stream(HSC)
RSM Poonawala Experimental School
04.2001 -
Gujrat Secondary& Higher Secondary Education Board - (SSC)
P.R.Khatiwala Vidhya Sankul
04.2001 -
Similar Profiles
Devashish JoshiDevashish Joshi
Trainee at Sterling & Wilson Renewable Energy LimitedTrainee at Sterling & Wilson Renewable Energy Limited
Mohammad HabeebuddinMohammad Habeebuddin
DG Operator at Sterling & Wilson Pvt LtdDG Operator at Sterling & Wilson Pvt Ltd
Balakrishnan RBalakrishnan R
Deputy Manager at Sterling and Wilson Renewable Energy LimitedDeputy Manager at Sterling and Wilson Renewable Energy Limited
Deepu FrancisDeepu Francis
Assistant General Manager – International Marketing & Business Development at Larsen & ToubroAssistant General Manager – International Marketing & Business Development at Larsen & Toubro
GAURAV PATELGAURAV PATEL
Assistant Manager B2B at Bharti AirtelAssistant Manager B2B at Bharti Airtel