DANISH EKRAM
Jamshedpur
Summary
Instrumentation and Control Engineer with 15 years’ experience on Greenfield and Brownfield projects predominately in the Oil & Gas and Petrochemical industry. Experience extends across many phases of the project life cycle including construction, pre-commissioning, commissioning, start-up and Handover. Computer literate, energetic, worked in multi culture environments.
Overview
18
18
years of professional experience
Work History
Instrument Engineer – Commissioning & Start-up
SPIE OIL & GAS, ADNOC GAS PROCESSING
Habshan
09.2020 - 11.2024
- Leading multinational commissioning Team for Loop check, Dynamic Test, Cause & effect Test, Punch List closure, “ITR-B” Check Sheets closure, assist FAT and SAT
- Monitoring construction ITR-A and punch list progress, reply to construction TQ’s, raise Verify CONTRATORS Installation, calibration, testing, ITP completion and punch list clearance
- Preparing commissioning dossier, loop packages, MC Walkdown, Punch list, daily and weekly meeting Wrote commissioning procedure for F&G and Process field instrumentation
- Execute commissioning activities according to Commissioning procedures
- Provide Technical input and approval for Commissioning Test Procedures, Provide Technical input to Site queries and review of all Instrument changes
- Cooperate and support the CSU Operations team in the execution of Commissioning & Start-up activities
- Co-ordinate with engineering, construction, commissioning team, vendor, completions team
- Defining LOSH, Assigning QVD-B Completions check sheets for Instrument, HVAC, F&G instrument tags Follow the execution of Instrument commissioning activities to achieve commissioning schedule completion target
- Creating maintenance procedure
- Implementation of preventive maintenance programs Providing leadership for the safety, accident prevention, and fire prevention programs on the project
Instrumentation Engineer – Commissioning
SCHLUMBERGER
Kuwait
01.2018 - 12.2019
- Acquires and understands the Project goals from Contract, specific documentation and the kick-off meeting
- Involved in commissioning & start-up of sub-station’s Fire & Gas and HVAC testing (Dumpers, actuators etc)
- In co-ordination with operations carried out Pre-commissioning and commissioning of Utility, HP/LP Fuel gas, Deluge testing, Process Trains, Flare, off spec tanks, Turbine and compressors serial link tests, HP/LP compressors, Sub-stations, CO2 systems
- Carried out Site Acceptance Test of Emerson DeltaV and SIS
- Monitoring construction ITR-A and punch list progress, reply to construction TQ’s, raise Participate in MC tri-party walk down, Co-ordinate Punch list clearance and sign off RFC
- Leading multinational commissioning Team for Loop check, Dynamic Test, Cause & effect Test, Punch List closure
- Control of MOC’s, RLMU, As-built, O&M manuals, vendor documents etc
- Provides technical support to Project group and “ITR-B” Check Sheets closure
- Reports to the Project staff and to the Client whenever required
- Prepares the feedback dossier
- Providing leadership for the safety, accident prevention, and fire prevention programs on the project
Instrument commissioning and startup Engineer
SEIMENS
Abu-Dhabi
01.2017 - 12.2017
- Execution of OTPs (Operational test procedures, SATs of control systems, C&E testing, instrument calibration, F&G system testing, punch list clearance and smooth handover to client
- Yokogawa Engineering and Fabrication yard and completed FAT and SAT of PCS, ESD and DCS control systems including complete testing of ICSS with third party sub-systems via hardware and software links
- Leading supervisor for daily works completion on site such as installation, maintenance, troubleshooting, repair and testing of a wide range of electrical, electronics, pneumatic, and microprocessor based analytical instruments and process analyser, lab analysers, instrument equipment and associated control systems, protection with associated programming logic control (PLC) with ESD system, Fire & gas system, telecommunication system.
Instrument Engineer – Construction/Commissioning
Weatherford Oil Tools
Basra
04.2014 - 10.2016
- Tri Party Mechanical completions walk down, Develop instrument commissioning philosophy, Implementation of commissioning procedure, review construction ITR-A and Punch list closure, turnover package review
- Assist in FAT and SAT
- Systems completion progress and close-out reports
- Involved in commissioning & startup of sub-station’s Fire & Gas and HVAC testing (Dumpers, actuators etc) In co-ordination with operations carried out Pre-commissioning and commissioning of Utility, HP/LP Fuel gas, Deluge testing, Process Trains, Flare, off spec tanks, Turbine and compressors serial link tests, HP/LP compressors, Sub-stations, CO2 systems
- Carried out Site Acceptance Test of Emerson Delta-V and SIS
- Monitoring construction ITR-A and punch list progress, reply to construction TQ’s, raise Participate in MC tri-party walk down, Co-ordinate Punch list clearance and sign off RFC
- Leading multinational commissioning Team for Loop check, Dynamic Test, Cause & effect Test, Punch List closure, “ITR-B” Check Sheets closure
- Control of MOC’s, RLMU, As-built, O&M manuals, vendor documents etc.
Instrument Commissioning Engineer
GASCO – Moody Intertek
Al-Asaab
10.2012 - 12.2013
- Execute commissioning activities according to Commissioning procedures
- Provide Technical input and approval for Commissioning Test Procedures, Provide Technical input to Site queries and review of all Instrument changes
- Verify & Approve Commissioning Dossier reviews (MC/PC Completion status, Commissioning Test Procedure, ITR’s, Ex-items, MOC’s, Exception reports, outstanding works, Punch lists etc.), Witness and approve Loop check, F&G test, Deluge Tests
- Raise Permit to Work and prepare JSA and Risk Assessment
- Area MC Walk down for Process Instruments, F&G, HVAC, Deluge Systems, Control System Cabinets etc
- Dynamic testing well head controls, production manifolds, flash gas compressors, gas dehydration Verify CONTRATORS Installation, calibration, testing, ITP completion and punch list clearance
- Cooperate and support the CSU Operations team in the execution of Commissioning & Start-up activities.
Instrument Engineer
Samsung Engineering
Oman
11.2010 - 03.2012
- Leading a team of 12 technicians and couple of supervisors in Main responsibility was to drive Pre-commissioning team of technicians to perform Installation and loop checks of Process Field Instruments like Temperature, level, flow and pressure transmitters, Analyzers, control valves, Emergency shutdown valves, MOV’s etc
- Supervise technicians to carried out Calibration, Installation and Testing of fire & gas Instruments like Flammable Gas Detectors, Hydrogen Gas detector, Oxygen Deficiency Detector, Toxic Gas Detector, CO2 Gas Detector, Rate of Rise Heat Detector, Smoke Detector, High Sensitivity Smoke Detector, Aspirator HVAC Duct Probe, Visual Alarm Beacon etc
- Issue material requisitions to the Procurement Department for enquiry, order placement and for any subsequent revisions Provide troubleshooting assistance Assist in FAT and SAT
- Participate in MC tri-party walk down, Co-ordinate Punch list clearance and sign off RFC.
Instrument Supervisor
Dodal
Qatar
04.2008 - 02.2010
- Plan, co-ordinate and execute construction and pre com activities – instrumentation, telecom, HVAC, trace heating, earthling, lighting
- Leading group of technicians and coordinating in installations, calibration and pre commissioning
- Assist the designers with the preparation of cable block diagrams, cable routing, equipment layouts, termination drawings and schedules
- Review all C&I drawings and ensure that the quality of design and drawings produced for enquiry and fabrication purposes is of satisfactory standard
- Prepare technical bid analysis for C&I equipment
- Attend coordination meetings and engineering review meetings with supplier as required
- Review document requirements and issue dates for major equipment with suppliers and assist Procurement Department in compiling a Supplier's Document Index
- Assist Procurement Department with the expediting of supplier documents.
Instrument Trainee Engineer
BOC India Ltd (LINDE GROUP)
Jamshedpur
07.2006 - 06.2007
- Supervising the installation, maintenance, troubleshooting, repair and testing of a wide range of electric, electronics, pneumatic and microprocessor based analytical instruments and process analyzers; lab analyzers, instrument equipment and associated control systems, protections with associated Programming Logic Control (PLC) with ESD Systems, fire & gas systems, telecommunication system, Burner Management System (BMS).
Education
3 YEARS ENGINEERING DIPLOMA - Instrumentation & Control Engineering
Al-KABIR POLYTECHNIC
JAMSHEDPUR11-2005
Skills
- SAP FIORY
- PTW
- WMS
- Boilers
- Turbine
- Chemical Storage
- Chemical Unloading
- Waste Water Treatment Plant
- Pipeline
- Well Heads
- Sulphur recovery and storage
- Power Plant
- Sour Gas Injection Plant
- Emergency Shutdown Systems
- Process Control
- F&G
- HVAC instrumentation
- Telecomm
- Loop Checks
- Function Tests
- C&E Tests
- Level and Flow measurements
- ICSS FAT
- SAT testing
- Drawings
- Hook up
- P&ID
- Control Room Layouts
- Cable Schedules
- I/O Allocations
- C&E metrics
- Block diagram
- Location Drawings
- Loop Drawings
- Hardware
- Software
Hse Responsibilities
- Demonstrate a positive and pro-active commitment to HSE through the personal application of safety critical behaviors;
- Applying Project HSE Policies & Management System Requirements;
- Supporting/ Participating in Emergency Drills and Exercises as required;
- Reporting all Accidents/ Incidents and Unsafe Acts/ Conditions in a timely manner.
Trainings And Courses
- PERMIT TO WORK (WRAP AND TRIC) SAP.
- H2S COURSE LEVEL 2
- SOUR GAS INDUCTION (GOING LIVE) TRAINING
- SWEET GAS INDUCTION TRAINING
- WORKING ON HEIGHT
- CONFINED SPACE
- ELECTRICAL LIGHT VOLTAGE LEVEL I, II AND LEVEL III
Passport Detail
Z3659593, 09/29/2026, Ranchi-India
Personal Detail
01/01/1987, Instrumentation & Control engineer, Married, Indian, Jamshedpur, India, Ranchi – India, English
Competencies And Skills
- Experience in SAP ‘FIORY’, PTW and WMS.
- Experience in Boilers, Turbine, Chemical Storage, Chemical Unloading, Waste Water Treatment Plant, Pipeline, Well Heads, Sulphur recovery and storage, Power Plant and Sour Gas Injection Plant.
- Experience in Emergency Shutdown Systems, Process Control, F&G, HVAC instrumentation and Telecomm.
- Experience in Loop Checks, Function Tests and C&E Tests, Level and Flow measurements etc.
- Experience in ICSS FAT and SAT testing.
- Experience in drawings; Hook up, P&ID, Control Room Layouts, Cable Schedules, I/O Allocations, C&E metrics, Block diagram, Location Drawings, Loop Drawings etc.
- Experience in Hardware and Software of Control Systems.
- Experience in Control Systems like PLC, DCS, SCADA, BMS and HMI Systems.
- Experience in commissioning plan, Procedures, Spares, temporaries etc.
- Experience in Yokogawa Centum CS 3000, Delta V, Honeywell TDC 3000, TRICONEX, ICS Triplex and Siemens Control Systems.
Timeline
Instrument Engineer – Commissioning & Start-up
SPIE OIL & GAS, ADNOC GAS PROCESSING
09.2020 - 11.2024
Instrumentation Engineer – Commissioning
SCHLUMBERGER
01.2018 - 12.2019
Instrument commissioning and startup Engineer
SEIMENS
01.2017 - 12.2017
Instrument Engineer – Construction/Commissioning
Weatherford Oil Tools
04.2014 - 10.2016
Instrument Commissioning Engineer
GASCO – Moody Intertek
10.2012 - 12.2013
Instrument Engineer
Samsung Engineering
11.2010 - 03.2012
Instrument Supervisor
Dodal
04.2008 - 02.2010
Instrument Trainee Engineer
BOC India Ltd (LINDE GROUP)
07.2006 - 06.2007
3 YEARS ENGINEERING DIPLOMA - Instrumentation & Control Engineering
Al-KABIR POLYTECHNIC
Similar Profiles
GOVIND MOHANAN PILLAIGOVIND MOHANAN PILLAI
Inspection engineer at ADNOC GAS, HABSHAN-5, M/S. AL MASAOOD OIL AND GASInspection engineer at ADNOC GAS, HABSHAN-5, M/S. AL MASAOOD OIL AND GAS
Muhammad AmirMuhammad Amir
Electrical Technician at Spie Oil and gas ServicesElectrical Technician at Spie Oil and gas Services
JOY LANDICHOJOY LANDICHO
Electric & Instrument Technician at SPIE Oil & GasElectric & Instrument Technician at SPIE Oil & Gas