HARIPRAKASH S

1. Sea Cooling Water Network Rehabilitation & Ethylene Glycol Unit Turn Around Maintenance

1. 12" WG line Replacement for 70 meters

2. 6" WG line Replacement for 30 meters at critical Location.

• Utilized proper tools and materials to adhere to safety guidelines.
• Provided emergency response to handle urgent breakdowns.
• Created and maintained daily and weekly reports for upper management.
• Reported on work progress to manager and incorporated feedback to maintain tight schedules.

Plant-201 & 202 (CDU/VDU & MEROX UNIT) Furnaces, Columns & Vessels, Heat Exchangers, Fin Fan Coolers Maintenance, Piping jobs, Re-tubing of Heat Exchangers during Refinery-3 M&I Shutdown 2021 at CPCL-Manali (August 2021 to October 2020)

• Replacement of APH 4 Modules from Furnace including Glass type
• Removed all 4 modules and again re-fixed new modules.
• Removed Stack and Re-fixing of stack also done within period,
• Completed job in short period (28Days)
• Maintenance of Columns , Vessels ,Drums & Heat Exchangers.

• Refinery – I Flare Seal pot drum repair works. (2011-2012)
• Annual Rate Contract (ARC) for Static Mechanical Maintenance in CPCL (2012 – 2014)
• Rerouting of Pipe lines inside Tank-805 dyke to outside dyke for Enabling Tank-626 at CPCL. (2014)
• FABRICATION OF UG & AG PIPING WORKS FOR SULPHUR BLOCK OF RESID UPGRADATION (Punj Lloyd) December -2014 to May – 2015 at CPCL.
• Repair & Maintenance of Static Equipment & Piping jobs in Plant-78 & 79 during M&I Shut down June – 2015 at CPCL.
• Repair & Maintenance of Static Equipment jobs in Ref III during M&I Shut down August – 2015 at CPCL.
• AG PIPING WORKS FOR SULPHUR BLOCK OF RESID UPGRADATION (Punj Lloyd) May – 2016 to September-2016 at CPCL.
• Maintenance and Piping, Structural replacement jobs in Plant- 74 Shut down at CPCL. (November 2016 to January 2017)
• MAINTENANCE JOB IN FURNACE, HEAT EXCHANGERS SD PLANTS 15,17&18. AND PIPING RPLACEMET JOBS IN Pt-15 & 16 (January 2017 to March 2017)
• ARC for Mechanical Maintenance Onsite Field works Zone I / REF-I & II (June 2017 to September 2019)
• MAINTENANCE JOB IN FURNACE, HEAT EXCHANGERS SD PLANTS 1,2&73 and piping replacement jobs DURING SHORT SHUTDOWN (September 2017)
• MAINTENANCE AND PIPING ,STRUCTURAL REPLACEMENT JOBS AT PT 77 COLUMNS,VESSELS & EXCHANGERS DURING M & I SHUTDOWN (October 2017 to January 2018)
• MAINTENANCE JOB AT FURNACE, COLUMNS & HEAT EXCHANGERS AND PIPING, STRUCTURAL REPLACEMENT JOBS IN PLANT 13 M&I SD (July 2018 to February 2019)
• MAINTENANCE JOB AT FURNACE, COLUMNS & HEAT EXCHANGERS AND PIPING, STRUCTURAL REPLACEMENT JOBS IN PLANT14 M&I SD (October 2018 to November 2018)
• ARC for Coating & Wrapping of Underground Pipelines in REF-I & II (January 2019 to April 2021)
• Maintenance Jobs in Columns & Vessels in Plants 1, 2, 9, 10 & 12 during Ref-1 M&I Shutdown 2019 (September 2019 to October 2019)
• Maintenance Jobs in Plant 1 Furnaces & APH during M&I Shutdown-2019 at CPCL-Manali (September 2019 to October 2019)
• Glass APH module # 4 replacement jobs in 1F-01A Crude Heater in Refinery -1 2020 at CPCL-Manali (July 2020 to August 2020)

Aryan Coal Power Plant 600MW X 2 unit in Korba , Chhattisgarh, India.

• Captured technical schematics for use in project planning and execution.
• Conducted research to test and analyze feasibility, design, operation and performance of equipment, components, and systems.
• Wrote, reviewed and edited technical document in accordance with template requirements.
• Developed work plans for various personnel roles based on strengths and talents.

Assisting in piping Design for Execution Team

• Worked with team members to refine task workflows for greater productivity.
• Cleared work sites of hazardous items.
• Painted walls, ceilings and other surfaces.
• Finished assigned work on schedule with minimal supervision.

Producing Plastic Components for Automobile Industries- Plastic Injection Molding

• Worked effectively in fast-paced environments.
• Proved successful working within tight deadlines and a fast-paced environment.
• Learned and adapted quickly to new technology and software applications.
• Skilled at working independently and collaboratively in a team environment.