Arun Kumar
Gurugram
Summary
Dynamic quality-focused professional with extensive experience at JBM Group, excelling in MIG welding and root cause analysis. Proven track record in implementing IATF 16949 standards and enhancing process audits. Skilled in manpower handling and customer relations, driving continuous improvement and achieving significant reductions in defects.
Overview
9
9
years of professional experience
1
1
Certification
Work History
Sr. Executive
JBM Group
Gurgaon
2025.07 - Current
- Taking care of the responsibilities of the MIG welding section as a section in charge.
- Daily morning meeting with the team regarding the internal and customer issues, and action on it.
- Verify the in-process adherence-related checkpoints as per the control plan.
- Monitor manpower deployment, as per the skill matrix, and the skill-upgradation plan, as per TNI.
- Ensure F/M/L part inspection with reports.
- Cross-verify PY as per the plan, and find the improvement if needed.
- Ensure 4M change management practice adherence.
- Redbin and rework analysis.
- FMEA review as per plan, and update the control plan accordingly.
- Accuracy monitoring and plan for upgrading as per requirements.
Sr. Engineer Quality
SKH Metals
Manesar
2023.11 - Current
- Daily meeting with team members regarding line issues and tasks.
- Responsible for the documentation preparation as per QMS, and its control.
- Root cause analysis, containment, correction, and corrective action for internal and customer feedback.
- SMIR and revalidation submission to the customer for Maru-A parts.
- Analysis of the supplier part issue with SQE and containment planning until correction in the tool.
- I worked with the NPD/CFT team on a new project.
- Rework and red-bin analysis, and a plan for the reduction to improve the PPM.
- Weld parameter verification and validation with the production team.
- Final inspection of all assembly, dock audit, and M1 dock audit.
- Product audit as per MIS-P, and process audit as per PCS, to meet customer requirements.
- Handling four engineers and forty-eight CMP.
- Critical parameters monitoring and updates on the MSIL portal.
- Maintain the accuracy of the part, and plan for improvements.
- Evaluation, re-evolution, training need identification, and plan for the trainings to the quality supervisors and inspectors as per requirement.
- Jig fixture correction as per the requirements.
Quality/QMS Engineer
Wuling Motors India
Halol
2022.02 - 2023.11
- Ensuring the quality of material, starting from incoming to finished goods, including in-process quality.
- Firsthand analysis of defects for providing containment solutions for line problems, and timely communication with the concerned supplier to minimize line/production loss.
- Monitor the change management process and the deviation taken for the temporary change.
- PRR Report and One-Pager
- Responsible for the coordination with the supplier and weld CFT for new parts, improvement parts trail, and EWO/ECN.
- Lead a team of 50+ inspectors and 3 supervisors.
- Monitoring and analysis of all quality records, quality data, and daily check sheets, as well as in-process check sheets, for the effectiveness of the process.
- Maintain the accuracy (PIST) of Assy.
- Conduct quality audits (product and process) to ensure that the products meet the customer’s specifications.
- Skill upgradation, TNI, trainings, and deployment as per skill level.
Quality Engineer
VG Auto Component
Ahmedabad
2017.01 - 2022.02
- Maintaining accurate data and graphs on a daily basis, highlighting the problematic areas, if any.
- MSA (Gauge R&R) execution is as per plan.
- Cp and Cpk study for new phase projects.
- Ensuring part inspection on R.G. (FOA, MOA, and LOA).
- Submission of SMIR for MARU-A part, as per schedule.
- Responsible for the CAPA (A3 in Suzuki/MSIL) analysis for the raised problem.
- Daily meeting with the concerned area regarding rework and rejection on the red bin.
- Cross-verify Poke-Yoke sensors and their implementation as needed.
- Verify the quality documents on a daily basis (defect tracking sheet, part inspection report on RG, SMIR, nugget test sheet, carbon test, P-Y check sheet, and 4M change).
- Jig fixture correction to make the part qualified on RG.
- Welding Process Tests: Tip dressing adherence, NDT test, destructive test, torque test, and UTM test.
- Planning for parts inspection and preparation of supply.
Education
B. TECH - ME
06.2017
12TH - PCM
06.2013
10TH - General
05.2011
Skills
- Welding (Spot, Mig, Projection & Stud)
- Jig & Fixture adjustment
- Root Cause Analysis
- A3/CAPA
- Core Tools
- IATF 16949:2016
- ISO 9001:2015
- 7 QC Tools
- 6M, 3K, 3G & 5S
- GD&T
- Manpower Handling
- Customer Dealing
- Product Audit
- Process Audit
- Internal Audit
- KAIZEN
- Validation/Revalidation
- Skill Evaluation
- Poka-Yoke
Certification
- 5 Core Tools of QMS
- CQI-15 Welding Assessment
- Lean Manufacturing Tools
- IATF 16949:2016 QMS Internal Auditor
Hobbies and Interests
- Travelling
- Yoga
- Cycling
Languages
- Hindi
- English
- Haryanvi
- Gujarati
Personal Information
- Father's Name: Tejpal Singh
- Date of Birth: 01/01/96
- Gender: Male
- Nationality: Indian
- Marital Status: Married
Disclaimer
I, Arun Kumar, hereby declare that the information contained herein is true and correct to the best of my knowledge and belief.
Timeline
Sr. Executive
JBM Group
2025.07 - Current
Sr. Engineer Quality
SKH Metals
2023.11 - Current
Quality/QMS Engineer
Wuling Motors India
2022.02 - 2023.11
Quality Engineer
VG Auto Component
2017.01 - 2022.02