CHARLES PANNEERSELVAM

• Responsible for Electrical cable , Instrument IS AND non IS CABLE , CONTROL CABLE Laying for various cable trays, and trenches,

• Responsible for 50mm to 600 mm GI and stainless cable trays fabrication and installation for pipe rack structure and shelters,

• Supervising for cable glanding Termination for Required location, following as per Drawings,

• Up to 300 sq mm Earthing cable and up to 50X 20 mm size of Earthing strip laying for following Earthing Layout drawing,

• Responsible for the Electrical and Instrument installation of cable conduits, cable trays, Earthing protection lighting system installation,

• ICSS vendor supporting for Pre- Commissioning and commissioning ,

Installation for F&G Related Smoke Detector,flame detector, Heat Detector,

• Supervising for Electrical ,Instrumentation cables and control cable’s laying for following layout drawing and cable schedule

• Witness/conduct continuity insulation test on low voltage, medium voltage cables and High voltage cables, before and after pulling,

• Power DB's, Lighting DB's, Lighting and power JB's, Welding sockets, convenience sockets installation,

• Supervising for LEVEL TRANSMETER, PRESURE TRANSMETER, TEMPRATURE TRANSMETER Installation,

• HONEYWELL XNX model gas detector installation, calibration and, troubleshooting,

• Solenoid valve Maintenance and Trouble shooting for during Warranty period,

• MAMBEY Mooring System troubleshooting for during warranty period,

• Provided technical supervision and support to Instrumentation and Electrical (I&E) supervisors, Instrument and electrical planners and contract personnel.
• Obtained proper permits to carry out electrical work on facility and construction projects.
• Enforced safety regulations and penalized workers for not following work safety agreements.
• Reviewed and monitored cost and man-hour budget for installation process to develop staff facilities, equipment and tool requirement plan.
• Delegated duties to employees based on skillset.
• Established and enforced procedures and work standards, promoting team performance and safety.
• Monitored project progress to enforce adherence to deadlines and quality standards.
• • 11KV /440 v oil type transformer installation follow the Approved Layout Drawings and installation Drawings,
• 11 kV/3.3 kV OIL TYPE TRANSFOREMER Installation follow approved layout Drawing and installation Related Drawing,
• Transformer HV and LV single core and multi core cable glanding and Termination,
• Responsible for 3.3 kV motor cable glanding, termination before complete IR test and motor rotation test
• Capacitor bank installation for as per following drawing,Supervising for HV panel , MCC PANEL, LV panel , EMCC panel , LV ,HV BUSDUCT & Marshaling panel Installation for inside substation following Electrical Equipment layout Drawing and related drawing,
• Supervising for Cathodic protection Transformer, Test box, sacrificial anode and magnesium anode installation for following as per side Requirement,
• Supervising for Lighting and JB support fabrication and welding for following Drawing and modification as per site condition,
• Supervising for STREET LIGHTING ,FENCE LIGHTING, FLOOD LIGHTING POLES, STRUCTURE MOUND LIGHTING,SHELTER LIGHTING installation,
• Power DB's, Lighting DB's, Lighting and power JB's, Welding sockets, convenience sockets installation for following Approved Drawings,
• Responsible for Up to 300 sq mm Electrical power cable and control cable Laying for cable trench , cable trays,
• Responsible for Cable trays fabrication and installation following as per layout Drawing,
• Supervising for Electrical and instrumentation Earthing cable up to 400 sq mm insulated and non insulated cable laying exothermic welding as per following Earthing Layout Drawing ,

• Incharge for complete substation Electrical and Instrument construction activities,

• 11KV /440 v and 11kv/ 3.3 kV oil type transformer installation follow the Approved Layout Drawings and installation Drawings

• Transformer HV and LV single core and multi core cable glanding and Termination,

• 0.44/0.433 kV try type transformer installation for inside of substation,

• Installation of HT setup oil type transformers, LT LIGHTING TRY TYPE TRANSFORMER,VSD, HV ,MV panels control MCC& EMCC ,VSD , panels, LV HV BUSDUCT,DIESEL GENARATOR LOAD BANK,EGCP Panels ,ESCADA Panel,

• Supervising for GLANDING TERMINATION for HV, LVCONTROLCABLES for as per following documents,

• Installation of Earth Pit rod and Earthing bus bar,

• Supervising for Electrical and instrumentation Earthing cable up to 400 sq mm insulated and non insulated cable laying exothermic welding as per following Earthing Layout Drawing ,

• Supervising for Cable laying for HV, LV cables in Underground and Cable trays as per following cable schedule, layout diagram, section drawing,

• Provided troubleshooting and analysis for discovered electrical faults, offering potential solutions.
• Performed electrical design analyses and tests for proposed systems and devices.
• Conducted tests on electrical systems and equipment and reported results.
• Performed equipment and product maintenance and inspected systems to locate potential malfunctions.
• Install circuit breakers, switches, and outlets, light fixtures, electronic equipment and Communication Systems.
• Assemble, install, and wire the electrical systems in new homes, residential and commercial buildings.
• Cut, thread, Bend, assemble and install conduit, electrical conductor enclosures, and fittings. Follow blueprints and wiring diagrams,
• Installation of HV and LV panel’s, DB’s,
• LV, HV cables continuity and IR test,
• Install circuit breakers, switches, and outlets, light fixtures,
• Managed the repair and replacement of damaged electrical components/assemblies.
• Respond to customer service and complaints and working with homeowner solving problems at their residences. Working with other trades/builders to solve homeowner issues.

• Assembled electrical systems or prototypes using hand tools or measuring instruments.
• Tested circuitry and electronic components according to engineering instructions, technical manuals or knowledge of electronics.
• Performed diagnostics and testing to locate root causes and resolve issues for optimal performance.
• Frequently worked overtime, weekends and holidays.
• Installed electrical wiring during remodeling projects.•
• Electrical and Instrument Cable Laying,
• Installation of lighting dB’s, Power DB’s ,industrial socket outlets and lighting fixtures,
• Installation of LV and HV panel installation,
• Installation testing and commissioning of electrical power, Internal lighting and External lighting,
• LV, HV and control cables continuity and IR test,
• Participate in Pre-commissioning and commissioning activities,
• All lighting JB Installation , Glanding and Termination,
• Instrument JBs cable dressing, glanding and Termination,
• Cable Ladder Tray making of 45 and 90 degree and horizontal and vertical laying.
• Street light pole installation,
• Motor and MOV termination

• Installation of HT setup transformers, control MCC panels load take off panels, VCB panels, cables laying cable GLANDING and TERMINATION,

• During troubleshooting quickly fault trace out by the electrical drawing,

• Execution of HV,LV system installation , testing and commissioning of LV panels MDBs & SMDBs LDBs consultant requirements complying with local authority standards and project specification,

• Installation testing and commissioning of electrical power, Internal lighting and External lighting ,lighting control and dimming control system,

• Maintenance of all electrical equipment like motor star delta starter,

• Motor installation including switchgear design, assembling, and installation.

• Maintenance of low, medium and high voltage processes involving single and multiphase wiring.

• Monitor manpower at a site of electrical sub-contractor makes it sure that all possible activity area,

• Schedule the work activities of manpower, with due consideration of stock materials on hand, current and projected materials equipment and manpower availability.

• Conduct installation of cable Trunking, containment, cable tray, small power and lighting systems

• Conduct installation of cable raceway such as; ladder/perforated trays, conduits fittings for lv and mv cables,

• Rewire, problem diagnosis and troubleshooting of existing electrical systems.

• Monitoring and checking all materials delivery at site, outstanding materials

• Accounts (Sub contractor bill Budget Detail )

• Preparation Of Rate Analysis,

• Repair or replace wiring, equipment, and fixtures, using hand tools and power tools

• Motor installation including switch gear design, assembling, and installation,

• Assemble, install, and wire the electrical systems in new homes, residential and commercial buildings.

• Cut, thread, Bend, assemble and install conduit, electrical conductor enclosures, and fittings. Follow blueprints and wiring diagrams

• Installation of HV and LV panels, DB’s,

• 11kV/440 v ,500 kVA oil type transformer installation with double pole structure Erection,

• 50kVA Diesel generator installation and commissioning,

• Install circuit breakers, switches, and outlets, light fixtures, electronic equipment, and Communication Systems.