Summary
Work History
Education
Skills
Timeline
Personal Information
Technical Profile
Personal Information
Deceleration
Overview
Generic
IQUBAL AHMED

IQUBAL AHMED

Sr Mechanical Engineer-Piping
Rajasthan

Summary

Having more than 13+ Years of experience as a Sr Piping Engineer (Mechanical ) Covering various activities, Piping Engineer adept at maximizing efficacy of new construction plans and eliminating
wasteful future spending through pre-emptive elimination of bottlenecks. Ranging from Mechanical Construction, Erection, Fabrication, Process Piping, & Steel Structure in Oil & Gas Industries & Oil Refineries.

Work History

Sr Field Engineer

Tata Projects Limited
11.2023 - Current

Company Overview: We undertake the establishment of crude oil storage terminals and handling facilities, EPC of refinery process units and petrochemical projects. We also have a strong service offering in this sector including repairs and refurbishment solutions, inspection and expediting services, vendor assessments, and others. Some of the other clients include ONGC, HPCL, BPCL, IOCL, Cairn Energy, ADNOC, and EGPC among others.

  • Interacted effectively with site engineering team and field staff to coordinate work that complied with design and construction documents.
  • Interface with TPL-Head Office & Site in resolving engineering related issues faced during site execution.
  • Provide Filed Engineering support to TPL construction team.
  • Thorough knowledge and hands on experience of piping specification.
  • Prepare & issue Field Design Change Notes (FDCN).
  • Provide Filed Engineering support to TPL construction team.
  • Prepare/ initiate TQs to PMC (EIL) to seek clarifications, if required.
  • Raise material request list for emergency procurement for material not available in MTO.
  • Prepare red mark-up Isometrics & Piping GA Drawings for site execution for minor changes.
  • Assist site team for reconciliation of piping bulk materials.
  • Assist site in preparing punch list for Mechanical completion.
  • Take an action on open punch list points related to engineering.
  • Ensure that records of all as-built markup are regularly maintained.
  • Ensure completeness of as-built documentation post mechanical completion.
  • Hired and supervised subcontractors to improve production and meet critical deadlines.
  • Identified major issues that could arise and provided solutions for these problems.

Sr Engineer-Piping

L&T Hydrocarbon Saudi Company
08.2023 - 10.2023

Company Overview : This project known as the Enhanced LPG piping network at Juaymah gas export facility in Saudi Arabia . The value of the main engineering contract awarded is estimated to be 90$ million. Four contractors have prequalified to submit bids for the EPC contract. The contractor to provide 156 piping tie-in and installed 15 kilometers of pipeline network among other jobs.

  • Thorough knowledge and hands on experience of piping specification, fabrication, Painting and erection techniques
  • Brown Field experience with all Tie-in Activities
  • Prepare & issue Field Design Change Notes (FDCN
  • Site verifying, Manpower calculations, Equipment calculations for Project
  • Provide Filed Engineering support to Lnt construction team
  • Raise material request list for emergency procurement for material not available in MTO
  • Require brief outage to remove the blind flange and connect the tie-in piping
  • Assist site team for reconciliation of piping bulk materials
  • Material ordering as per customer specifications and norms
  • Assist site in preparing punch list for Mechanical completion
  • Ensuring all materials are used and work performed are as per specifications
  • Day-to-day management of the site, including supervising and monitoring the site labor force and the work of any subcontractors
  • Hazards associated with handling the materials last in the line
  • All personnel involved or affected by the procedure
  • Act on open punch list points related to engineering
  • Ensure that records of all as-built markup are regularly maintained
  • Prepare/ initiate TQs to PMT (Armco) to seek clarifications, if required
  • Assist site in preparing punch list for Mechanical completion.
  • Controlled project costs by approving expenditures.
  • Adhered to timelines to meet quality assurance targets.

Sr Piping Engineer

NBTC Group ( Naser Mohamed Al-Baddah & Partner For General Contracting Company LLC ABU DHABI )
05.2022 - 04.2023
  • Thorough knowledge and hands on experience of piping specification, fabrication, and erection techniques
  • Brown Field experience with all Tie-in Activities
  • Carry out lay-out study, tie-in, independently able to develop piping deliverables, the scope of work, work definitions, piping specifications, datasheets, requisitions, piping engineering
  • Plant Shutdown work experience
  • Execution planning of Tie-in work during shutdown
  • Co-ordination with Material & Consumable Procurement
  • Reconciliation of Material and Billing quantity
  • Responsible for proper and timely execution of project deliverables ensuring full compliance with quality management system and any project-specific contractual requirements
  • Ensure effective communications among other engineering disciplines and project management teams
  • Participate in progress review meetings and be aware of project status, progress, delays, change notices, performance measurement, lessons learned, and close-out
  • Ability to prepare documents for piping related workshops such as model reviews for lay-out and actively participate in same
  • Takes personal responsibility for safety and healthy environment on the projects
  • Produce proposals for projects which involve man-hour and schedule estimates for piping discipline
  • Able to add value plus/ optimization idea
  • Attending to RFI's raised by concerns at various stages.
  • Oversaw calculation of technical specifications for use in procurement of piping components and raw materials.
  • Documented and developed engineering procedures and processes.
  • Participated in design reviews for new construction, analyzing planned piping, conduits and engineering models

Piping Engineer

Galfar Engineering & Contracting S.A.OG
05.2017 - 04.2022
  • Prepared engineering calculations for hydraulic models, stress analyses and other simulations and plans
  • Participated in design reviews for new construction, analyzing planned piping, conduits, and engineering models
  • Performed system analyses of established user equipment and proposed plans, providing in-depth data on discovered issues
  • Oversaw calculation of technical specifications for use in procurement of piping components and raw materials
  • Co-ordinate day -to-day activities related to project execution
  • Monitor and correct any deviation in drawings/design to suit client's requirements
  • To guide designers to prepare piping isometric drawing and check for suitability etc
  • Review vendor documents and compare for suitability and raise comments and queries for the same
  • Responsible for counter checking by Isometric/Piping plan for spools erected in correct location, orientation, alignment, and plumpness
  • Carrying out final P&ID check of installed piping systems in the module
  • Preparation of field piping system test packages, including system limit on P&ID and piping Isometrics
  • Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project
  • Ensure that hydro test reinstatement is to be done as per procedure
  • Maintain Daily, Weekly, and monthly Progress Reports Familiar for Quality Inspection Plan Spool Fabrication and Erection Inspection as per Isometric Drawings
  • Provide on-site piping engineering consultation during construction, pre- commissioning & commissioning stage
  • Prepare the AS Built drawing according to the site conditions
  • Accident-free atmosphere
  • Safe working always
  • HSE guidelines are applied to projects
  • Prepared engineering calculations for hydraulic models, stress analyses and other simulations and plans.
  • ADD

Piping Engineer

Saad Trading & Contracting Co
09.2014 - 01.2017
  • Participated in design reviews for new construction, analyzing planned piping, conduits and engineering models.
  • Oversaw calculation of technical specifications for use in procurement of piping components and raw materials.
  • Created 3D models and 2D drawings of planned piping structures and designs.
  • Preparing technical specifications and design instructions pertaining to plant design requirements and drafting procedures.
  • Follow up with the Punch list work & EPC contractor construction planning and progress on daily basis.
  • Knowledge of Safety procedures, H2S awareness confined space entry, breathing apparatus usage in Oil & Gas Industries, and maintained.
  • Review AFC documents such as client specifications, standards & special instructions noted.

Mechanical Engineer

Neo Structo Construction Ltd.
05.2010 - 07.2014
  • Reviewed technical drawings developed by CAD technicians and drafters
  • Altered and modified designs to meet requirements and eliminate malfunctions
  • Communicated project requirements and areas for improvement in design review meetings
  • Attended project planning meetings to coordinate mechanical piping designs with structural and architecture teams, mitigate design conflicts, and coordinate delivery timelines
  • Evaluated final product's overall performance, reliability, and safety
  • Ability to work in fast paced environment and handle multiple tasks
  • Resourceful team player with great attention to detail
  • Vast experience working as a Piping Supervisor
  • Leadership skills with experience in managing crews of up to 100
  • Familiar with International design codes; ASME31.1 & 31.3, ASTM & API
  • Responsible for planning, organizing, execution of piping fabrication and erection works
  • Allocation of material, manpower and equipment for daily work activities
  • Monitor all piping installation and modification activities
  • Ensure the productivity and high quality of the subordinates and the sub- contractors' activities
  • Provided “flanged joints tightening” demonstration to 120 supervisors and team leaders
  • Responsible of Pressure Testing activities of piping systems
  • Provide assistance in Pre-Mechanical Completion activities
  • Checking of piping and vendor drawings in accordance with specification and codes.

Education

Bachelor of Science Engineering - Mechanical Engineering

University of Magadh
Bodh Gaya
06.2006 - 05.2010

Skills

Study Isometric & P&ID drawing Review and review as site condition

undefined

Timeline

Sr Field Engineer

Tata Projects Limited
11.2023 - Current

Sr Engineer-Piping

L&T Hydrocarbon Saudi Company
08.2023 - 10.2023

Sr Piping Engineer

NBTC Group ( Naser Mohamed Al-Baddah & Partner For General Contracting Company LLC ABU DHABI )
05.2022 - 04.2023

Piping Engineer

Galfar Engineering & Contracting S.A.OG
05.2017 - 04.2022

Piping Engineer

Saad Trading & Contracting Co
09.2014 - 01.2017

Mechanical Engineer

Neo Structo Construction Ltd.
05.2010 - 07.2014

Bachelor of Science Engineering - Mechanical Engineering

University of Magadh
06.2006 - 05.2010

Personal Information

Vaccination Status: Fully Vaccinated

Gender: Male

Date of Birth: 15/01/1988

Nationality: Indian

Marital Status: Married

Passport No: P5656909

Date of Issue: 04/02/2017

Date of Expiry: 03/02/2027

Technical Profile

Microsoft Office, Auto Cad

Personal Information

  • Passport Number: P5656909
  • Passport Date Of Issue: 02/04/17
  • Passport Expiry Date: 02/03/27
  • Date of Birth: 01/15/88
  • Gender: Male
  • Nationality: Indian
  • Marital Status: Married
  • Vaccination Status: Fully Vaccinated

Deceleration

I hereby declare that the above furnished information is true to the best of my knowledge.



                                                                                                                             Iqubal Ahmed

Overview

14
14
years of professional experience
4
4
years of post-secondary education
3
3
Languages
IQUBAL AHMEDSr Mechanical Engineer-Piping