AutoCad
DINESH KUMAR GUPTA
Mechanical & Production Engineer
Maharajganj,Uttar Pradesh
Summary
- Talented Drafter offering 4 years' experience in Structural design, construction, Oil and Water Storage Tanks, Bridge, and all new product according to need of customers. Understanding of relevant codes, construction techniques, and best practices.
- Knowledgeable Drafter proficient in building and leading exceptional teams. Searching new opportunity to apply my skill with fast-growing organization.
- Talented Drafter with solid computer-aided design skills and familiarity with multiple industries. Generated accurate representations of buildings, systems and components to meet client parameters. High-level technical skills and attention to detail enabled impressive results.
- Skilled Production Manager versed in schedule, inventory and team management. Versed in quality assurance, purchasing and administration of production operations. Offers 4 years of progressive experience in manufacturing and production environments.
- Dynamic Production & Mechanical Engineer with experience supervising production lines, overseeing materials inspection, scheduling production and conducting weekly physical inventories. Works with planners, inventory specialists and line supervisors to streamline workflow and meet aggressive deadlines.
- Ingenious Site Engineer successfully implementing project cost procedures and monitor quality construction. Skilled at reading blueprints and communicating duties to workers. Proficient in methods, principles and applications of engineering, design, building and construction.
- Veteran Quality Control Engineer with 4 years serving as final arbiter of product quality and continuity. Takes ownership of production quality through all phases of development and manufacture. Proponent of combining direct oversight with meticulous documentation and training to produce optimal development and manufacturing results.
Overview
4
4
years of professional experience
4
4
Years of Bachelor of Technology Degree
3
3
Certificates
3
3
Languages
1
1
Research Paper
1
1
Industrial Training
Work History
Assistant Design and Drafting Engineer
ATC GUINEA
Conakry, Guinea
06.2017 - 03.2021
- Supported engineering design development through analysis and simulation of prototypes and 3D computer models.
- Processed customer-supplied requirements into actionable design plans through critical thinking and independent research.
- Created parts for machining, sheet metal fabrication and injection molding.
- Estimated quantities and cost of materials, equipment and labor to determine project feasibility.
- Provided technical engineering support and project management for design, engineering and development of new products.
- Created CAD drawings using AutoCAD to convey manufacturing and production configurations.
- Interacted with project leaders and stakeholders to define requirements and generate and maintain design development documents.
- Collaborated with clients, architects, engineers, contractors and sub-consultants on projects with budgets..
- Consulted with architects, customers and vendors regarding project scope and milestone dates.
- Reviewed specifications to generate complex details of individual system components.
- Calculated mathematical formulae to develop and design detailed specifications for components and machinery with computer assistance.
- Developed CAD drawings from hand sketches, verbal instructions and site visits.
- Created CAD models and drawings for Shop and fabrication.
- Trained junior employees on AutoCAD, SolidWorks and company design standards.
- Created designs and blueprints using AutoCAD and SolidWorks according to customer specifications, timelines and supply inventories.
- Evaluated information provided by architects and system subcontractors and created accurate drawings according to measurements and specifications.
- Managed drafting and design for over 100 projects from concept through delivery.
- Trained junior staff on codes, best practices and suppliers, which enabled better self-sufficiency and task completion.
- Collaborated with design and engineering staffs to solve AutoCAD and SolidWorks related issues.
- Used computer-aided design software to prepare blueprints and schematics.
- Supported value engineering and architectural review processes.
- Applied knowledge of Design Standard codes to drafting projects.
- Oversaw 4 drafting teams completing simultaneous projects, successfully meeting key milestones.
- Worked with architects, engineers and customers to efficiently resolve planning and construction issues.
- Organized web-based storage sites and collaboration project sites using ProjectWise or cloud storage to share drawings with project and subcontractors.
- Calculated dimensions and allowances with accurate precision for project specifications.
- Modified designs to correct operating deficiencies and reduce production problems.
- Collaborated with engineering and architecture staff to determine safe, sturdy construction methods.
- Consulted with project managers, design consultants and sub-contractors to produce and alter drawings.
- Designed arrangements for Structural architecture using AutoCAD
- Supported project team in design process to update details of each project.
- Interpreted technical drawings, schematics and computer-generated reports to make revisions to CAD drawings.
- Identified potential operational issues and redesigned products to improve functionality.
- Analyzed component and system details to resolve design problems.
- Tracked team work hours and submitted documentation.
- Interpreted over 50 architectural and engineering sketches to create detailed blueprints for construction projects using AutoCAD
Production Engineer/Manager
ATC GUINEA
Conakry, Guinea
01.2018 - 03.2021
- ATC Guinea is specialized construction company in supply, fabrication, and installation of steel structure works.
- Our Major work is the fabrication of structural building for the ware house, Oil & Water storage tank, Pedestrian bridge, and all steel products as per the requirement of customers.
- Assessed manufacturing processes and recommended improvements to increase productivity.
- Directed manufacturing process and procedures to achieve goal of first run capability.
- Determined suitable crew requirements, scheduled employees and worked with Human Resources to meet changing production schedules.
- Addressed personnel issues and scheduling conflicts promptly.
- Oversaw bin fulfillment services, manufacturing and case picking for supply chain orders with rapid turnaround for high-quality and fresh product delivery.
- Sourced materials to keep up with production goals and meet customer demands.
- Applied lean practices to balance workflow and eliminate unnecessary steps.
- Implemented quality improvement changes to minimize product defect rates.
- Resolved issues quickly to maintain productivity goals.
- Created streamlined production schedules and collaborated with production employees to communicate objectives and goals.
- Calculated finances and production costs while managing cash flow.
- Reviewed work for quality and compliance with company standards and design specifications.
- Created and regularly updated department work instructions and reports.
- Managed continuous improvement initiatives to drive gains in quality, flow and output.
- Directed key personnel in correct production techniques to achieve required quality.
- Completed and submitted monthly and yearly reports to support executive decision making.
- Developed and implemented cost controls and other expense reduction measures.
- Decreased defect rate by 99% by applying process capability analysis and creating weekly defect reports
- Maximized productivity by 99% by developing and implementing innovative production processes for new and existing products
Quality Engineer
ATC GUINEA
Conakry, Guinea
03.2018 - 09.2018
- Performed quality control audits on pre-production supply chain, verifying continuity of raw materials.
- Reviewed and validated quality requirements for manufacturing planning, supplier purchase orders and engineering specifications to meet contract compliance regulations.
- Integrated diagnostic automation to accelerate and sharpen post-production testing.
- Expanded risk management measures through spot-checking and increased randomization of inspections.
- Utilized calibration software to detect and adjust variances in customer-facing products within prescribed tolerances.
- Determined root cause of deviations and non-conforming results and implemented appropriate corrective and preventive actions throughout product development process.
- Directed technical and administrative staff involved in quality control tasks.
- Established key performance metrics and detailed corrective scenarios for failures.
- Designed training curricula for quality control personnel, instructing employees.
- Inspected raw materials and finished products to verify quality and disposed items that did not meet safety requirements.
- Developed training protocols in alignment with company quality standards and ISO 9000 regulations.
- Performed quality inspections and drafted reports to detail non-conforming material issues.
- Coordinated with quality control staff to complete inspections.
Site Engineer
ATC GUINEA
Conakry, Guinea
12.2017 - 01.2018
- Installation of Hangar 12.9mx140.36m (Structural building) for covering roof of Hospital Donka under supervision of PICCINI, Guinea.
- Reviewed construction work against technical designs and drawings to assess compliance.
- Audited sites to collect and analyze structural, electrical and engineering data.
- Communicated with project accounting about monthly subcontractor billings and pay applications.
- Estimated costs associated with labor, equipment and materials required to produce specific designs.
- Set work schedules, coordinated site facilities and monitored progress.
- Assisted project team with conflict resolution between owner, contractor and subcontractor.
- Coordinated and facilitated onsite consultant, regulatory and client representative inspections.
- Visited construction sites daily to evaluate work quality.
- Maintained team safety by controlling traffic around and within site.
- Provided first class customer service to meet deadlines with guaranteed satisfaction.
- Enhanced team efficiency and multitasking abilities by effectively using hand tools, power tools and equipment.
Education
Bachelor of Technology - Mechanical Engineering
IMS Engineering College
Ghaziabad, UP 07.2013 - 05.2017
Skills
2D and 3D modeling
ISO Quality Standards
Product development
Engineering drafting techniques
Computer-Aided Design (CAD)
Mechanical engineering
Budgeting
Project Management
Decision-making strength
Architectural knowledge
Construction techniques
Proficient in AutoCAD
MS Office
Adaptability
Critical thinking
Production line management
Production optimization
Assembly and production
OSHA regulations
Cause and effect analysis
Material handling expertise
Safety and compliance
Strong leadership abilities
Strategic planning
Materials management
Quality assurance training
Operations management
Supply chain distribution
Root Cause Analysis
Accomplishments
- Supervised team of 60+staff members.
- Documented and resolved [Issue] which led to [Results].
- Used Microsoft Excel to develop inventory tracking spreadsheets.
- Process Improvement - Created new departmental procedures manual.Assessed organizational training needs.
- Project Development - Collaborated with team of [team] in the development of [project].
- Doubled plant output by completing process hazard analysis and coordinating equipment procurement and operator training.
- Creative Problem Solving: - Resolved product issue through consumer testing.
- Supervision - Supervised team of three staff members.
- Design - Responsible for creative design for prominent [project].
Software
Solidworks
Advance Steel
Catia
Autodesk Robot Structural Analysis Professional
MS-Office
Ms-Excel
Power Point
C
Interests
Travelling
Sports
Music & Movies
Reading
Social; Media & Internet
Additional Information
PROJECT 2020-2021
- Drafting, fabrication & Installation of different types of Tank for Tri-K Gold Project, Mandiana-Guinea in the supervision of Senet Pty. Ltd.
- Drafting and fabrication of Feed Chute for Senet Pty. Ltd., Guinea
- Design and fabrication of Slew Bearing Platform for GAC Guinea
- Drafting and fabrication of Counterweight for Mill Feed Conveyor for Senet Pty. Ltd.
- Design and fabrication of Monorail for INEO Guinea
- Design and fabrication of Liner for AFCONS Guinea
- Design, fabrication and installation of Fuel Depot, Piping and Reservoirs for Topaz Multi Industries, Guinea.
PROJECT 2018-2019
- Drafting and fabrication of Oil Reservoirs of Capacity 1000M3 and 3000M3 for VIVO ENERGY, GAC, Guinea
- Fabrication and Installation of Pedestrian Bridge for CBG/ FLUOR, Guinea
- Drafting, fabrication and installation of Hangar DONKA (Structural building) for PICCINI, Guinea.
- Design and fabrication of different type of Oil Reservoirs for Total Guinea
- Fabrication and installation of Oil heating Reservoirs for Hassan Hadjou
- Design of Industrial Sliding Gate for IDFCP Guinea
- Fabrication of Vertical Oil Storage Reservoirs for Cacia Guinea
- Drafting and fabrication of different types of support for DTP Mining Guinea
- Design and fabrication of Structural Building for GPC Guinea
PROJECT 2017
- Fabrication and installation of Structural warehouse for IFDCP Guinea
- Drafting, fabrication and Installation of Structural roof covering building for Hospital Donka, Guinea under the supervision of PICCINI
- Design, fabrication and installation of Structural Building for ATC Guinea
· Fabrication of Conveyor Cover for Ashapura Mining Guinea
· Fabrication of Louvered steel Window for AFCONS Guinea
Certification
Industrial Training from NTPC Limited, Badarpur
Work Availability
monday
tuesday
wednesday
thursday
friday
saturday
sunday
morning
afternoon
evening
swipe to browse
Quote
All of our miseries are nothing but attachment.
Osho
Timeline
Training of Health, safety, Security and Environmental ], [ATC Guinea] - [Feb2019-April2019]]
04-2019
Quality Engineer
ATC GUINEA
03.2018 - 09.2018
Production Engineer/Manager
ATC GUINEA
01.2018 - 03.2021
Site Engineer
ATC GUINEA
12.2017 - 01.2018
Assistant Design and Drafting Engineer
ATC GUINEA
06.2017 - 03.2021
Diploma In Product Design from CADD Centre Training Services, Ghaziabad. India
05-2017
Industrial Training from NTPC Limited, Badarpur
06-2016
Bachelor of Technology - Mechanical Engineering
IMS Engineering College
07.2013 - 05.2017