Dr. Shashidhara L. C

Inspiring Professor brings advanced teaching skills and department leadership experience. Goal-oriented to advance department, improve teaching and modernize courses. Considerable experience in developing curricula using cutting-edge technologies and academic research. Competent in content creation, report writing, idea development, and brainstorming utilizing AI tools like ChatGPT, and JasperAI.

· ChatGPT - Artificial Intelligence (AI) chatbot

· Jasper AI - Content generator AI tool

· QuillBot - AI Paraphrasing Tool

· Grammarly - Generative AI support and advanced writing suggestions

· Microsoft Office

· AutoCAD - 2D and 3D CAD software

· Fusion 360 - 3D modeling cloud-based CAD/CAM/CAE/PCB platform

· Autodesk Inventor - 3D CAD software is used for product design, rendering and simulation

· Ansys - Engineering simulation and 3D design software

• Technology-Based Curriculum Development and Teaching
• Application of ChatGPT & Other AI-Powered tools for content creation
• Academic Research and Publication
• Fracture and Fatigue failure analysis of engineering materials & structures
• Robotics & Automation
• Artificial Intelligence & Machine Learning
• Digital Manufacturing
• Technology Implementation and software training

• L. C. Shashidhara, M. A. Umarfarooq, N. R. Banapurmath, Tabrej Khan & Tamer A. Sebaey, “Brittle Fracture Failure Analysis under Mixed-Mode Condition Using Asymmetric Edge Cracked Semicircular (AECS) Configuration” Springer, METCENT 2023: Proceedings of the International Conference on Metallurgical Engineering and Centenary Celebration pp 286–296. 15 October 2023, https://link.springer.com/chapter/10.1007/978-981-99-6863-3_29
• Shashidhara. L. C, Dr. Srinivas. H. K, Dr. C. Anil Kumar, 'Mixed-Mode Fracture (KI & KII) Evaluation In Epoxy Resin Using ASENB Configuration', Journal of Mines, Metals & Fuels, Volume 69, Issue 12A, December 2021 DOI: https://doi.org/10.18311/jmmf/2021/30141
• Experimental Investigation of Mixed-Mode I/Ii Brittle Fracture That Uses Asymmetric-Semi Circular Bend Specimen, IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308, Volume: 05 Special Issue: 09 | NCTTMT-2016 | May-2016, Available @ http://www.esatjournals.org
• A Review on Investigation of Mixed-Mode Fracture in Brittle Materials, IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308, Volume: 05 Special Issue: 09 | NCTTMT-2016 | May-2016, Available @ http://www.esatjournals.org
• Finite Element Evaluation of Mixed-Mode Stress Intensity Factors in Epoxy Resin, IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308, Volume: 05 Special Issue: 09 | NCTTMT-2016 | May-2016, Available @ http://www.esatjournals.org

• Presented paper titled 'Brittle Fracture Failure Analysis under Mixed-Mode Condition Using Asymmetric Edge Cracked Semicircular (AECS) Configuration' in Proceedings of the International Conference on Metallurgical Engineering and Centenary Celebration -METCENT-2023, 26-28 October, IIT (BHU) Varanasi, India on 07/09/21 and 07/10/21
• Presented paper titled 'Mixed-Mode (KI & KII) Fracture Evaluation in Epoxy Resin using ASENB configuration' 5th International Conference on Advanced Research in Mechanical, Materials, and Manufacturing Engineering (ICAMMME-2021) at Reva University on 07/09/21 and 07/10/21
• Presented paper titled 'Determination of Stress Intensity Factor under Biaxial Loading Using Finite Element Method' in 4th national Conference on 'Topical Transcend in Mechanical Technology (TTMT)' held on 05/07/16 conducted in SJB Institute of Technology
• Presented paper titled 'Evaluation of Mixed-Mode Fracture in Epoxy using SENB specimen configuration' International Conference On Advanced Trends Mechanical And Aerospace Engineering (ATMA-2019) 7 – 9th November 2019 in Dayananda Sagar University

• Attended 2 days faculty development workshop on Autodesk Fusion 360 at Autodesk India Pvt. Ltd., Bengaluru on 27th and 28th July 2023
• Two weeks Faculty Development Programme on "Industrial Automation & Robotics" organized by JSS Academy of Technical Education, Bengaluru in association with National Institute of Technology, Warangal. 1st Aug– 13th Aug, 2022
• Has Participated in the AICTE Sponsored National Level Five Days Virtual Short Term Training Program (STTP) on 'TECHNOLOGY ENABLERS FOR SMART MANUFACTURING USING INDUSTRY 4.0' from 07/12/21 to 07/16/21
• Has participated in the short term course on 'Computational Fracture Mechanics' organised by the School of Mechanical Sciences, Indian Institute of Technology Bhubaneswar, during 05/24/21 - 06/04/21
• Attended workshop on 'Finite Element Methods & Practical Stress Analysis' conducted organized by NAFEMS, India 2018
• Attended 'Ansys Structural Training' from 01/17/17 to 01/19/17 organized by Mechanical Department, SoE and M/s. Innovent
• Participated in 6-day FDP program on 'Introduction to CATIA Design Tool' organized by M/s. Dassault Systems, the technology partner for COE and M/s. Dysmech Competency Services Pvt. Ltd. (DCS)
• Participated in 'Geometrical Dimensioning and Tolerance (GD &T)' training in SoE, DSU
• Participated in 5 days FDP on 'Hydraulics, Pneumatics, PLC, Industry 4.0' in collaboration with Rexroth Bosch and DSU
• Participated in 'Training on Educational Methods and Principles (TEMP)' 2-days Residential Training for faculty of Engineering Colleges organized by Shruth & Smith Foundation and VTU
• Participated in the Entrepreneurship Awareness Camp held at RITM, Bangalore, Conducted by Entrepreneurship Development Cell, VTU, Belgaum

• Conducted 2 weeks corporate training on Autocad Fusion 360 & Inventor for Buhler India employees from October 09-21, 2023 in DSU
• Conducted a 2 weeks Value-added course on “Generative Design with Autodesk Fusion 360” 25th Sep–7th Oct 2023 in DSU
• Organized Industrial Visit to M/s. Kamath Plastics Private Limited, a renowned and well-established company known for its excellence in the field of plastic manufacturing on September 20th, 2023
• Worked as coordinator & Session Chair in a week-long International Workshop on “Smart Structures and Aeroelasticity” between 9-13th January 2023, sponsored by ARDB in DSU
• Organized a one-week faculty development program on Hands-on Training on 3D Printing from 27-07-2022 to 03-08-2022 in DSU
• Working as department coordinator for NAAC & IQAC
• Worked as internal coordinator for Ernst & Young Advisory
• Working as member Board of Studies (BoS) in mechanical engineering and involved in continuous updating and framing of the curriculum for B.Tech & M.Tech programs
• Working as M.Tech coordinator from 2015-16 to till date
• Worked in UGC coordinator during the UGC visits and involved in various university promotional activities
• Worked as Coordinator for the mechanical engineering student association, 'Yantrarnav', hosted a Tech Fest, 'ISOFLARE', on 1st April 2017 at the DSU campus Also Involved in DSAT online and offline examinations and DSAT counselling work
• Functioned as examination custodian for school of engineering, DSU from 2017 to 2019.
• Worked as convener for a pre-conference workshop on “Finite element methods & Practical stress analysis” conducted 29th August 2016 jointly organized by Dayananda Sagar University & NAFEMS, India at DSU campus, Bengaluru
• Involved in setting up of new labs like Machine shop, Design Lab, Modeling Analysis & Simulation Lab, Materials Testing Lab in DSU.

• Religion: Hindu
• Date of Birth: 06/04/82
• Nationality: Indian

• Dr. Narayana Swamy, Director, School of Engineering, REVA University, Bengaluru, Karnataka, 560064
• Dr. M G Ananth Prasad, CEO, CIIRC, Jyothi Institute of Technology, Bengaluru, Karnataka, 560082
• Dr. H K Srinivas, Professor, Dept. of Mechanical Engg., SJB Institute of Technology, Bengaluru, Karnataka, 560060