MD MOHSIN ALAM
Summary
10 years of experience in Oil and Gas Refinery, Petrochemical, Oil & Gas Wellheads Control System, for Pre-Commissioning, Commissioning with an organization. Knowledge of PLC/DCS/ESD/ F&G System Invensys Foxboro, YOKOGAWA CS-3000 System, Honeywell system, Emerson Delta-V System, Alarm & trip setting, cause & effect checking, Loop checking.
Overview
5
5
years of professional experience
Work History
Commissioning Instrumentation Engineer
Petroleum Development Oman. (PDO) SAOG
10.2018
- Familiar with all Construction Activity related to work in oil and gas
- Review of Project specifications, P&ID, wiring diagrams, loop diagrams and instrumentation related datasheets & documents
- Managed the manpower with organized manner in order to reach the project milestone
- Responsible for preparing technical instructions by using guidelines of materials requirements prescribed by the company
- Prepare for request list of materials to be used on site using Isometric & hook-ups drawings
- Follow the work as per method of statement and risk assessment according to the job specification
- Monitor and ensure the correction of Non-conformance Report items and other issues supporting QA/QC compliance
- Conduct Construction Surveillance activities per requirements and participate in Construction walkthroughs assist in maintaining strict control of QA/QC procedures
- Coordinate QC department on all construction issues and maintain good quality
- As-built drawings, material take-off, man-hour estimations, weekly plan & progress reports
- Monitor and report to construction Manager of the instrumentation construction details, including progress, risks and opportunities in a timely manner
- Pre-Start up Testing of transmitters and Control valves, blow down valves and ESD valves with operator, Deluge Tests, SIL integration Tests, F&G system tests
- Dynamic test witness and sign off
- Pre-Commission/Commission Instruments, Process Control and Shutdown Systems including Safety Systems and PLC systems both in field and on mechanical package units
- Preparation of Instrument loop checks folders, commissioning dossier reviews (Commissioning Test Procedure, ITR’s, Ex-items, MOC’s, Exception reports, etc), Highlight critical issues and sort out with contractors and discipline Lead Engineers
- Main experience is commissioning of various instruments systems/instruments with Vendors /technicians / operators
- Handling the Calibration & Commissioning of instruments Like- PT, DPT, LT, TT, and FT, PG, Make of Rosemount, Yakogawa, Honeywell, ABB Transmitters and Motor Operated Valve, Control Valve, On/Off Valve & MOV Master Station (Rotork/auma)
- Planning supervision and co-ordination with various departments in day to day Pre-commissioning and commissioning activities
- Planning & Execution of control system (DCS/PLC) installation, loop checking, logic checking and commissioning related activities
- Preparation for inspection and testing by Interpretation and compilation of all engineering documents including datasheets, P&IDs, Cause & Effect Diagrams, Loop Drawings, etc
- Wellheads (Oil & Gas) Construction, Pre-Commissioning & Commissioning experience along with HART & FF Protocols
- Ensure that the instrument and control content of the dossiers is accurate and complete before they are accepted from construction and before they are submitted to operations department.
Commissioning Instrumentation Engineer
HEISCO KUWAIT
10.2017 - 08.2018
- Installation of Junction Box Frames/Support, Instrument Stanchions, Fire and Gas System as per Installation on for Project IFC (Issued for Construction) Drawing
- Experience in conducting Factory Acceptance Test (FAT), and Site Acceptance Test (SAT) for Control Systems
- Instrument (Transmitters & Control Valves) Calibration on Bench test and Field Test
- Preparing method of statements for approval according to the client engineering quality system
- Preparation of Instrument loop checks folders, commissioning dossier reviews (Commissioning Test Procedure, ITR’s, Ex-items, MOC’s, Exception reports, etc), Highlight critical issues and sort out with contractors and discipline Lead Engineers
- Pre-Start up Testing of transmitters and Control valves, blow down valves and ESD valves with operator, Deluge Tests, SIL integration Tests, F&G system tests
- Dynamic test witness and sign off
- Handling the Calibration & Commissioning of instruments Like- PT, DPT, LT, TT, and FT, PG, Make of Rosemount, Yakogawa, Honeywell, ABB Transmitters and Motor Operated Valve, Control Valve, On/Off Valve & MOV Master Station (Rotork/auma)
- Calibration of Instruments (Transmitters / Gauges and Loop Indicators) and Control Valves
- Installation for Skid/package Instrument Installation as per Chekiang for Vendor Provided Drawing.
Commissioning Instrumentation Engineer
Olayan Descon Industrial Company
09.2013 - 08.2017
- Manage and oversee the day to day Instrument construction management of the project
- Monitor and report to construction Manager of the instrumentation construction details, including progress, risks and opportunities in a timely manner
- Ensures all changes to specifications, work scope and drawings are documented
- Monitor construction productivity and schedule performance and investigate reasons for less than satisfactory performance
- Continuously monitor instrument Construction activities in progress at site and at critical activities locations against the applicable technical specifications
- Assign the targets for completion dates, according to the project priorities
- Mark red-markups and request for approval if any changes made on site
- Attend daily, weekly coordination meetings with onsite management
- Coordinate QC department on all construction issues and maintain good quality
- Keep good coordination with team and relate the complete information about work
- Review of Project specifications, P&ID, wiring diagrams, loop diagrams and instrumentation related datasheets & documents
- Pre-Commissioning & Commissioning of field instruments like Pressure/ Temperature/ Flow/ Level transmitters, moisture/ vibration/ gas/ smoke detectors, fusible network (deluge system) as per P&ID, hook-up and plot plan
- Review of Project specifications, P&ID, wiring diagrams, loop diagrams and instrumentation related datasheets & documents
- Preparation of Instrument loop checks folders
- Commissioning dossier reviews (Commissioning Test Procedure, ITR’s, Ex-items, MOC’s, Exception reports, etc), Highlight critical issues and sort out with contractors and discipline engineers
- Pre-Start up Testing of transmitters and Control valves, blow down valves and ESD valves with operator, Deluge Tests, SIL integration Tests, F&G system tests
- Dynamic test witness and sign off
- Lead a team of technicians to undertake commissioning activities in projects
- Interfaces with other disciplines to ensure integration of activities
- Assist during the database preparation for pre-commissioning status index and commissioning technical database for Instrument Systems
- Area MC Walk down for Process Instruments, F&G,Deluge Systems, Control System Cabinets etc; raise walk down punch list for critical issues related to CU
- Coordinate Process Control System (PCS) and Safety Integrated System (SIS) integration processes associated with field project execution and field development processes
- Planning & Execution of control system (DCS/PLC) installation, loop checking, logic checking and commissioning related activities
- Knowledge in control logic of Distributed control system (Yokogawa CS3000, Emerson DeltaV, Honeywell) and PLC (Allen Bradley, Siemens)
- Responsible for planning & execution for new projects and commissioning work, expansion/renovation work, and routine check-up of plant instrument
- Hands on experience on all types of process field instruments (pressure, flow, level and temperature elements, transmitters, valves, MOV’s, controllers and communicators Commissioning the HART and Field Bus Digital Valve Controllers (DVC, FISHER) with Delta V control system and doing Partial Stroke Test for the ESD and BDV valves
- Reviewing of P&ID's, Layouts, Control schemes, specifications, Operability and Maintainability studies, participate design reviews, contribute with site requirements, and experience towards a better design
- Ability to interpret wide variety of Documentation related to Instrumentation like Instrument datasheets, P&ID’s, Loop Diagrams, and Hook up diagrams etc
- Supervise the installation of the instrument by following the hook-up drawing and modify if necessary
- Reading and modifying schematics (Diagrams) for PLC,MCC Panels and interconnecting diagrams between them Commissioning and troubleshooting Instruments wish include: Turbidity, pH, Conductivity, Level, Oil, Algae, Flow, Pressure, and Temperature
- Maintenance & calibration of transmitters PT, LT , TT , DPT Foxboro, Thermocouple,RTD and Control valves etc
- Handle the tasks of preparing scheme design, control loop diagrams and P&ID diagrams
- Installation, calibration and loop checking of the field instruments (Emerson Rosemount, ABB, Endress & Hauser, Bently Nevada, Honeywell, Yokogawa.......) Review of drawings (P&ID, instrument layout, general arrangement drawing, cable schedule, interconnection details, instrument index, Instrument hook-up, data sheet, loop diagram, logic diagram and Schematic diagram on the basis of design guidelines
- Preparation and review of control system specific documents list of latest revision like I/O list, Marshaling cabinet wiring diagram, Loop diagram, Cause and Effect diagram, Logic diagram, System architecture, Control philosophy document Plant code, Area code & Unit code wise for Control system installation.
Education
Bachelor of Engineering - Electronics & Instrumentation
R.I.T.S
Diploma - Electronics & Communication Engineering
Maharashtra
Skills
- 3D Models
- Autodesk Navisworks Freedom
- Microsoft Windows-XP environment
- Windows-7
- Windows-8
- MS Excel
- MS Word
- Microsoft Power Point
Personal Qualifications
- Bachelor of Engineering, Electronics & Instrumentation, R.I.T.S, Hyderabad, Andhra Pradesh, India, Passed out
- Diploma, Electronics & Communication Engineering, Maharashtra, 03 Year's
Personal Information
Father's Name: Md Tahir Hussain
New Passport No
V4269301
Old Passport No
K7609197
Disclaimer
I do hereby declare that all the statement as mentioned above are true & correct to the best of my knowledge and belief.
Timeline
Commissioning Instrumentation Engineer
Petroleum Development Oman. (PDO) SAOG
10.2018
Commissioning Instrumentation Engineer
HEISCO KUWAIT
10.2017 - 08.2018
Commissioning Instrumentation Engineer
Olayan Descon Industrial Company
09.2013 - 08.2017
Bachelor of Engineering - Electronics & Instrumentation
R.I.T.S
Diploma - Electronics & Communication Engineering
Maharashtra