MUHAMMED ANZARI T
Dammam
Summary
Driven by results, I excelled at SAIPEM SAUDI ARABIA, enhancing equipment reliability through expert hydraulic troubleshooting and preventive maintenance, reducing downtime significantly. My collaborative skills, paired with maintenance expertise, ensured the timely completion of projects, showcasing my ability to lead and innovate in high-pressure environments.
Overview
8
8
years of professional experience
Work History
Junior Chief Mechanic
KCA Deutag
2023.09 - Current
- Equipment received for any job shall come through work order and check those issues or problems mentioned by the end user and function test prior to start job, then come to conclusion to order the parts required.
- Preparing part list for Equipment received for repair.
- Follow preventive maintenance plan also on all hydraulic equipment as per OEM/ Company recommendation.
- OEM new modification required shall be done at the same time with together with job.
- Handling various types of Top drive (drilling tool) such as Canrig, National oilwell varco, LTI. Received from rig periodically for MPI or yearly inspection as per PMP.
- Handling various Hydraulic power units, use for Top drive Canrig, drawwork, Iron Roughneck Assy and Rig up special job,
- Handling various types of Iron Roughneck (Tubular handling tools for Break out and Makeup job) such as NOV- (Model: ST80C, 3080), FORUM, BLOHM AND VOSS.
- Handling Various Brake Caliper (COREMO, SVENDBORG BRAKES, National oilwell) for Drawwork, pressure test prior to dismantle to see if hold OEM set pressure otherwise spring to replace to function properly.
- Handling Torcup Air pump, use for tightening and loosen BOP bolt while installation and removal.
Hydraulic Mechanic
Saudi International Energy Service Limited
2022.08 - 2023.08
- Repair/ Assemble, Pressure and function test hydraulic cylinders as per drawing schematic.
- Pressure and function test hydraulic brake caliper(parking/ service) as per drawing and repair or replace spring and seals if there is any drop in pressure.
- Dismantling and Assembly of hydraulic equipment's.
- Prepare/ Assemble spare Iron roughneck gear box ready and function test for emergency.
- Prepare/ Assemble spare backup wrench/ pipe handler ready for top drive and pressure test.
- Prepare/ Assemble Brake Actuator ready and pressure test.
- Routine maintenance activities.
Assistance Maintenance
Saipem
2019.03 - 2022.07
- Handling Rig hydraulic Equipment inspection and repair.
- Assisting Great team players in order to complete overhaul job on time.
- Reduced equipment downtime by proactively identifying potential issues through regular inspections and preventive maintenance.
- Collaborated with team members to complete large-scale projects, ensuring smooth operations for clients.
- Mitigated potential repair complications with thorough pre-assessment of damaged equipment, identifying root cause of malfunction before proceeding with repairs.
Maintenance and Warehouse Supervisor
Saipem
2017.02 - 2019.02
- Planning and Monitoring execution of preventive maintenance program (PMP) activities of all Asset or equipment's such as Engine, Drawwork, Mudpump, BOP Accumulator, Top drive, Iron roughneck, Bop handling hoist, HPU, various pumps and agitators etc on rig site.
- Maintain AMOS/ CITRIX system suited for planning Equipment periodic/ unplanned service and warehouse activities at drilling and work over rig site Aramco.
- Prepare and maintain records pertinent to PMP.
- Rig site warehouse management and Material requisition creation in accordance with company procedures in order to provide maximum information.
- Proper communication with procurement team for clarification of material required that was requested by end user.
- Keeping and monitoring records while issuing any material from warehouse for periodic maintenance or unplanned job.
- Organize, maintain inventory and storage area.
- Prepare Monthly Maintenance report carried out with Client approval and knowledge and submit to Management.
Education
Bachelor of Science - Mechanical Engineering
Nehru College of Engineering & Research Centre
Ottappalam, India04.2016
Skills
- Pressure testing
- Equipment Calibration
- Hydraulic Troubleshooting
- Hydraulic Schematics
- Maintenance expertise
- Preparing Maintenance reports
- Overhauling systems
- Preventive Maintenance
- Hydraulic Component Assembly
- Preventive maintenance procedures
- MS office
- Citrix Software
Accomplishments
- Fix leak issue with Topdrive Canrig (Model: 1250AC-681) Quill shaft in the rigfield operation under urgency and completed the task with accuracy and efficiency
- Troubleshoot hydraulic pressure drops/ issues in link tilt cylinders Topdrive Canrig under emergency and successfully completed
- Troubleshoot Hydraulic Torcup Air pump on emergency in our workshop base and set pressure as per rig / operation requirement.
- Troubleshoot Hydraulic Power Unit heating issues and set pump pressure and adjust pressure relief accordingly in the field rig operation under emergency.
- Fix or Troubleshoot pressure drop in the manifold hydraulic(NOV Topdrive 11 SH) due to variable displacement pump malfunction and then replaced succesfully.
Timeline
Junior Chief Mechanic
KCA Deutag
2023.09 - Current
Hydraulic Mechanic
Saudi International Energy Service Limited
2022.08 - 2023.08
Assistance Maintenance
Saipem
2019.03 - 2022.07
Maintenance and Warehouse Supervisor
Saipem
2017.02 - 2019.02
Bachelor of Science - Mechanical Engineering
Nehru College of Engineering & Research Centre
Similar Profiles
NAMIG ALIYEVNAMIG ALIYEV
Systems Engineer / Senior Electrician at Turan Drilling & Engineering Company (KCA DEUTAG)Systems Engineer / Senior Electrician at Turan Drilling & Engineering Company (KCA DEUTAG)
Olga FalkovaOlga Falkova
Finance Controller at KCA Deutag Drilling GmbhFinance Controller at KCA Deutag Drilling Gmbh
Kamel Mohammed AldubayniKamel Mohammed Aldubayni
RESTBOOT at KCARESTBOOT at KCA