MD ABU HASHIM

Experienced and results-driven electrical engineering professional with nearly 14+ years of expertise in electrical technical engineering, supervision, testing, and commissioning of commercial, residential, hospital, FIFA stadium, and airport projects. Proven record of completing complex projects for a wide variety of corporate clients. Adept at quickly understanding project parameters and requirements. Seeking a collaborative environment to employ skills in delivering high-standard MEP projects. Focus is on ensuring quality, compliance with regulations, and aligning with mission for innovation and excellence in the engineering sector.

• Webuild S.p.A. - Kingdom Saudi Arabia, Lead Technical Engineer - Electrical / Full Time, 09/2023, 06/2024, Royal Commission for Riyadh City (RCRC), RMTC (Parson-Egis-Systra), $6.0b, Responsible for all sorts of design calculations & drawings in order to assure that the equipment meets the project requirements as well as applicable System Standards. Study in detail the project data, Equipment details, Site related information and drawings. Prepare final shop drawing in accordance with the approved base design/ IFC & issued for client approval., Prepare a review detailed assessment of Project documents like IFC drawings, Specifications & BOQ before starting of preparation of shop drawing & execution of works at site., Prepare & review of Voltage Drop calculation & short circuit analysis for LV cable sizing and ampacity calculation for LV circuit breaker sizing., Preparation of Panel Board Schedule & Single Line Diagram of MDB/SMDB., Preparation of Single Line Diagram of Motor Control Center in coordination with the BMS Sequence of Operation, Fire Alarm System & Mechanical Equipment Schedule., Preparation of earthing/lightning protection and getting endorsement from system specialist prior to submission to consultant., Exhibit exceptional proficiency in preparing crucial project documents such as Requests for Information (RFI) & Requests for Site Instruction (RFS), and technical clarifications, thereby ensuring comprehensive project clarity and alignment., Communicate with project management team about drawing deliverable, decision, changes, & addition/alteration in specification for smooth functioning at sites. Supervise & coordinate project work in accordance with contract conditions, working within budget and time constraints., Ensure all technical aspects of the projects are strictly complied with & in conformity with conditions of contract, project specifications, contract drawings & BOQ., Co-ordination with architect, consultant for drawings, revisions, & other related issues., Attending site progress and technical meetings to resolve the issues and problems.
• Midmac Contracting Co. Wll - Qatar, Electrical Project Engineer / Full Time, 12/2022, 08/2023, MATAR (Hamad International Airport), Hill-Dar (HDJV), QAR 2.96b
• Midmac Contracting Co. Wll - Qatar, Electrical Project Engineer / Full Time, 12/2019, 12/2022, MATAR (Hamad International Airport), Hill-Dar (HDJV), QAR 2.72b
• Midmac Contracting Co. Wll - Qatar, Electrical Technical Engineer / Full Time, 11/2016, 11/2019, FIFA Supreme Committee, AECOM Project Management - KEO International Consultants, QAR 2.39bn, Responsible for all sorts of design calculations & drawings in order to assure that the equipment meets the project requirements as well as applicable System Standards. Study in detail the project data, Equipment details, Site related information and drawings. Prepare final shop drawing in accordance with the approved base design/ IFC & issued for client approval., Prepare a review detailed assessment of Project documents like IFC drawings, Specifications & BOQ before starting of preparation of shop drawing & execution of works at site., Prepare & review of MV/LV network layout in coordination with the MEP services., Preparation of shop drawing of Indoor and Outdoor Lighting system, Pitch Lighting, Apron Flood Lighting, Airfield Ground Lighting System., Preparation of shop drawing of Lighting Control System network (Dali & KNX based) & Central Battery System., Prepare & review of Voltage Drop calculation & short circuit analysis for LV cable sizing and ampacity calculation for LV circuit breaker sizing., Preparation of Panel Board Schedule & Single Line Diagram of MDB/SMDB., Preparation of Single Line Diagram of Motor Control Center in coordination with the BMS Sequence of Operation, Fire Alarm System & Mechanical Equipment Schedule., Preparation of earthing/lightning protection and getting endorsement from system specialist prior to submission to consultant., Preparation of Equipment & Cable Containment layout., Preparation of detailed Bill of Quantities (BOQ) as per the drawings., Review and evaluate MEP technical submittals & shop drawings prior to submission to consultants according to the required project standards., Review & Submission of SCADA System's detail design for LV & MV Network., Prepare the list of deliverables & Supervised Testing & Commissioning team in accordance to the commissioning procedure, ensured the system is working normally., Exhibit exceptional proficiency in preparing crucial project documents such as Requests for Information (RFI) & Field Change Request (FCR), and technical clarifications, thereby ensuring comprehensive project clarity and alignment., Communicate with project management team about drawing deliverable, decision, changes, & addition/alteration in specification for smooth functioning at sites. Supervise & coordinate project work in accordance with contract conditions, working within budget and time constraints., Monitor engineering & material requirements as per the planning schedule., Handle procurement activities relating to contracts and subcontracts in accordance with Company's Procedures & Procurement department activities., Method Statement Preparation, submission to consultant & getting approval on it., Ensure all technical aspects of the projects are strictly complied with & in conformity with conditions of contract, project specifications, contract drawings & BOQ., Co-ordination with architect, consultant for drawings, revisions, & other related issues., Attending site progress and technical meetings to resolve the issues and problems., Fully conversant with Computers, AutoCAD, Naviswork & MS Projects.
• Midmac Contracting Co. Wll - Qatar, Electrical Site Engineer / Full Time, 08/2014, 10/2016, Qatar Foundation, KEO International, $8.0b, Attending site-technical & co-ordination meetings., Preparing Schedule for the target achievement., Co-ordination with Client, Consultant & Main Contractor as per their requirement., Co-ordination of MEP Service to avoid clashes between Services., Installation & Testing commissioning of SMDB, DB, MCC, CBS, , Lightening protection, Normal Power, Lighting (Normal & Emergency) & Lighting Control system., Submission of WIR's, As Built Drawings & Documents as per Consultant and Client requirement., Power cable installation & containment for LV System., Preparing Load Schedule & As-Built Drawing as per site installation., T&C Live & Cold Test., T&C FOR MCC`S, SMDB`S, MDB`S ETC
• Unistar Contracting Co. Ltd. - Kingdom Saudi Arabia, MEP Procurement Engineer / Full Time, 12/2011, 02/2014, Thoroughly studies submittal enquiry form (SEF) & understanding the scope of work with the project specification after receiving from the site team., Float the enquiry in the market to get the quotation with the technical details., Solicit material/equipment quotations and verify compliance to the specification., Prepare the comparison statement, negotiate contract price with the vendor at the minimum possible value & submit to the management for the approval., Call supplier for the detailed technical submittal as per project specification & international standard., Releasing Letter of Intent (LOI) to the lowest quoted supplier & received the signed copy of LOI., Capable to release the LPO from the centralized system Xpedeon after receiving indent from the site & collect the required document from the supplier to proceed for the Letter of Credit., Ensure timely preparation of estimate in accordance to priorities as scheduled., Preparation of cost plans, cost estimates and cash flow analysis., Call supplier for the detailed technical submittal as per project specification & international standard.
• EVH JV, Dubai, Electrical Site Engineer / Full Time, 02/2010, 08/2011, EMAAR Properties, Turner, Hyder Consulting, $1.5b, Carry out site inspection on completed works with MEP Coordinator & Consultant in accordance with the approved shop drawings., Commissioning of the Elster's Centralized Metering system and ensure that the Meridien centralized server give the perfect result of 1248 units., Coordinates with the different trades and specialty contractors regarding interfacing works involving electrical & Low current systems., Preparation of Technical materials, technical queries, samples & drawing submittals for consultants approval, Preparing as Built drawings and Load Schedules for Electrical installations., Prepare/facilitates As-built drawing and O & M Manuals for handing over., Submission of As Built Drawings for getting approval from consultant., Attending site meetings concerning the progress of work.
• Marine Electrical & Refrigeration Engineering Works, Mumbai, India, Electrical Trainee Engineer / Full Time, 01/2009, 12/2009, Coordinates with the different trades and specialty contractors regarding interfacing works involving electrical & Low current systems., Attends coordination meetings with the contractors and different trades of work., Execution, testing & commissioning of Final DB, MDB, Meter cabinet & LV panel., Prepare the quantities for the invoice

• Passport Number: N2787655
• Date of Birth: 04/15/84
• Gender: Male
• Nationality: Indian
• Marital Status: Married