Mike Buskirk
Elkhart
Summary
Capable Construction Laborer experienced in operating and maintaining equipment to support job site needs. Physically strong and fit with good time management abilities and dexterity to support skilled work.
Overview
33
33
years of professional experience
2001
2001
years of post-secondary education
1
1
Certification
Work History
Construction laborer/Journeyman Carpenter
Buskirk Construction
Dowagiac
10.1993 - 04.2026
- Operated tools for drywall installation and finishing.
- Assisted in site preparation and cleanup tasks.
- Collaborated with team members for efficient project execution.
- Followed safety protocols to maintain a safe work environment.
- Loaded and unloaded materials for construction projects.
- Supported skilled tradespeople in various tasks as needed.
- Maintained equipment and tools in good working condition.
- Communicated effectively with supervisors regarding project needs.
- Operated a variety of hand and power tools to complete tasks such as sawing, drilling, hammering, and excavating.
- Carried tools and equipment between job sites as required.
- Performed general clean-up activities onsite including sweeping and disposing of debris.
- Used picks and shovels to dig, spread, and level dirt and gravel.
- Loaded and unloaded building materials, tools, and machinery.
- Collected and removed debris from work sites to maintain team productivity and minimize safety hazards.
- Maintained a safe work environment by adhering to safety regulations and guidelines.
- Set up ladders or temporary platforms used in construction projects.
- Maintained clean, safe working environment by removing debris from job site prior to shift completion.
- Mixed cement with sand or water to create mortar for bricklaying applications.
- Repaired damaged structures such as walls or floors when needed.
- Unloaded trucks with supplies for construction projects.
- Assisted in the installation of doors, windows, drywall, roofing systems, and other structural components.
- Installed structures or fixtures using hand or power tools per plan drawings.
- Provided support to skilled tradespeople including carpenters, masons, plumbers, electricians.
- Assisted electrical, plumbing and carpentry teams by completing basic and semi-skilled work.
- Built forms for pouring concrete foundations and slabs.
- Met company and OSHA safety guidelines for work site operations to minimize worker risk.
- Used levels to ensure surfaces were even prior to completing tasks.
- Inspected completed work to ensure quality standards were met.
- Installed insulation into walls before applying drywall panels.
- Conducted regular maintenance checks on tools and equipment used onsite.
- Erected scaffolding according to job specifications.
- Measured dimensions for foundations or other structures prior to pouring concrete or erecting walls.
- Monitored progress of projects to ensure that deadlines were met.
- Used laser measuring tools to calculate lengths, widths, and heights.
- Utilized two-way radios and hand signals to coordinate communication between equipment operators.
- Performed lock-out-tag-out procedures on equipment prior to service work to promote workplace safety.
- Logged inventory to track supply counts, organize equipment, and gather important materials.
- Sustained safety protocols to maintain secure, proper handling of equipment and materials.
- Completed carpentry work and installed crown molding and wood flooring to meet customer preferences.
- Notified supervisors of faulty operations and defective materials to improve production.
- Completed general carpentry, electrical, mechanical, HVAC and plumbing installations and repairs.
- Addressed and resolved on-site problems to keep teams on-task and avoid development of larger concerns.
- Utilized electrical, plumbing and HVAC expertise to complete projects and adhere to timelines.
- Acted as subject matter expert to provide industry insight and assist coworkers.
- Performed demanding physical work over extended periods and modeled positive attitude.
- Dug ditches or trenches, backfilled excavations or compacted and leveled earth to grade specifications.
- Operated equipment with strong focus on safety and ground communication.
- Understood how to operate and maintain job site equipment safely and for maximum productivity.
- Gained independent working skills and guided and mentored less experienced team members.
- Displayed high standards for quality workmanship and routinely double-checked work.
- Assisted with diverse construction challenges to help team and customer.
- Controlled traffic passing near, in or around work zones.
- Demonstrated best safety practices working at heights and lifting various objects.
- Lubricated, cleaned or repaired machinery or equipment.
- Worked productively as lead or helping team member to drive customer satisfaction.
- Measured, marked or recorded openings or distances to construction layout areas.
- Tended pumps, compressors or generators to provide power or heat or move materials.
- Positioned, aligned or sealed concrete wall sections or pipes.
- Signaled equipment operators to facilitate alignment, movement or adjustment of machinery.
- Learned and mastered skilled trade specialties under guidance of expert mentors.
- Installed sewer, water or storm drain pipes using pipe-laying machinery or laser guidance equipment.
- Performed site activities required of green-certified construction practices.
- Constructed frameworks for residential and commercial structures using various materials.
- Collaborated with subcontractors to ensure project specifications were met effectively.
- Operated power tools and hand tools safely to complete carpentry tasks efficiently.
- Installed doors, windows, and cabinetry according to design plans and specifications.
- Maintained job site cleanliness and organization for safety compliance.
- Read and interpreted blueprints to guide construction processes accurately.
- Trained apprentices on proper carpentry techniques and safety protocols effectively.
- Inspected completed work for quality assurance and adherence to building codes.
- Followed OSHA and corporate safety regulations and procedures.
- Read and interpreted specifications, diagrams and blueprints to determine best techniques for job.
- Built stairs, ramps, walls, partitions and frameworks of wood or metal studs.
- Measured and cut wood, plastic, drywall and other materials to specified dimensions using hand tools and power saws.
- Ensured all work is carried out according to local building codes.
- Installed doors, windows, cabinets, frames and trim according to blueprints or verbal instructions.
- Managed movement of materials and equipment to different job sites.
- Assembled formwork for pouring concrete slabs or walls in accordance with engineering plans.
- Carried out general maintenance tasks on building sites including cleaning up debris and rubbish.
- Fitted interior fixtures including kitchen units, shelves and cupboards.
- Spoke with customers to gain better understanding of scope of project.
- Inspected buildings prior to start of construction projects for any existing damage that needs repair.
- Collaborated with other tradespeople onsite during construction projects.
- Performed minor repairs on damaged woodwork items such as window sills or door jambs.
- Laid out flooring systems on site before installation begins.
- Finished surfaces of carpentry work by applying coats of paint or varnish to protect surface from wear.
- Applied weatherproofing treatments to exterior surfaces such as decks and fences.
- Secured structural components together using nails, screws or glue guns.
- Fabricated wooden jigs and templates to aid in the assembly process of parts in production runs.
- Checked accuracy of finished product with measuring tools such as tape measures and levels.
- Installed, assembled and repaired woodwork, millwork, cabinetry, and trim.
- Led apprentices and trainees in building construction and renovation.
- Reviewed jobsite needs with foreman and coordinated construction.
- Used various carpenter's hand tools, portable power tools and standard measuring instruments.
- Performed various carpentry duties, including both rough and finish carpentry.
- Conducted inspections, diagnosed problems, took measurements and made necessary adjustments to complete projects according to specifications.
- Installed cabinets, base cabinets and crown molding.
- Examined buildings and project specifications to determine measurements.
- Used band, circular and compound miter saws.
- Positioned and installed floor joists, trusses and rafters.
- Anchored and braced forms to complete precise joining.
- Applied acoustic paneling to ceilings and walls to adjust sound absorption and rebound within rooms.
- Measured, cut, and installed staircase spindles.
- Applied design-specific wood and composite trim according to architectural plans and neighborhood regulations.
- Procured and completed required permit approvals prior to starting projects.
- Prioritized work, keeping carpentry jobs on task and within budget.
- Cut and installed tile and hardwood flooring for residential and commercial buildings.
- Worked independently on projects and tasks within carpentry team.
- Utilized various tools, equipment, materials and forming systems to complete construction tasks.
- Communicated with teammates and supervisors frequently to understand requirements and complete projects on time.
- Maintained clean and organized workplace to optimize performance, efficiency and safety.
- Roughed in door and window frames or subflooring in structures undergoing construction or repair.
- Took accurate measurements to calculate size and amount of materials needed for project completion.
- Erected scaffolding to assemble above-ground structures.
- Fashioned frameworks or props using hand tools and wood screws, nails or glue.
- Anchored and braced forms and other structures in place using nails, bolts, anchor rods, steel cables, planks, wedges and timbers.
- Adhered to project blueprints and requirements to deliver quality work.
- Consistently constructed square and level projects.
- Verified trueness of construction using plumb and level.
- Bore boltholes in wood, masonry or concrete using electric or pneumatic drill.
- Maintained records and documented actions for progress reports.
Machinist/Quality Control Technician
Flexable consepts
Elkhart
04.2025 - 03.2026
- Operated CNC machines to fabricate precision parts for diverse projects.
- Interpreted technical drawings and schematics to ensure accurate production.
- Maintained equipment by performing routine inspections and preventative matenence.
- Selected appropriate tools for machining processes based on project specifications.
- Collaborated with team members to optimize workflows and improve efficiency.
- Documented production processes and maintained accurate records of work performed.
- Read blueprints, sketches, drawings, manuals, specifications or sample part to determine dimensions and tolerance of finished work piece.
- Changed worn cutting tools as needed during operation.
- Calculated dimensions and tolerances using knowledge of mathematics and instruments such as micrometers or vernier calipers.
- Monitored production output levels and made adjustments as necessary to maintain production goals.
- Measured and marked dimensions and reference points to meet precise specifications.
- Verified conformance of finished work piece to specifications by checking measurements with a variety of precision measuring instruments such as height gauges, surface plates and protractors.
- Trained new employees in the use of machinery used in the manufacturing process.
- Observed machine operations to detect malfunctions or out-of-tolerance machining and adjust machines accordingly.
Laborer/ repair technician.
Forest river
Elkhart
02.2022 - 05.2024
- Completed day-to-day duties accurately and efficiently.
- Contributed innovative ideas and solutions to enhance team performance and outcomes.
- Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
- Collaborated closely with team members to achieve project objectives and meet deadlines.
- Worked with cross-functional teams to achieve goals.
- Utilized advanced technical skills and expertise to troubleshoot complex problems and implement solutions.
- Completed routine maintenance and repair.
Repair technician/ midline quality control
Thor motor coach rv.
Elkhart
03.2021 - 02.2022
- Diagnosed mechanical issues in recreational vehicles to ensure proper functionality.
- Repaired electrical systems, including wiring and battery management, for optimal performance.
- Conducted routine inspections of RVs to identify maintenance needs and safety concerns.
- Collaborated with team members to streamline repair processes and improve efficiency.
- Maintained a clean and organized work environment to enhance safety standards.
- Repaired malfunctioning systems by replacing defective components or making necessary adjustments.
- Examined machines and equipment to diagnose or make repairs.
- Worked with the senior technician to inspect and validate repair parts.
- Reassembled equipment, completing inspections, testing or repairs.
- Followed repair processes, driving high quality and short cycle time.
- Communicated with management, engineering and quality departments to solve technical repair problems.
- Dismantled devices to gain access to and remove defective parts with various hand and power tools.
- Collaborated with team members to troubleshoot challenging repair cases.
- Coordinated repair and maintenance plans with co-workers and supervisors ahead of scheduled projects.
Machinist/General Laborer
Arch Global Services
Elkhart
05.2020 - 02.2021
- Operated CNC machines to create precision components for various industries.
- Inspected finished products for quality and adherence to specifications.
- Maintained tools and equipment to ensure optimal performance and safety.
Laborer/ forklift operator/Production Machine Operator
National Standard
Niles
10.2015 - 01.2019
- Operated machinery to assist in production processes efficiently.
- Maintained a clean and organized work environment daily.
- Collaborated with team members to meet production goals consistently.
- Loaded and unloaded materials for various projects effectively.
- Followed safety protocols to ensure workplace compliance at all times.
- Assisted in training new workers on standard operating procedures.
- Documented inventory levels and reported discrepancies as needed.
- Performed physical activities requiring heavy lifting, walking and standing for long periods of time.
- Completed variety of physical labor tasks.
- Lifted objects weighing up to 50 pounds without assistance when necessary.
- Worked with team members to ensure efficient workflow throughout the day.
- Cleaned work area after job completion ensuring all debris is properly disposed of.
- Assisted with basic maintenance tasks such as sweeping, mopping, painting, and cleaning.
- Operated and maintained a variety of equipment including hand and power tools.
- Collaborated with team members to complete assigned tasks and meet tight deadlines.
- Organized tools, supplies, and equipment needed for specific jobs according to instructions provided by supervisor.
- Met company and OSHA safety guidelines for work site operations to minimize worker risk.
- Loaded and unloaded daily material shipments, keeping products organized and secure to prevent damage and optimize handling.
- Performed repetitive assembly tasks with hand and power tools and automated equipment.
- Transported heavy items from one location to another using hand trucks or carts.
- Performed regular checks of equipment for proper operation and safety compliance.
- Lubricated and cleaned machinery and tools.
- Utilized two-way radios and hand signals to coordinate communication between equipment operators.
- Maintained accurate records of inventory levels and product locations in the warehouse.
- Performed demanding physical work over extended periods and modeled positive attitude.
- Understood how to operate and maintain job site equipment safely and for maximum productivity.
- Displayed high standards for quality workmanship and routinely double-checked work.
- Gained independent working skills and guided and mentored less experienced team members.
- Lubricated, cleaned or repaired machinery or equipment.
- Learned and mastered skilled trade specialties under guidance of expert mentors.
- Operated forklifts to transport materials across the warehouse efficiently.
- Conducted regular inspections of equipment to ensure safety compliance.
- Assisted in training new staff on safe forklift operation practices.
- Followed safety protocols to minimize risks during material handling tasks.
- Identified and reported maintenance needs for forklifts and other equipment.
- Utilized warehouse management systems to track inventory levels effectively.
- Moved freight, stock and other materials to and from storage and production areas and loading docks.
- Maneuvered forklift over and around loaded pallets, boxes and other materials.
- Ensured safety procedures were followed when operating forklifts.
- Maintained current forklift training and certification as required by company policies.
- Performed daily maintenance checks on forklifts to ensure optimal performance.
- Transported material to correct locations and documented inventory changes.
- Communicated with supervisor and other warehouse staff to coordinate work.
- Followed standard work instructions accurately when picking, sorting, staging and scanning products.
- Packaged, labeled and tagged goods before transfer.
- Used handheld scanners for warehouse management system compliance.
- Reported safety and quality issues to management.
- Utilized RF scanner technology while moving stock within facility in order to maintain accurate inventory levels.
- Monitored warehouse aisles to prevent collisions with pedestrians or other equipment.
- Inspected loads prior to lifting to determine weight distribution and stability.
- Picked up warehouse debris and deposited waste into appropriate piles and stacked baled trash.
- Kept record of daily activities such as number of items moved or handled throughout the day.
- Collaborated with team members on various tasks related to storage and transport operations.
- Tracked materials moved for stocking purposes and to complete logs for management.
- Moved levers or controls of lifting devices to load, unload or stack material.
- Drove gasoline- or electric-powered vehicles to transport materials between loading, processing and storage areas.
- Estimated weights, heights, and centers of balance to make precise placements.
- Inspected product load for accuracy to foster timely and complete delivery.
- Weighed materials or products to record data on tags or labels.
- Accurately measured and recorded product weight, dimensions or other production data for use in tag and label creation.
- Operated production machinery to ensure efficient manufacturing processes.
- Monitored equipment performance and conducted routine maintenance checks.
- Loaded raw materials into machines for production runs.
- Collaborated with team members to maintain workflow efficiency.
- Followed safety protocols to ensure a secure working environment.
- Inspected finished products for quality assurance and compliance standards.
- Adjusted machine settings based on production requirements and specifications.
- Documented production data and maintained accurate records of operations.
- Responsible for cleaning and maintaining work area in a safe, organized condition at all times.
- Trained new operators on the use of machinery and proper operating procedures according to company guidelines.
- Monitored and evaluated equipment operations to identify failures or malfunctions and troubleshoot issues accordingly.
- Collaborated with team members to troubleshoot any issues that arose during production runs.
- Adjusted machine settings according to product specifications.
- Operated equipment safely and in compliance with company policies and procedures.
- Assisted other employees in setting up machines for new production runs when needed.
- Prepared machines for operations by calibrating, adjusting, and testing control or settings.
- Identified defective parts during inspection process and reported them to supervisor immediately.
- Performed minor repairs on machinery as directed by supervisor or lead operator when needed.
- Organized workflow efficiently to meet customer deadlines while maintaining high quality standards.
- Operated production machinery to produce parts within specified tolerances and quality standards.
- Ensured proper functioning of automated systems by conducting tests prior to start-up operations.
- Maintained accurate records of production output and scrap rates in accordance with company policy.
- Loaded raw materials into machines, monitored the process, and unloaded finished products from machines.
- Inspected finished products for conformance to specifications using precision measuring instruments.
- Conducted daily checks of lubrication levels on all equipment used in production processes.
- Verified production orders prior to starting set-up.
- Prepared machine for production processes by equipping with required tools and parts.
- Documented daily production data and submitted accurate time logs to keep management up-to-date.
- Calibrated machines to adhere to quality standards and maintain required productivity levels.
- Looked through work orders to determine type and quantity of materials needed for each production batch.
- Classified defects from finished orders for record tracking and statistics.
- Attached identification labels to finished packaged items or stamped lot number and shipping destination information on containers.
- Measured and weighed items to meet quality standards and prevent waste.
- Separated products according to weight, grade and size of material to produce final product.
- Met or exceeded target for on-time customer shipments.
Animal Husbandry Technician
Rolling meadows
Jones
04.2013 - 11.2014
- Managed daily feeding schedules for various livestock at Rolling Meadows.
- Monitored animal health conditions and reported concerns to veterinary staff.
- Assisted with breeding programs to ensure genetic diversity and productivity.
- Cleaned and maintained animal housing facilities for optimal living conditions.
- Implemented biosecurity measures to prevent disease outbreaks among livestock.
- Trained new staff on proper animal handling techniques and safety protocols.
- Applied knowledge of animal husbandry to meet livestock needs and minimize disease risk.
- Provided guidance and mentoring to junior staff members.
- Observed animals for signs of illness or injury and reported any changes in health to veterinarians.
- Troubleshot equipment malfunctions promptly while adhering to safety protocols.
- Ensured compliance with all applicable laws regarding humane treatment of animals and safety regulations.
- Collaborated with other departments within the organization to ensure efficient operation.
- Assisted with animal husbandry procedures such as artificial insemination, vaccinations, deworming, hoof trimming, and castration.
- Monitored animal behavior closely to detect any abnormalities or changes in condition that may require medical attention.
- Assisted with euthanasia when necessary and properly disposed of carcasses according to regulations.
- Cleaned and disinfected kennels and common areas to reduce spread of illness from infected animals.
- Examined animals for injury or illness and documented symptoms for veterinarian review.
- Treated minor injuries and ailments, contacting veterinarians to obtain treatment for animals with serious illnesses or injuries.
- Monitored animal health, administered vaccines and injections and took detailed notes on progress against wellness, behavioral, and breeding goals.
- Observed animals in heat to detect approach of estrus and exercised animals to induce or hasten estrus if necessary.
- Injected females with prepared semen and biological samples for insemination.
Laborer/saw operator/die placement technician.
Postle Aluminum Co
Cassopolis
09.2012 - 11.2013
- Maintained a clean and organized work environment for safety compliance.
- Assisted in quality checks to ensure product standards were met.
- Loaded and unloaded materials for postal production processes.
- Collaborated with team members to streamline workflow operations.
- Operated extrusion machinery to produce postal materials efficiently.
- Followed safety protocols to minimize workplace hazards and injuries.
- Trained new employees on equipment operation and safety procedures.
- Performed physical activities requiring heavy lifting, walking and standing for long periods of time.
- Completed variety of physical labor tasks.
- Lifted objects weighing up to 50 pounds without assistance when necessary.
- Worked with team members to ensure efficient workflow throughout the day.
- Cleaned work area after job completion ensuring all debris is properly disposed of.
- Assisted with basic maintenance tasks such as sweeping, mopping, painting, and cleaning.
- Operated and maintained a variety of equipment including hand and power tools.
- Organized tools, supplies, and equipment needed for specific jobs according to instructions provided by supervisor.
- Met company and OSHA safety guidelines for work site operations to minimize worker risk.
- Performed repetitive assembly tasks with hand and power tools and automated equipment.
- Performed regular checks of equipment for proper operation and safety compliance.
- Prepared items for transportation installing bracing, padding and strapping to prevent damage.
- Lubricated and cleaned machinery and tools.
- Performed demanding physical work over extended periods and modeled positive attitude.
- Understood how to operate and maintain job site equipment safely and for maximum productivity.
- Operated equipment with strong focus on safety and ground communication.
- Lubricated, cleaned or repaired machinery or equipment.
- Learned and mastered skilled trade specialties under guidance of expert mentors.
- Operated saw machinery for precision cutting of extrusion materials.
- Maintained equipment to ensure optimal performance and safety compliance.
- Monitored production processes to identify and report any discrepancies.
- Collaborated with team members to streamline workflow efficiency.
- Conducted regular quality checks on finished products for specifications adherence.
- Trained new operators on safety protocols and equipment handling procedures.
- Assisted in inventory management of raw materials and finished goods.
- Implemented best practices for maintaining a clean and organized workspace.
- Measured, marked, and cut material with precision accuracy.
- Kept work areas clean, neat and free of safety hazards to maximize efficiency.
- Loaded and unloaded material onto the saw table.
- Cleaned up after each shift ensuring the work area was free of debris or hazards.
- Verified dimensions of finished workpieces, using measuring devices.
- Followed safety procedures while operating equipment and maintained a safe work environment.
- Operated a variety of saws to cut various materials according to specifications.
- Stacked cut pieces onto pallets for shipping or storage purposes.
- Assisted with loading and unloading shipments from delivery trucks using forklift or pallet jack.
- Selected and installed saw blades according to established safety measures.
- Mentored newly hired employees on machine operations and implemented training on safety procedures to prevent injuries.
- Monitored inventory levels of supplies needed for production runs.
- Tended machines during operation to monitor progress and adjust controls, maintaining optimal speeds and tension.
- Reported any discrepancies or issues related to quality or safety to supervisor immediately.
- Troubleshot machinery malfunctions quickly and efficiently.
- Adhered to all company policies regarding machine use and safety regulations.
- Reviewed production specifications to properly set up and calibrate machinery.
- Conducted inspections of equipment before, during and after shifts to prevent project delays and resolve issues.
- Utilized coaching and leadership principles to enhance internal and external team dynamics.
- Adjusted speeds on cutting machines to clear jams and keep equipment functional.
- Used hand tools to adjust bolts, clamps, stops and guides.
- Used appropriate tools to carefully clear machine jams.
- Lubricated and clean machines with grease guns or solvents.
- Operated extrusion machinery to produce high-quality postal materials.
- Maintained equipment and tools to ensure efficient production processes.
- Collaborated with team members to streamline workflow and reduce downtime.
Laborer/forklift operator/ assembler/ matenence.
Amerikart north
Cassopolis
08.2010 - 09.2012
- Operated heavy machinery to assist in daily warehouse operations.
- Collaborated with team members to maintain a clean and organized work environment.
- Loaded and unloaded materials from trucks for efficient inventory management.
- Followed safety protocols to ensure a secure workplace for all employees.
- Assisted in inventory checks to support accurate stock levels and product flow.
- Maintained tools and equipment for optimal performance during operations.
- Participated in training sessions to improve skills and operational knowledge.
- Communicated effectively with supervisors regarding workflow and task completion.
- Performed physical activities requiring heavy lifting, walking and standing for long periods of time.
- Completed variety of physical labor tasks.
- Lifted objects weighing up to 50 pounds without assistance when necessary.
- Worked with team members to ensure efficient workflow throughout the day.
- Cleaned work area after job completion ensuring all debris is properly disposed of.
- Contributed innovative ideas and solutions to enhance team performance and outcomes.
- Assisted with basic maintenance tasks such as sweeping, mopping, painting, and cleaning.
- Operated and maintained a variety of equipment including hand and power tools.
- Collaborated with team members to complete assigned tasks and meet tight deadlines.
- Organized tools, supplies, and equipment needed for specific jobs according to instructions provided by supervisor.
- Operated various power tools such as drills and saws safely while following manufacturer's instructions.
- Met company and OSHA safety guidelines for work site operations to minimize worker risk.
- Loaded and unloaded daily material shipments, keeping products organized and secure to prevent damage and optimize handling.
- Performed repetitive assembly tasks with hand and power tools and automated equipment.
- Transported heavy items from one location to another using hand trucks or carts.
- Lubricated and cleaned machinery and tools.
- Stacked and arranged products on pallets according to size and weight requirements.
- Inspected finished projects for quality assurance purposes before handing off to customer.
- Maintained accurate records of inventory levels and product locations in the warehouse.
- Performed demanding physical work over extended periods and modeled positive attitude.
- Understood how to operate and maintain job site equipment safely and for maximum productivity.
- Operated equipment with strong focus on safety and ground communication.
- Displayed high standards for quality workmanship and routinely double-checked work.
- Gained independent working skills and guided and mentored less experienced team members.
- Lubricated, cleaned or repaired machinery or equipment.
- Learned and mastered skilled trade specialties under guidance of expert mentors.
- Operated forklifts to transport materials across the warehouse efficiently.
- Conducted regular safety checks on equipment to ensure compliance with regulations.
- Loaded and unloaded shipments from trucks, maintaining proper inventory flow.
- Managed stock organization in the warehouse for optimal accessibility and order fulfillment.
- Collaborated with team members to coordinate material handling and logistics processes.
- Assisted in training new operators on safe forklift operation procedures and practices.
- Monitored inventory levels and reported discrepancies to the warehouse supervisor promptly.
- Followed safety protocols to minimize risks while operating heavy machinery daily.
- Loaded pallets onto trailers for shipment.
- Moved freight, stock and other materials to and from storage and production areas and loading docks.
- Maneuvered forklift over and around loaded pallets, boxes and other materials.
- Ensured safety procedures were followed when operating forklifts.
- Maintained current forklift training and certification as required by company policies.
- Performed daily maintenance checks on forklifts to ensure optimal performance.
- Transported material to correct locations and documented inventory changes.
- Communicated with supervisor and other warehouse staff to coordinate work.
- Assisted in the loading and unloading of goods from trucks, containers and railcars using forklift.
- Followed standard work instructions accurately when picking, sorting, staging and scanning products.
- Packaged, labeled and tagged goods before transfer.
- Used handheld scanners for warehouse management system compliance.
- Reported safety and quality issues to management.
- Organized warehouse shelves and racks for efficient retrieval during order fulfillment process.
- Utilized RF scanner technology while moving stock within facility in order to maintain accurate inventory levels.
- Monitored warehouse aisles to prevent collisions with pedestrians or other equipment.
- Inspected loads prior to lifting to determine weight distribution and stability.
- Picked up warehouse debris and deposited waste into appropriate piles and stacked baled trash.
- Kept record of daily activities such as number of items moved or handled throughout the day.
- Collaborated with team members on various tasks related to storage and transport operations.
- Maintained yard appearance, keeping ground clean and clear.
- Maintained accurate records of all inventory movements including deliveries, receipts and shipments.
- Tracked materials moved for stocking purposes and to complete logs for management.
- Loaded and unloaded goods from vehicles, ensuring secure and damage-free handling.
- Moved levers or controls of lifting devices to load, unload or stack material.
- Positioned lifting devices around loaded pallets, skids and boxes to secure materials for transport to designated areas.
- Drove gasoline- or electric-powered vehicles to transport materials between loading, processing and storage areas.
- Estimated weights, heights, and centers of balance to make precise placements.
- Inspected product load for accuracy to foster timely and complete delivery.
- Weighed materials or products to record data on tags or labels.
- Employed hand signals to communicate effectively with coworkers operating transport vehicles and direct movements from floor.
- Accurately measured and recorded product weight, dimensions or other production data for use in tag and label creation.
- Noted and recorded receipt of materials on drivers' paperwork.
- Followed safe practices to mix and apply chemicals.
- Assembled products according to detailed specifications and quality standards.
- Operated hand tools and machinery to complete assembly tasks efficiently.
- Collaborated with team members to ensure timely production schedules were met.
- Inspected finished products for defects and ensured adherence to safety protocols.
- Maintained a clean and organized workspace to promote safety and efficiency.
- Assisted in training new assemblers on equipment and assembly techniques.
- Followed written instructions for assembly processes accurately and consistently.
- Reported equipment malfunctions to supervisors for timely repairs and maintenance.
- Maintain a clean work area by sweeping up debris from assembly operations.
- Assemble components according to specifications using hand tools, power tools, and other equipment.
- Follow established assembly methods and procedures to ensure product quality standards are met.
- Inspect finished products for defects and conformance to customer requirements.
- Align components for proper fit and adjust as necessary during the assembly process.
- Completed accurate assembly work by positioning and aligning components.
- Collaborate with team members to optimize workflow processes within the department.
- Test assembled products for accuracy and functionality prior to final packaging.
- Set up and performed hand and automatic assembly operations on components, sub-assemblies and assemblies.
- Identify problems that may affect product quality and take corrective action when required.
- Notify supervisors of any potential issues that may cause delays in production schedules.
- Operate machines such as drill presses and saws to cut or shape parts during assembly.
- Position parts in jigs or fixtures for fastening with bolts, screws, rivets, or other fasteners.
- Adhere strictly to health and safety regulations while carrying out daily tasks.
- Assist in training new employees on proper safety procedures while operating machinery.
- Record production data such as number of units produced, rejected items.
- Sorted and placed materials or items on racks, shelves or in bins according to predetermined sequence.
- Maintain accurate inventory records of all materials used in the manufacturing process.
- Used templates and drawings to complete product according to specifications.
- Monitor stock levels of raw materials needed for upcoming production runs.
- Monitored processes, reporting abnormalities to management team.
- Provide feedback on design changes that could improve efficiency of the production line.
- Operated and maintained equipment in a clean and safe condition.
- Packed finished products for shipment and prepared them according to shipping specifications.
- Sorted, graded, weighed, and inspected products, verifying and adjusting product weight or measurement to meet specifications.
- Cleaned and lubricated parts, equipment, and machinery.
- Identified and resolved assembly and production issues or malfunctions.
- Assembled and completed products according to production schedules.
- Recorded and reported product damages and malfunctions for supervisor review.
- Assembled complex components after careful review of project specifications and directions.
- Retrieved correct materials from product inventory to perform various fabrication duties.
- Powered up, calibrated and shut down fabricating machinery according to company regulations.
- Utilized furnaces and other heating equipment to weld, shape and fuse materials.
CNC Machine Operator/ machinist
Cassy tool&die
Dowagiac
05.2002 - 07.2006
- Operated CNC machines to produce precision parts according to specifications.
- Monitored machine performance and made adjustments for optimal operation.
- Conducted routine maintenance on equipment to ensure reliability and safety.
- Interpreted blueprints and technical drawings for accurate machining tasks.
- Collaborated with team members to troubleshoot production issues effectively.
- Maintained a clean and organized work area to promote safety standards.
- Assisted in training new operators on machine setups and operations.
- Documented production logs and maintained records of machine use and maintenance.
- Maintained quality control by inspecting parts for conformance to specifications, using precision measuring instruments.
- Achieved safety, quality, and performance standards to meet production schedules.
- Operated multiple CNC machines simultaneously while adhering to safety protocols at all times.
- Set up and operated CNC machines to perform repetitive machining operations on a variety of materials according to specifications.
- Kept parts within close tolerances of design standards to maintain optimal quality.
- Verified settings by measuring positions, first-run parts and sample works with micrometers, calipers or other measuring instruments.
- Set controls to regulate speed, feed and coolant flow.
- Adjusted machine feed and speed, changed cutting tools, adjusted machine controls as necessary during the run cycle.
- Changed out aging tools, fixtures and offsets.
- Performed regular preventive maintenance tasks on CNC machinery.
- Loaded and unloaded machines to prevent expensive equipment issues.
- Loaded raw materials into production equipment according to job orders while maintaining proper inventory levels.
- Performed minor maintenance such as cleaning and lubricating machines.
- Monitored machine operation to detect malfunctions or out-of-tolerance machining.
- Monitored and adjusted processes or equipment to improve quality and productivity.
- Observed company's strict safety rules during each shift to avoid job-related injuries.
- Set-up and operated lathes, mills and grinders to cut raw materials.
- Read and interpreted blueprints, sketches, drawings, manuals, specifications or sample parts to determine dimensions and tolerances of finished work piece.
- Interfaced with machines to adjust settings or tools, driving high-quality production.
- Worked with supervisor to debug and develop production processes and learn machine set-up skills.
- Maintained production tooling by replacing and grinding worn tools.
- Troubleshot issues related to tooling or programming errors using problem solving techniques.
- Ensured that all components met customer requirements before being packaged for shipment.
- Worked from layout and work order, created programs and set up machines to produce required parts.
- Used devices, templates and fixtures to measure dimensions of finished workpieces for conformance.
- Provided expert coaching and training for new team members.
- Fabricated various parts using multiple machines at once.
- Compared numerical displays with process sheet data to verify dimensional adjustments.
- Checked accuracy of programs prior to running production runs utilizing simulation software packages.
- Provided feedback on product design changes based on experience operating the machinery.
- Analyzed engineering designs and determined most efficient sequence of operations.
- Collaborated with engineers in order to create new processes for improved efficiency.
- Maintained, adjusted, and calibrated control systems and equipment to ensure optimal performance.
- Loaded feed mechanisms by lifting stock into position.
- Documented actions by completing production and quality logs.
- Verified settings by measuring positions, first-run part, and sample workpieces, adhering to international standards.
- Adjusted machine feed and speed, changed cutting tools, or adjusted machine controls when automatic programming is faulty or if machines malfunction.
- Trained new employees on CNC machine operation, safety procedures, and company policies.
- Identified opportunities for process improvement and increased efficiency.
- Reviewed and interpreted electronic or written blueprints or specifications to understand the job requirements.
- Coordinated with other team members and departments to ensure timely completion of parts and projects.
- Selected the appropriate tools, machines, and materials to be used in preparation of machinery work.
- Maintained specifications by observing drilling, grooving, and cutting, including turning, facing, knurling, and thread chasing operations.
- Took measurements, detected malfunctions, troubleshot processes and adjusted and reprogrammed controls while adhering to quality assurance procedures and processes.
- Managed the inventory of tools and parts necessary for machine operation and maintenance.
- Controlled machine operations to complete precise, high-quality work.
- Stopped machine operation to change tooling, setup, or workpiece placement according to required machining sequences.
- Checked completed workpieces against specifications to assess conformance.
- Aligned, mounted and installed tools and attachments on machines, using hand tools and precision measuring instruments.
- Completed accurate calculations of machine speed, feed ratios and cut parameters.
- Read programming instructions and product blueprints to determine sequences and dimensional requirements.
- Followed optimum cleaning procedures to keep machines, tooling and parts free of build-up and avoid excess wear.
- Operated hoists, cranes and other material handling equipment to lift heavy work pieces or move loads.
- Verified proper cooling and lubrication of workpieces during machine operation.
- Developed solutions to wide range of complex technical problems to meet organizational objectives and deadlines.
- Operated CNC machines to produce precision parts for various tools.
- Interpreted technical drawings and specifications for accurate machining processes.
- Maintained equipment by performing routine inspections and minor repairs.
- Selected appropriate materials based on project requirements and specifications.
- Collaborated with team members to optimize workflow and enhance production efficiency.
- Followed safety protocols to ensure a safe working environment at all times.
- Assisted in training new employees on machine operation and safety practices.
- Conducted quality checks to ensure compliance with industry standards and specifications.
- Performed routine maintenance on machinery, including lubrication, cleaning.
- Read blueprints, sketches, drawings, manuals, specifications or sample part to determine dimensions and tolerance of finished work piece.
- Changed worn cutting tools as needed during operation.
- Adjusted machine feed and speed, changed cutting tools, or adjusted machine controls when automatic programming was faulty or if machines malfunctioned.
- Followed written instructions to set up and operate manual equipment and computer-controlled production machines.
- Calculated dimensions and tolerances using knowledge of mathematics and instruments such as micrometers or vernier calipers.
- Set up and operated various machine tools to produce precision parts and instruments.
- Monitored production output levels and made adjustments as necessary to maintain production goals.
- Drilled holes in parts using drill presses.
- Measured and marked dimensions and reference points to meet precise specifications.
- Operated hand tools, drill presses, riveting machines and tap burners to safely produce projects.
- Fabricated tools, jigs and fixtures to meet manufacturing and engineering needs.
- Verified conformance of finished work piece to specifications by checking measurements with a variety of precision measuring instruments such as height gauges, surface plates and protractors.
- Trained new employees in the use of machinery used in the manufacturing process.
- Operated forklift to place finished products on skids and transport to warehouse.
- Calibrated machinery to optimize performance according to prescribed standards and specific project needs.
- Observed machine operations to detect malfunctions or out-of-tolerance machining and adjust machines accordingly.
- Constructed appropriate offset corrections for tool wear, broken tools, and casting variations.
- Selected appropriate speeds and feeds according to metal type and finish specifications.
- Maintained quality and safety standards; kept records of maintenance and repair work.
- Operated manual lathes to turn down shafts and cut threads into them.
- Maintained logs, lists and files and promptly completed necessary paperwork.
- Used grinding equipment for finishing surfaces and sharpening cutting edges on machined parts.
- Sharpened, replaced and tracked cutting tools to adhere to strict quality control and usage schedules.
- Aligned components for assembly according to blueprint specifications using measuring instruments such as calipers or dial indicators.
- Sustained lockout and tag-out safety protocols by properly using equipment and materials.
- Kept accurate records regarding production numbers and any repairs performed on machinery.
- Gauged and maintained tolerances on grinding diameters, depths, squareness and parallelism.
- Trained, directed and instructed apprentices and helpers to increase production levels and meet established goals.
- Supervised other workers engaged in operating machines and making repairs on machinery.
- Incorporated new preventive and corrective maintenance processes to increase equipment lifespan.
- Inspected material after completion for accurate measurements of dimensions.
- Separated scrap waste and related materials for reuse or recycling.
- Aligned and secured holding fixtures, cutting tools and attachments onto machines.
- Tested experimental models under simulated operating conditions to determine standardization and feasibility of design.
Education
Bradford County Highschool
Starke, FLSkills
- Equipment operation
- Safety compliance
- Blueprint interpretation
- Tool maintenance
- Concrete pouring
- Team collaboration
- Project coordination
- Inventory management
- Quality assurance
- Production efficiency
- Problem solving
- Effective communication
- Time management
- Conflict resolution
- Leadership training
- Dependability and reliability
- Yard maintenance
- Manual dexterity
- Window installation
- Flooring installation
- Team-oriented and dependable
- Caulk application
- Worksite safety
- Masonry work
- Basic carpentry
- OSHA regulations
- Warehouse operations
- Site cleaning
- Fixture installation
- Demolition procedures
- Blueprint reading
- Basic math
- Framing techniques
- Nail gun proficiency
- Forklift operation
- Insulation application
- Worksite organization
- Concrete finishing
- Safety monitoring
- Ditch digging
- Skilled with ladders and scaffolds
- Electrical wiring
- Formwork construction
- Construction site project life-cycle
- Retention wall construction
- Drywall installation
- Roof installation
- Scaffolding setup
- Waterproofing methods
- OSHA compliance
- Supply coordination
- Equipment maintenance
- Carpentry abilities
- Landscaping
- Stucco application
- Earth grading
- Painting techniques
- Heavy lifting
- Construction safety
- Plumbing basics
- Excavation techniques
- Surveying fundamentals
- Team lifting
- Problem-solving
- Tool management
- Physical stamina
- Multitasking and organization
- Attention to detail
- Concrete pouring techniques
- Fiberglass cutting
- Tile setting
- Power tool operation
- Rebar installation
- Site preparation
- Carpentry expertise
Languages
English
Native/ Bilingual
ASL
Limited
Certification
Osha 10.
Past forklift operator certification.
References
References available upon request.
Timeline
Machinist/Quality Control Technician
Flexable consepts
04.2025 - 03.2026
Laborer/ repair technician.
Forest river
02.2022 - 05.2024
Repair technician/ midline quality control
Thor motor coach rv.
03.2021 - 02.2022
Machinist/General Laborer
Arch Global Services
05.2020 - 02.2021
Laborer/ forklift operator/Production Machine Operator
National Standard
10.2015 - 01.2019
Animal Husbandry Technician
Rolling meadows
04.2013 - 11.2014
Laborer/saw operator/die placement technician.
Postle Aluminum Co
09.2012 - 11.2013
Laborer/forklift operator/ assembler/ matenence.
Amerikart north
08.2010 - 09.2012
CNC Machine Operator/ machinist
Cassy tool&die
05.2002 - 07.2006
Construction laborer/Journeyman Carpenter
Buskirk Construction
10.1993 - 04.2026
Bradford County Highschool