Mohith Tanangi

Project name: IVF incubator Mechanical design and POC build

Role : Technical Lead Mechanical

•Study the concept of CO2 incubator, Prepare the critical NUD (temperature, Humidity, GAS mixing)

• Defined & validated the NUD parameter based on calculations and test data

• Created PRD based on the spec and customer requirement.

• Created product layout with cross functional team.

• Designed GAS mixing chamber, Reheating system and chambers design with tested and calculated data

• Made a prototypes of subsystem and verified performance of each subsystem with PRD.

• Final Prototype is in progress

Project name: TEM microscope Cost out Idea gen (VAVE)

Role: Technical Lead Mechanical.

• Studied the product and digital tear down of the Base structure and vacuum system.

• Categories the components based on the Function, make and M/P.

• Created functional body diagram and list the high cost items with pareto charts.

• Performed Idea gen based on part standardization, parts integration, simplifying the design and low cost alternates.

• Listed the ideas and raw savings of 500M USD and net savings of 420M USD with an EAU of 130 Units.

Project name: Mechanical Design for Portable 1Lt & 5 Lt Single Use Bioreactor NPD
Role: Technical Lead Mechanical..
• Creating Concepts of the portable 1 lt single use bioreactor casing, Impeller and Ports as per inputs
• Multiple concept creation of the impeller design to for testing and validation of the performance.
• Designed different Sparges as per the flow calculations and performed the testing to validate.
• Created the concepts for placing Self-opening rubber valve at the drain ports and performed testing to validate the results.
• Updating the outer casing compatible for the injection molding.

Project name: Klondike A & B NPD Web Gauge Mechanical Design Support.
Role: Technical Lead Mechanical Engineering.
• Designed and developed the concept based on input form sensor and electronics team
• Designed source and detector mounting to have a full width scanning and to mount different sources and diode boards in detector.
• Designed the parts as per the PRD and validated structural integrity for Vacuum Shroud.
• Preformed thermal analysis to define the internal heat generated by photo diode boards.
• Completed Frame design with required footprint and send all the drawings for prototype manufacturing.

Project name: Single use technology products Sustenance engineering

Role: Sr Mechanical Design engineer.

• Reviewing the ECO and changes required on the model’s drawings.

• Creating the list of effected parts, Sub-assemblies, and Assemblies.

• Create the Instruction document for the Changes.

• Assign the list to the team for making the updates on Models and Drawings.

• Update the Specification sheets for the effected parts in Master Control.

• Review the Models and drawings for a quality check, Submit them for approval.

Project name: Cyclone PM 2.5 Reverse engineering & prototyping
Role: Sr Mechanical Design engineer.
• Analyzing physical sample and approached to metrology plan to measure.
• Submitted for metrology inspection CT scanning & CMM and material, surface finish testing.
• Created 3D & 2D CAD from the inspection reports, defined material and finish from the test reports.
• Added GD&T to the drawings.
• Submitted drawings for prototype manufacturing and performed FAI of prototype.
• Submitted the prototypes for performance and field testing, passed all tests

• Created and drafted assemblies, sub assemblies, sheet metal, tubing, plastic parts, Electrical wiring, instruction documents etc.
• Worked on the RoHS compliance project for the mechanical and electromechanical parts evaluation for #8000+
• Generated concepts to satisfy project requirements.
• Created presentations to capture the design changes/simulation reports.
• Involved in meeting with suppliers, clients and project stakeholders to review designs.

• Worked as Production in charge for Blow molding and injection molding machines.
• Keeping track of the Production requirements, mold maintenance and Inline quality inspection of the items.