Kumar Swaminathan
Vellore,TN
Overview
26
26
years of professional experience
Work History
Sr E & I Engineer
Atlantis UAQ Limited
04.2011 - 07.2024
- Project tender evaluation specifically in technical and eligibility checks of pre-qualified contractors
- Responsible for efficient operation and technical management of all electrical & instrument equipment /machines
- Responsible for maintaining E & I Equipment critical Stocks and spare management / updating CMMS and Master Inventory
- Responsible for monitor and maintain preventive maintenance schedule and manage technical requirements and work force (vendor and contractor) and c
- Preventive, routine, breakdown, corrective maintenance of electrical, control system and field instruments
- Preventive, Routine, Breakdown, Corrective and Shutdown Maintenance for the UPS,415VAC Distribution Boards,24VDC Distribution Board, Well Head Control Panels, Diesel Generator, Navigation System, Chemical Injection Skid, Lighting Distribution board, RTU Communication System, RTU SCADA System, F & G, Safe Guard System, MTU etc
- Coordination with service provider for Calibration and maintenance of all types of transmitters, control valves, shutdown valves, F &G detectors, Heat Detector
- Ordering spares required for E & I Equipment as per vendor recommended or equivalent specification
- Involved in HAZOP Study, JSA, MOC making suggestion and preparation
- DCS, SCADA, PLC PROFILE:
- HONEYWELL DCS
- ABB (AUGUST) PLC
- Invensys (Triconex) PLC
- Allen Bradley SCADA
- General Monitor for Fire & Gas System
- Siemens Electrical Cubicle (Controlled by PLC)
- Cuttler & Hammer MM2 (Motor Management System) Electrical Cubicle
E & I Project Engineer
ADYARD Abu Dhabi L.L.C, U.A.E.
04.2005 - 03.2011
- Witness of Calibration and maintenance of all types of transmitters, control valves, shutdown valves, F &G detectors
- Involved offshore & onshore construction/ plant maintenance & modification EPC projects related to the various Refineries, Oil & Gas Companies in Abu Dhabi such as ADMA, FRCL, GASCO, TAKREER, and ZADCO
- Authorized to Raise the Work Permit for (Cold Work, HOT Work, Work at Height, Vessel Entry, Excavation, Vehicle Entry, Electrical Isolation, Process Isolation, etc)
- Detail Engineering of Electrical & Instrumentation System as per given standard specification
- Preparation of detailed site survey report, method statement, Inspection Test Procedure
- Design and Engineering of Electrical Cubicle and reviewing
- Preparation of cable schedule, junction box schedule, cable layout, cable tray layout, Insulation test report, loop test report, pre-commissioning report, commissioning report, PSSR (Pre Start-up Safety Review), Inspection Test Report, Electrical Equipment Test Report
- Preparation of Data Sheet, Specification Sheet
- Preparation of Comparative statement, technical specification for installation & testing, commissioning of electrical & instruments equipment etc
- Preparation of Punch list in erection, activities and organized to attend the punch list
- Maintaining the test reports/ records for systems wise and handing over to client and company
- Minimizing down time and to the achievement of production targets
- Developing PLC Logic and Relay Logic interlocks
- Fault finding and rectification for Electrical & Instrumentation systems
- Good understanding of process Electrical & Instrumentation
- Good knowledge of process control systems
- Good knowledge of fire and gas detection systems
- Job assignments to Electrical & Instrument Supervisor and Technicians
- Inspection (FAT) and expediting for the ordered instruments
- Coordination with client and vendor for SAT
- Worked as E & I Project Engineer
- Compressor Retrofit works for GASCO (11K-101,14K-101,81ME-105)
- Loading and unloading facilities of lubricity additives for tank T-243 and T-244
- Enhancement of ESD System at Abu Dhabi Refinery, Implementation of SIL-2 Recommendation
- FRCL (Fujairah Refinery) Revamping of unit700 &600 at FRCL
- ATLANTIS Holding Norway As (UAQ Well Head Platform )
- Fresh Water & Salt Water System Integration & Modification at ADMA OPCO USSC (Contract No.105384)
- TECHNIP (CTJV), Qatar Gas II Development Project CLP phase4 (Birth5)
- RAK Petroleum West Bukha (INDAGO) field development project
- FLOUR, Qatar Gas II Development project CLP phase-6
Instrumentation Supervisor
South Pars Oil & Gas Plant Phase4 &5, Iran (Client: ENI)
02.2004 - 02.2005
- Inspection, Installation, Testing, Commissioning of Electrical Cubicles in Various Substation
- (Substation1 to19 which were located near the unit )
- Inspection, Installation, Testing, Commissioning of Electrical Motors in Various units
- (Slug Catchers, Reception facilities, Condensate stabilization, Oil & Gas Separation, Gas Treating, Pressurization, Distillation, NGL Fractionation, Sulpher Recovery, Utilities, Storage and Jetty area)
- Installation, testing and commissioning of Instrument and Plant air compressor, regenerator compressor, Off-gas compressor
- Responsibility of DCS, ESD, PLC, SCADA Panels Hardware installation and associated cabling
- Responsibility of all the field instruments such as SMART family transmitter’s calibration, installation, process impulse tubing, pneumatic tubing, hydraulic tubing, cable gland and termination
- Responsibilities for all instruments loop checking and pre-commissioning activity
- Inspection, Installation, testing, commissioning of HIPPS Panels ( High Integrity Pressure Protection System)
- Inspection, installation, testing and commissioning of all the ESDV, SDV, BDV, MOV
- Electrical & Instrumentation Operational Test Procedure carried out with client witness
- DCS, PLC, ESD PROFILE:
- YOKOGAWA CS3000 System
- ABB PLC
- Allen Bradley PLC
- Siemens PLC
- Modicon PLC
- HIMA ESD System
- HIMA PLC
- HIMA PLC for Fire & Gas System
- Siemens Electrical Cubicle (Controlled by PLC)
- General Electric, Electrical Cubicle (Controlled by PLC)
- ABB Cubicle (Controlled by PLC)
Instrumentation Supervisor
Thirumalai Chemical Limited, India
05.1998 - 02.2004
- Exposure in Work permit system & safety
- Experience in calibration & trouble shooting of all types of Control valves
- Developing PLC and Relay logics
- Conducting regular instrument training classes
- Responsibility of all Preventive maintenance involved in PA-3 Plant
- Knowledge in TPM concepts
- Attained internal training programs in safety and fire fighting
- Ability to work under deadlines & targets
- Good knowledge in maintenance, calibration & service of all types of the following Electronic/Pneumatic Transmitters
- D/P Tx (Rosemount, Siemens, Yokogawa,ABB)
- Magnetic Flow meter (Rosemount, Khrone, E&H, Yokogawa)
- Vortex Flow meter(Rosemount, E&H)
- Mass Flow meter (Emerson, E&H)
- Siemens Ultrasonic Level Transmitter
- Bubbler System Measurement
- Switches, Gauges for all parameters like pressure, Temperature, level, flow
- Vibration monitoring system in turbine (Bently nevada)
- Weighing System ( Nova controller, Speedac NXT controller)
- Project Handled:
- Phthalic anhydride (Plant142,144) plant DCS modification and Pneumatic instruments to Electronic Instruments conversion project
- Effluent Treat Plant Expansion and related electrical & instrument installation, testing, Pre-commissioning and Commissioning
- Replacement of Switch Condenser from PA2 to PA3 Plant and related instrument installation, testing, pre-commissioning and commissioning
- Expansion PA3 reactor capacity and related instruments installation, testing, pre-commissioning and commissioning
- Utilities plant erection and commissioning (Water Chilling plant ,Inst air plant, Brine chilling plant, Nitrogen plant etc.,)
Education
Electronics & Communication Engineer
Raja Gopal Polytechnic
Gudiyattam, Tamilnadu, India.04-1998
Skills
- Working experience with Microsoft office package2016 (Excel, Word & Power Point)
- Working experience with AutoCAD2007 &2016
- Working experience with Microsoft Project Package
Total Experience
Twenty five (25) Years of experience in the field of Electrical, Instrumentation and Control System of Petro-Chemical, Refinery, Oil & Gas Industries (Maintenance & Projects).
LNGG
English, Tamil, Malayalam.
Timeline
Sr E & I Engineer
Atlantis UAQ Limited
04.2011 - 07.2024
E & I Project Engineer
ADYARD Abu Dhabi L.L.C, U.A.E.
04.2005 - 03.2011
Instrumentation Supervisor
South Pars Oil & Gas Plant Phase4 &5, Iran (Client: ENI)
02.2004 - 02.2005
Instrumentation Supervisor
Thirumalai Chemical Limited, India
05.1998 - 02.2004
Electronics & Communication Engineer
Raja Gopal Polytechnic
Similar Profiles
Ola Adnan MarzouqOla Adnan Marzouq
Architectural Engineer at UAQ MunicipalityArchitectural Engineer at UAQ Municipality
SHERINE IBRAHIMSHERINE IBRAHIM
Arabic Teacher of social-study at SHARJAH AMERICAN INTERNATIONAL SCHOOL UAQArabic Teacher of social-study at SHARJAH AMERICAN INTERNATIONAL SCHOOL UAQ
RAJIN RAJANRAJIN RAJAN
Procurement/Facility Coordinator at Sabaek Factory For Steel Fabrication-UAQProcurement/Facility Coordinator at Sabaek Factory For Steel Fabrication-UAQ
RAMKUMAR MAHENDIRANRAMKUMAR MAHENDIRAN
Automation Test Engineer at Tychon SolutionsAutomation Test Engineer at Tychon Solutions
Jonathan Manova DPJonathan Manova DP
Accountant at Christian Medical College & HospitalAccountant at Christian Medical College & Hospital