Summary
Overview
Work History
Education
Skills
Certification
Languages
Timeline
Generic

Binny Varkey

Navi Mumbai

Summary

Electrical Engineer with 14 years of experience in Data Center Operations, Electrical Design, and Critical Facilities Management. Proven track record of ensuring 100% uptime in Tier-3 and Hyper-scale Data Centers. Skilled in project execution, vendor management, compliance audits, and energy optimization. Pursuing MBA in Operations Management to enhance leadership capabilities.

Overview

16
16
years of professional experience
1
1
Certification

Work History

Assistant Shift Manger

ST Telemedia Global Data Centres Pvt Ltd
08.2021 - Current
  • Managing end-to-end Data Center operations, ensuring uptime, efficiency, and compliance in a mission-critical environment.
  • Taking responsibility for the seamless operation of critical environments at Hyperscale Data Center
  • Maintaining Critical and Non-Critical Equipment’s on 40 MW contract demand and with 28.40 MW design capacity Data Centre at Navi Mumbai, with G+7 Building
  • Managing operation & maintenance of Utility Services –220 KV GIS, Air cooled Chiller, PAC System, Prime-Rated DG Set, UPS System, Electrical Systems, and Fire Protection Systems includes “Pre-action System, Foam Flooding for HSD yard, Water Mist System, VESDA, Gas Suppression system and Fire Hydrant System”.
  • Handled Critical Tier-3 Enterprise Data center of Dadar, Mumbai with 100% service availability with team size of 50.
  • Scheduling monthly calls with internal DG, BMS stakeholders for further improvement points, Review the incidents & resolutions.
  • Managing space management, power & cooling for customer racks.
  • Coordination of Day-to-day activities
  • Preparing and Executing Planned, Unplanned, Emergency & Periodic (Quarterly, Half yearly and Annually) Shutdown Activities for equipment and communicating the same internally to the stakeholders & to the customers.
  • FAT (Witness testing) of all equipment before commissioning and Part of LO to L4 & IST witness of all critical equipment and validate sequence of operations as well.
  • Managing modification work, project activities, technical evaluation, load management prospective site customers
  • Preparation of the annual 52-week PPM calendar for each equipment.
  • Arranging online and Offline PPM for Critical Equipment’s viz. UPS, FWU, PAC, DG Sets, Transformers, Building
  • Proficient in SNOW portal for Incident management process, service request, change request management process, problem management, service level management process.
  • Preparing Operation Dashboard, PUE, Diesel consumption, Monthly Reports for Major customers and submitting them on Scheduled timeline.
  • Preparing of RCA, 5 Why analysis, CAPA Analysis Reports.
  • Adhere to the Customer SLA, like incident notification, RCA submission within given Time period.
  • Preparation of EOP, SOP of all equipment.
  • Supervise engineering team to ensure adherence to standard operating procedures, sequence of operations and maintenance standards to guarantee execution of periodic maintenance program and maintenance PPM calendar
  • Implementation of ISO 9001:2015 Quality Management system, ISO-14001 environmental safety, ISO- 50001 for Energy Management system (EMS), ISO-20000 for IT service management (ITSM), ISO-27001 for information security management systems (ISMS)

Senior Electrical Design Engineer

L&T Technology Services
08.2018 - 06.2021
  • As per the client requirement designing of Electrical schematics and generating reports like Summarized part list (BOM), Connection List, Enclosure Legend, etc. in EPLAN Electric P8.
  • Designing of MS, SS Control & Automation Panels, VFD Panels in EPLAN Electric P8 and Panel Layouts in EPLAN Pro-panel.
  • Designing of 3D Panel Arrangements and done proposed wire routing in EPLAN Pro-panel.
  • Design of Wire harnessing in 3D and generation of manufacturing documentation in the form of 2D Nail-board drawings and reports like BOM, cable reports, Wire harness report etc. in EPLAN Harness ProD
  • Creation/change of Bill of materials, Materials, Documents in SAP (Systems Applications and Products).
  • Knowledge of SAP Material Master, Part code Creation, BOM Making.
  • Follow ECR process in SAP to upload the updated drawings and creation of new version.
  • Preparing weekly PSR (Project Status Review) based on task given and discussion with clients based on review comments.
  • Coordinate with the team and deliver the tasks on time with good quality.
  • Projects handled for the different OEMs & Multi-National Companies.
  • Detailed engineering activities which include:
  • Perform details of engineering activities which include:
  • Single line diagram, GA diagram, schematic diagram preparation.
  • Knee point voltage calculation for Class X CT which is used for restricted earth fault and Differential protection Relay.
  • Voltage drop for bus bar and power and control cable
  • Temperature rise for busbar.
  • Transformer sizing & Lighting calculation.
  • Design calculation of lighting distribution load & Power distribution load.
  • Minimum cross-section of bus bar according to fault current.
  • Current carrying capacity of bus bar according to De-rating factor.

Project & Design Engineer

Lantec Technologies
02.2014 - 07.2018
  • Study the Design Input Documents (DID) & RFQs (Request for Quotations) provided by Customers to develop customized solutions to fulfill the Customer’s requirements.
  • Costing & Estimation of Panel as per the GA drawings and Bill of Material.
  • Preparation of Electrical Scope, Bill of Material & Scope of Supply for Projects.
  • Preparation of Schematics, SLD, General Assembly & Internal General Assembly by using AUTO CAD software.
  • Designing of Electrical panels like Power Control Center (PCC), Motor Control Center (MCC), Auto Power Factor Control (APFC), Auto Main failure (AMF), Synchronizing panel, Control Relay Panel (CRP), Fire Hydrant Panel, VFD Panels, LDB, PLC/DCS/HMI Automation panels & Medium Voltage Panels up to 33KV as per the client’s requirement.
  • Design verification for control gear assemblies in compliance with the standard of IEC- 61439, IEC- 60947 & UL 508A standard for safety for industrial control equipment.
  • Sizing and Selection of various switchgear components (Siemens, L&T, ABB & Schneider switchgears) for Electrical Control Panel in compliance with the Type 2 coordination.
  • Testing of the panel as per the Engineering Design.
  • Providing technical support to Customers & Service Engineers for site installations
  • Preparing the FAT, Test report, quality checking and approval for the release of the manufactured panel
  • Activities will be completed according to the implemented Safety/Quality assurance Plan (QAP)

Assistant. Electrical Engineer

Jbf Industries Ltd
02.2012 - 01.2014
  • Managed maintenance of electrical systems for continuous polyester yarn production.
  • Performed troubleshooting, preventive, and breakdown maintenance to minimize downtime.
  • Conducted root cause analysis and failure diagnostics to enhance plant performance.
  • Led energy audits to optimize efficiency and implement conservation strategies.
  • Prepared daily energy consumption reports and performed industrial audits on electrical systems.

Electrical Site Engineer

Power Links Engineering Company
06.2009 - 06.2011
  • Designed and implemented electrical systems for commercial and residential projects.
  • Coordinated with departments to integrate electrical elements and prepare specifications and blueprints.
  • Managed teams of electrical contractors and subcontractors, ensuring projects adhered to timelines and budgets.
  • Estimated material needs and ensured compliance with performance and project deadlines.
  • Supervised electrical cable and tray installations in residential and commercial settings.

Education

MBA - Operations Management

Dr. D.Y. Patil Vidyapeeth

B. Tech - Electrical & Electronics

A.S.I.E.T Kerala
01.2009

12th - undefined

Kerala State Board
01.2005

10th - undefined

Kerala State Board
01.2003

Skills

  • Data Center Management
  • Facility Management
  • Energy Management
  • Operation & Maintenance
  • Physical Security Audit
  • Auto CAD
  • Manpower Management
  • Customer Handling
  • Process Improvement
  • Electrical Maintenance
  • Compliance Audit
  • EPLAN
  • Vendor Management
  • Project Coordination
  • Project Execution
  • Testing & Commissioning
  • Customer Audit
  • SAP
  • Team Leadership
  • Time Management
  • Customer Supports
  • MS-Office
  • ETAP Software

Certification

  • Completed 5 Days ISO20K & ISO27K Internal Auditor training program, Bangalore.
  • Completed 5 Days of IOSH training by Institute of Occupational Safety and Health, Pune.
  • Completed 3 Days Advance Excel training, Navi Mumbai
  • Completed 1 week classroom ETAP tool training by ETAP Automation Pvt. Ltd, Navi Mumbai

Languages

English
Hindi
Malayalam

Timeline

Assistant Shift Manger

ST Telemedia Global Data Centres Pvt Ltd
08.2021 - Current

Senior Electrical Design Engineer

L&T Technology Services
08.2018 - 06.2021

Project & Design Engineer

Lantec Technologies
02.2014 - 07.2018

Assistant. Electrical Engineer

Jbf Industries Ltd
02.2012 - 01.2014

Electrical Site Engineer

Power Links Engineering Company
06.2009 - 06.2011

B. Tech - Electrical & Electronics

A.S.I.E.T Kerala

12th - undefined

Kerala State Board

10th - undefined

Kerala State Board

MBA - Operations Management

Dr. D.Y. Patil Vidyapeeth

Similar Profiles

CREATE PROFILE
Binny Varkey