Dhavamani Munusamy

Project Description:

• High Speed 2 (HS2) is a planned high-speed rail network in the United Kingdom.
• One of the Stations was located on Curzon Street.
• This project already completed the Scheme design Stage 3.

Role Description:

• Responsible for Re-modeling and update stage 4.
• Preparation for sheets and annotation using Open Buildings Designer Connect Edition Update 7 and ensuring all files such as level classification library, design file systems (seed file and units of work) pass HS2 CAD QA., position names, design model content and preparation of documentation package to push model and drawings for workflow as per BIM execution plan.

Project Description:

• Provision of a new Platform 5 at Oxford Station, converting Platform 4 to a twin-faced island platform to accommodate the fifth new track.
• This will include new canopy and platform buildings for staff and customer facilities.
• A new western entrance building and associated fit-out, linked to the platform via a subway, stairs and a lift is to be built.

Role Description:

• Responsible for creating modelling and sheet annotation for Platforms 4&5 and Western Entrance using Open Buildings Designer Connect Edition Update 7 and ensuring all files such as level classification library, design file systems (seed file and units of work) pass WAW CAD QA., position names, design model content and preparation of documentation package to push model and drawings for workflow as per BIM execution plan.

Project Description:

• High Speed 2 (HS2) is a planned high-speed rail network in the United Kingdom.
• OOC HS2 Station Central Box is proposed to be built by HS2 to produce an intermediate-level beam.

Role Description:

• Responsible for creating proposed intermediate-level beam using Revit and Navis management.
• Creating new 3D models & 3D detailing as per BIM requirements and creating phase-by-phase construction sequences.

Project Description:

• Model and RC intend to propose to build the product.

Role Description:

• Responsible for proposed model superstructure levels using Revit software references and creating a model as per BIM requirements and workflow in BIM 360.

Project Description: Model and RC intend to propose to build the product.

Role Description: Responsible for proposed model superstructure levels using Revit software references and creating a model as per BIM requirements and workflow in BIM 360.

Project Description:

• Killingholme 400kV Substation the purpose of creating a 3D model and 3D detailing is a substation building.

Role Description:

• Responsible for Proposed Modelling Substation and Modelling Reinforcement Concrete Details Using Revit and Navis Managing software specifications and creating a model as per BIM requirements.
• Preparation of NWC/IFC patterns for internal and external collaboration and federation models for conflict detection for Concrete, MEP and Rebar.

Project Description:

• Oxted Gasworks has a total of 3 blocks (Blocks A, B & C) in this project.
• The project was a commercial building.

Role Description:

• Responsible for preparing 3D reinforced concrete detail drawings with bar bending schedule as per project standards and checking drawings and BBS using Revit and Cads RC software.

Project Description:

• 71-72 The Kingsway Swansea This project was a residential project.

Role Description:

• Responsible for reinforcing concrete detailing shop drawings of the pile cap, ground beams, slab (B2 to level 07 roof), core wall and columns with bar bending table as per project standards and checking drawings using AutoCAD and Cads RC software.
• I coordinate with internal and external resources, and I must site queries and respond to RFI-related emails.
• My main work is required in cost control, change controls, document record etc.
• Attending weekly client meetings to show progress details.

Project Description:

• Residential high-rise building structures for Block B (floor 22 roof), A (floor 27 roofs) & F (floor 19 roofs) are to be worked on.

Role Description:

• Responsible for preparing reinforcement concrete detail drawings with bar bending schedule as per project standards and checking drawings and BBS using Cads RC software.
• I coordinate with internal and external resources, and I must field queries and respond to RFI-related emails, and need to prepare cost control, change controls, document recording etc.
• Attending weekly client meetings to show progress details.

Project Description:

• 60 Curzon Street is a top-down construction method and uses a lot of temporary and permanent steel columns and beams.
• The framing contractor and client both require below Ground level and follow 6m stock length and all permanent steel columns follow welding couplers.

Role Description:

• Responsible for preparing 2D & 3D reinforced concrete detail drawings with bar bending schedule as per project standards and checking drawings and BBS using Cads RC software.
• I coordinate with internal and external resources, and I must field queries and respond to RFI-related emails.
• I need to prepare the cost control, change controls, document recording etc. Attending weekly client meetings to show progress details.
• The project is a top-down construction method from Level 00 to Basement B3 and the level above is a post-tensioned layer.
• This building is one of the most complex residential buildings.

Project Description:

• Baltimore wharf phase III This project is coordinated with an existing foundation and coordinates with an existing structure.

Role Description:

• Responsible for preparing reinforcement concrete detail drawings with bar bending schedule as per project standards and checking drawings and BBS using Cads RC software.
• I coordinate with internal and external resources, and I must field queries and respond to RFI-related emails, and need to prepare cost control, change controls, document recording etc.
• Attending weekly client meetings to show progress details.

Project Description:

• This project is a 73-Story commercial building. Our proposal is to prepare a shop drawing and bar bending schedule.

Role Description:

• Responsible for preparing reinforced concrete detail drawings with bar bending table as per project standards and checking drawings and BBS using AutoCAD 2013 and LP (Lennerts & Partner) system production software following British Standards for UAE projects (BS 8666:2005).
• Create and submit an accurate bar list for fiction and placement. Verify fabrication sheets and submit batch lists/change orders as required.
• Report any discrepancies between estimated weight and detailed weight to the immediate supervisor.
• Preparation of bar bending table for the fabrication shop.
• Maintained track record to issue customer-approved schedules for production.

Project Description:

• Al Naboodah interchange is the Bridge construction.
• This is one of the Dubai Road projects.

Role Description:

• Responsible for preparing Bridge construction (abutment and Beam bridge) reinforced concrete detail drawings with bar bending table as per project standards and checking drawings and BBS using AutoCAD 2013 and LP (Lennerts & Partner) system production software following British Standards for UAE projects (BS 8666:2005).
• Create and submit an accurate bar list for fiction and placement. Verify fabrication sheets and submit batch lists/change orders as required.
• Report any discrepancies between estimated weight and detailed weight to the immediate supervisor.
• Preparation of bar bending table for the fabrication shop.
• Maintained track record to issue customer-approved schedules for production.

Project Description:

• Airport Midfield Terminal Complex project is one of the biggest airports in Abu Dhabi.
• Our proposal is to prepare shop drawings and bar bending schedules for Tunnel T1 & T2.

Role Description:

• Responsible for preparing reinforced concrete detail drawings with bar bending table as per project standards and checking drawings and BBS using AutoCAD 2013 and LP (Lennerts & Partner) system production software following British Standards for UAE projects (BS 8666:2005).
• Create and submit an accurate bar list for fiction and placement. Verify fabrication sheets and submit batch lists/change orders as required.
• Report any discrepancies between estimated weight and detailed weight to the immediate supervisor.
• Preparation of bar bending table for the fabrication shop.
• Maintained track record to issue customer-approved schedules for production.

Project Description:

• Our proposal is to prepare shop drawings and bar bending schedules.

Role Description:

• Responsible for preparing reinforced concrete detail drawings with bar bending table as per project standards and checking drawings and BBS using AutoCAD 2013 and LP (Lennerts & Partner) system production software following British Standards for UAE projects (BS 8666:2005).
• Create and submit an accurate bar list for fiction and placement. Verify fabrication sheets and submit batch lists/change orders as required.
• Report any discrepancies between estimated weight and detailed weight to the immediate supervisor.
• Preparation of bar bending table for the fabrication shop.
• Maintained track record to issue customer-approved schedules for production.

Project Description:

• Our proposal is to prepare shop drawings and bar bending schedules.

Role Description:

• Responsible for preparation of reinforcement concrete detail drawings with bar bending table as per project standards and checking drawings and BBS using Auto CAD 2004 and Steel PAC software following British Standards (BS 8666:2005) for UAE projects.

Project Description:

• Our proposal is to prepare shop drawings and bar bending schedules.

Role Description:

• Responsible for preparation of reinforcement concrete detail drawings with bar bending table as per project standards and checking drawings and BBS using Auto CAD 2004 and Steel PAC software following British Standards (BS 8666:2005) for UAE projects.

Project Description:

• Our proposal is to prepare shop drawings and bar bending schedules.

Role Description:

• Responsible for preparation of reinforcement concrete detail drawings with bar bending table as per project standards and checking drawings and BBS using Auto CAD 2004 and Steel PAC software following British Standards (BS 8666:2005) for UAE projects.

• Responsible for preparation of reinforcement concrete detail drawings with bar bending table as per project standards and checking drawings and BBS using Auto CAD 2004 and Rebar cad software following Canada standards.