MADHURI RAKH

Senior Highway Design Engineer with 14 years of extensive experience in highway design and maintenance, specializing in Civil3D for innovative junction design and comprehensive road safety audit reporting. Proven ability to enhance project outcomes through effective design solutions and a commitment to safety standards. Committed to leveraging expertise to contribute to organizational objectives while advancing career growth in the dynamic field of highway design. Passionate about driving improvements and delivering high-quality results that align with industry best practices.

EXTRAMURAL ENGAGEMENTS

· Mandatory Training Programme on Preparation of Detailed Project Reports (DPR) for Highway Projects for the personnel of Consultants/Concessionaires working in highways (IAHE-NOIDA).

· 15 Day Certification coarse on “Road Safety Audit and other Road Related Safety related aspects. (CSIR-CRRI NEW DELHI).

Detailed Design for 2 Laning of Seetaimai ghat Km 0+000 to Km 7+120 in the State of Maharashtra.2013/14

Responsibilities

Review project inputs including topographical surveys, geotechnical investigation reports, hydrological and hydraulic studies, traffic requirements, and site conditions.

Rehabilitation and upgradation of existing carriageway to two lanes with paved shoulder standards from Kundral to Wazar sect ion of NH -161A from km 52.730 to km 99.250 on EPC mode in the State of Maharashtra. 2013/14

Responsibilities

Review project inputs including topographical surveys, geotechnical investigation reports, hydrological and hydraulic studies, traffic requirements, and site conditions, working on drawing of 2D drawings of Cross sections.

4-Laning of existing 2-laning stretch from Wakhri at km 44.700 to Khudus at km 77.800 (Pkg-2) on Mohol- Alandi Section (design length 33.100 km) of NH-965 in the State of Maharashtra on EPC mode. 2014/15

Responsibilities

Review project inputs including topographical surveys, geotechnical investigation reports, hydrological and hydraulic studies, traffic requirements, and site conditions to support bridge and road structure design. Prepare and review 2D engineering drawings, including cross-sections, longitudinal profiles, structural layouts, and detailed sections, in accordance with project requirements and applicable design standards. Develop bridge and road cross-sectional drawings showing carriageways, shoulders, medians, footpaths, drainage provisions, slopes, structural elements, and other relevant details. Coordinate with design and drafting teams to ensure accuracy, consistency, and constructability of 2D drawings.

Construction Supervision and Detailed Design for 2 Lanning to 4 Lanning of Latur - Pangaon-Renapur road.

Latur 2015/16

Responsibilities

Involved in the Design Alignments, Profiles, cross-sections using civil 3D.

I am also responsible for the Prepare detailed project reports (DPRs) incorporating design parameters, engineering assessments, drawings, quantities, specifications, and other relevant project information.

Prepare and review Good for Construction (GFC) drawings, ensuring that all design details, dimensions, levels, notes, and construction requirements are accurately represented.

Preparation of Detailed Project Report for 4 Lanning of Hubli - Hospet Section of NH-63 in the State of Karnataka. 2016/17

Responsibilities

Prepare and review General Arrangement Drawings (GAD), reinforcement drawings, structural details, bar bending schedules, and construction drawings in coordination with the drafting team. Provide technical support during construction and resolve design-related site issues, RFIs, and construction-stage engineering queries.

PN-34: Improvement to Ashtavinayak Roads (Part-IV) Ranjangaon to Narayangaon Road Km 0/000 to Km 52/907).

Pune, 2016/17

Responsibilities

Involved in the Design Alignments, Profiles, cross-sections, Vehicle Tracking, and 3D Modelling.

I am also responsible for the complete design scope. To clearly understand the project requirements and client expectations. Preparation of detailed project report with good for construction drawings and deliver to clients.

PN-27 Improvements to Roads in Industrial Sector in Pune District Hinjewadi, Chakan,Talegaon, Ranjangaon,Jejuri & Add. Jejuri) (Part II-Talegaon SH55 to Ambi NavlakhUmbre Km 8/00 to Km 12/320, Umbre to Karanjvihire road Km 12/320 to Km 14/358, Vandre Gadad Shiv Karanjvihire Khalumbre Nijhoje Moi to NH50 Km 28/500 to Km 34/950 and Km 47/100 to 55/835, Indori Jambode Navlakh Umbre Road Km 0/00 to 8/770, Bhamboli Ambethan Chakan Road Km 0/00 to9/837, Jejuri(SH-117) to Kolvihire road Km 0/000 to Km 4/551, SH117 to Kolvihire road (MDR-134) Km 16/000 To Km 19/350.

Pune, 2017/18

Responsibilities

Involved in the Design Alignments, Profiles, cross-sections, Vehicle Tracking, and 3D Modelling.

I am also responsible for the complete design scope. To clearly understand the project requirements and client expectations. Preparation of detailed project report with good for construction drawings and deliver to clients

PN-28: Improvements to Belhe-Loni-Pabal-Shikrapur-Ashtapur-Uralikanchan-Jejuri-NewNH-Wathar-Satara Road SH-117 Km 0/000 TO Km 136/500 (Part-1 Belhe to Shikarpur Km 0/000 to Km 59/298). Pune, 2017/18

Responsibilities

I was involved in designing the alignment & profile, corridor modeling, junction modeling, quantity take off using Autodesk Civil 3d, pavement design using IIT pave software & design of road sign & marking as per IRC guidelines & preparation & submission of feasibility report.

PN-35: Improvement to Ashtavinayak roads Dist. - Pune (Part V-Narayangaon to Otur Km 55/000 .to Km 73/457, Bankar Phata to Lenyadri Km 0/000 to Km 11/547, Lenyadri to Ozar Km 0/000 to Km 14/085 and Lenyadri to Ganeshkhind road Km 0/000 To Km 31/026 Excluding Overlap Length Of 21.73 Km) (Proposed Length 53.39 Km) 2018/19

Responsibilities

Prepare and review General Arrangement Drawings (GAD), reinforcement drawings, structural details, bar bending schedules, and construction drawings in coordination with the drafting team. Provide technical support during construction and resolve design-related site issues, RFIs, and construction-stage engineering queries.

Preparation of Detailed Project Report for MSH-06 Major State Highway Madhapur Road in Maharashtra state.Nanded 2019/20

Responsibilities

I was involved in designing the alignment & profile, corridor modeling, junction modeling, quantity take off using Autodesk Civil 3d, pavement design using IIT pave software & design of road sign & marking as per IRC guidelines & preparation & submission of feasibility report.

Preparation of Feasibility Report SH-61 (Upgradation of Existing 2-lane road to 2-lane paved shoulder) in the State of Maharashtra.2020/21

Responsibilities

Involved in the design of horizontal and vertical alignment and preparation of road profiles. Performed corridor modelling and junction/intersection modelling using Autodesk Civil 3D.

Prepared quantity take-offs and estimates using Autodesk Civil 3D. Undertook pavement design in accordance with relevant IRC guidelines. Designed road signs and pavement markings as per applicable IRC guidelines.

AM-II (42-A): Improvement of road Murtijapur Dahigav Gudadhi Umari Akola SH-284 Km 0/00 to 36/800 Part Murtijapur to Akola,B - Akola Malkapur Kanshivani Morgaon Kakad MDR-19 Km 0/00 to 24/500, C -NH -6 to Kolambi Patur Nandapur Part NH -6 Kolambi to Borgaon Khurd Km 0/00 to 7/00. Akola, 2021/22.

Responsibilities

Involved in the design and development of road infrastructure project including horizontal and vertical alignments, profiles, cross-sections.

Responsible for managing the complete design scope, ensuring a clear understanding of project requirements, technical specifications, and client expectations. Prepared detailed project reports and coordinated their timely delivery to clients.

AM-II (42 B): Widening and Improvement to Ukali Bazar Ner

Nandkhed Kinkhed road SH 278 KM 63/00 to 79/00 Tq Telhra Dist Akola Part Kinkhed to Dahihanda.

Akola, 2021/22.

Responsibilities

Involved in the design and development of road infrastructure project including horizontal and vertical alignments, profiles, cross-sections.

Responsible for managing the complete design scope, ensuring a clear understanding of project requirements, technical specifications, and client expectations. Prepared detailed project reports and coordinated their timely delivery to clients.

AM-II (50 A): Improvement of road Raver Patundi Pimplagaon Kale Khandavi Jalgaon Tunki Hiwarkhed Akot SH 47 (km 116/600 to 156/000) 2022/23

Responsibilities

Involved in the design and development of road infrastructure project including horizontal and vertical alignments, profiles, cross-sections.

Responsible for managing the complete design scope, ensuring a clear understanding of project requirements, technical specifications, and client expectations. Prepared detailed project reports and coordinated their timely delivery to clients.

AM-II (50 B): Consultancy Services for the Prepartion and

Finalization of Detail Project Report for Imopvement with widening on Pandhari Godhkindi Murzadi Chichghat Jodmoha Nanza Potgavan Lohara Dhotra Parsodi Sawargaon Chincholi to District Border Road MDR-18 Km. 13/200 to 49/900 2022/23.

Responsibilities

Involved in the detailed geometric design and development of road infrastructure project including horizontal and vertical alignments, profiles, cross-sections.

Investigation And Conducting Road Safety Audit of Accident Spot at Ashok Watika Chowk in Akola City Dist. Akola. 2023/24

1) Investigation And Conducting Road Safety Audit of Accident Spot at Flyover Near SP Bunglow (ASHOK WATIKA) In Akola City Dist. Akola

2) Investigation And Conducting Road Safety Audit of Accident Spot at Front in Mount Carmel school (Near Agrasen Chowk) In Akola City Dist. Akola.

3) Investigation And Conducting Road Safety Audit of Accident Spot at Washim Naka (273A) In Akola City Dist. Akola.

Responsibilities

· Conduct detailed site inspections to identify potential road safety hazards, hazardous locations, black spots, blind spots, and deficiencies affecting all categories of road users.

· Carry out crash data analysis to identify accident patterns, high-risk locations, and contributing factors, and use the findings to support road safety assessments.

· Undertake comprehensive design reviews of road geometry, intersections, junctions, traffic signs, road markings, pedestrian facilities, lighting, drainage, roadside hazards, and other safety-critical elements.

· Identify and assess safety risks through risk assessment and risk management procedures and prioritize corrective measures based on the severity and likelihood of potential crashes.

· Prepare detailed Road Safety Audit (RSA) reports, including site observations, identified hazards, risk assessments, photographs, supporting drawings, and recommended mitigation measures.

· Develop practical and implementable road safety recommendations to minimize crash risk and improve the overall safety of road infrastructure.

· Prepare and submit Road Safety Audit reports at various project stages, including:

o Design Stage Road Safety Audit Report

o Construction Stage Road Safety Audit Report

o Pre-Opening Stage Road Safety Audit Report

o Operation/Existing Road Stage Road Safety Audit Report

· Review the implementation of recommended safety measures and conduct follow-up inspections, where required, to verify the effectiveness of corrective actions.

· Assess temporary traffic management and work-zone safety arrangements during the construction stage, including signage, barricading, traffic diversions, pedestrian movement, lighting, and lane closures.

· Coordinate effectively with the client, road authority, designer, contractor, traffic police, and other relevant stakeholders throughout the audit process.

· Present audit findings and safety recommendations to project stakeholders and provide technical inputs for addressing identified safety deficiencies.

· Maintain proper documentation of site inspections, crash analysis, audit findings, risk assessments, photographs, drawings, recommendations, and stakeholder responses.

· Ensure that road safety assessments are carried out in accordance with applicable road safety standards, guidelines, specifications, and project requirements.

CRIF Budget Works – i) Improvement to Dabki, Amanatpur Takoda, Khadki, Savangi, Mohadi, Bhod, Km.0/00 to 15/500 (Dist. Akola). ii)Improvement to Manasgaon -Nimba-Dabki-Railway gate to NH Km 42/500 to 44/00 SH-273. iii) Improvement to Nimbhora - Eklara - Wadat - Gonapur - Yelvan MDR-30 Km 11/00 to 18/00. iv) Improvement to SH-284 Mazod Babhulgaon Km 52/00 to 65/00. v) Improvement to MDR 9 Nagad Sagad Hata Hatrun Agar Ugwa Km 25/00 to 32/00

Dist. Akola. 2024/25

Responsibilities

I was involved in designing the alignment & profile, corridor modeling, junction modeling, quantity take off using Autodesk Civil 3d, pavement design using IIT pave software & design of road sign & marking as per IRC guidelines & preparation & submission of feasibility report.

The Execution of Infrastructural Improvement Works Under Pune Grand Challenge Tour (PGCT) Pune,2026/27Dwarka Circle Interchange, Nashik 2025/26.

Responsibilities

As a traffic and pavement design engineer I was responsible for carrying out to analyze traffic surveys and prepare traffic demand projections for highway and urban road projects. Perform traffic data analysis, including traffic volume, axle load, vehicle classification and growth projections for pavement design. Prepare pavement design reports, technical specifications, design calculations and drawings Undertake capacity analysis, Level of Service (LOS) assessment, junction analysis and traffic operational studies. Prepare traffic circulation plans and traffic management drawings. Design road furniture and traffic safety elements in accordance with applicable IRC and road safety requirements. Review traffic signs, delineators, crash barriers, pedestrian facilities and other road safety provisions.

· Mandatory Training Programme on Preparation of Detailed Project Reports (DPR) for Highway Projects for the personnel of Consultants/Concessionaires working in highways (IAHE-NOIDA).

· 15 Day Certification coarse on “Road Safety Audit and other Road Related Safety related aspects. (CSIR-CRRI NEW DELHI).

Engineering Software:

AutoCAD, Autodesk Civil 3D, Vehicle Tracking, IIT Pave, Basics of MX roads.

Industry Standards & Regulations:

MORTH, IRC, AASHTO.

Got an ‘A’ grade in the Drawing competition in Elementary and Intermediate examinations.

Represented the School in many Quizzes and Chess, football, high jump, and kabaddi competitions, and won many prizes at college and district levels