Nisar Ahmed
Senior QA/QC Engineer
Riyadh
Summary
Results-driven professional with a verifiable track record of 20 years targeting assignments as QA/QC Engineer specialized in Painting, piping, and Mechanical equipment with an organization of repute preferably in Kingdom of Saudi Arabia.
Overview
20
20
years of professional experience
6
6
Languages
Work History
Senior Quality Control Engineer
National Company for Medical Furniture & Metal Industries
08.2024 - Current
- Preparing Material Inspection Reports (MIR) for received materials from the factory.
- Maintaining MIR log sheets and documentation records up to date.
- Raising Non-Conformance Reports (NCR) for materials not complying with project requirements and following up with concerned departments to close pending NCRs.
- Coordinating with all concerned departments regarding Hollow Metal Doors and Frames.
- Reviewing DXF/Cutting List drawings before release to production via email.
- Conducting in-process internal inspections at the factory.
- Providing internal training to the installation team.
- Submitting MIR documents for inspections.
- Conducting final inspections alongside SPML and WME teams at Site Exit-10.
- Resolving installation issues in critical areas.
- Maintaining all approved drawings with codes 'B' and 'C' for records.
- Sending weekly site progress reports to the concerned departments.
- Sending Project Daily Quality Report.
- Preparing Work Inspection Reports (WIR) for the installation of Hollow Metal Doors with Frame and Metal Frames for Wooden Doors.
- Maintaining WIR log sheets and documentation records up to date.
- Raising Non-Conformance Reports (NCR) for work not complying with project requirements and following up with concerned departments for closure.
- Coordinating with departments regarding Hollow Metal Doors and Frames.
- Conducting internal inspections before offering work for official inspection.
- Providing internal training to the installation team.
- Submitting WIR documents for inspections.
- Conducting final inspections with SPML and WME teams at Site Exit-10.
- Resolving installation issues in critical areas.
- Mfg. of Metal Doors. Windows & Structural Products.
Quality Control Engineer
Al Kuhaimi Metal Ind LTD
05.2013 - 04.2021
- Report to the Division Director, QC Manager & Project Head for the project preparation & propose as required.
- Reviewing of Mechanical specifications, drawing, details, and standards in accordance with the proper procedure.
- Prepare an inspection package such as Inspection and Test Plan (ITP), Certificate of Conformity, Paint Inspection Report, Dimensional Report, Welding Inspection Report & QA/QC Clearance.
- ISO 9001:2008 & 2015 Internal Quality Auditor (certified), implementing & conducting internal ISO audits.
- Inspection of raw materials, Special Doors, Hollow Metal Doors, Roll – up Doors, Gates, Windows & frames in accordance with Quality Standards for all in – process stages.
- Preparation of Daily Quality Inspection Reports & Document actions reports (CPAR/NCR).
- Customer complaint Investigation & propose solution as needed & corrective actions.
- To read & understand the Welding requirements as per weld maps & sketches welding procedure standard.
- To ensure the use of welding rods by welders verify sizes of welds in accordance with WPS & verify the calibration records of welding machines.
- Coordinate with Director, QC Manager & Production Manager for performing in all stage of product inspection.
- CNC programs verification and testing of samples.
- Mfg. of Metal Doors. Windows & Structural Products.
PIPING QA/QC
DAELIM SAUDI ARABIA
06.2012 - 04.2013
- Responsible for the entire piping inspection at site and in the fabrication shop during fabrication.
- Reviewing Line history sheet and ensure that all required NDE examination shall be performed prior to final system hydro testing unless otherwise specified by engineering.
- Ensure satisfactory identification of materials, proper protection of piping and fittings. Verify proper size and schedule of pipe, rating of flanges, proper flange face and fittings.
- Inspect piping just before erection to verify that interior is clear of foreign materials. Check edge preparation and fit ups to verify that areas to be welded are free of contaminants.
- Check flow direction arrows on valves; verify that the properly identified valves are installed in accordance with the flow diagram.
- Ensure correction or completion of punch list items. Verify preparation of piping test package including piping test record.
- Check and assure that all joints are exposed for examination during pressure test. Ensure that isolation or disconnection of equipment not to be tested. Check vents are open when filling and draining lines.
- Witness final pressure tests, including verification that pressure gauges have adequate dial range and is calibrated.
- Verify that the testing pressure does not exceed the allowable test pressure of any equipment in the system.
- Verify that the required test pressure was maintained for the specified length of time with no acceptable leakage.
- Confirm the piping system concurs with flow diagrams to verify completeness of system.
- Evaluation of test package contents, lines checking against drawing requirements to ensure completeness and accuracy of the piping system.
- Confirm repairs, re-testing, and re-inspection in accordance with specifications.
- Ensure blinds are removed and correct gaskets are installed.
- Performed audit of sub-contractors according to the project requirement.
- Working independently by following all company safety procedures and regulations.
- Check the quality of material and workmanship and responsible for safety of tools and men.
- Witnessing and monitoring the required NDE has been covered as per the project specification.
- Monitoring the QA/QC Documentation of the subcontractors and ensure that all the activities are incorporated to their system on daily basis and can be traced according to our requirements and reviewing radiographic films.
- Co-ordination with NDT contractor, painting & Insulation contractor.
- Witness final pressure tests, including verification that pressure gauges have adequate dial range and is calibrated.
- Visual Inspection of equipment / pipe spools etc, prior to installation at site and at Vendors premises.
- Hydro test package review prior to testing and submitting to client for approval.
- LDPE Saudi Kayan Project.
Mechanical Engineer
Surana Industries Ltd.
05.2006 - 04.2012
- Maintenance of rotating kiln and cooler.
- Maintenance of GCT and ABC pumps.
- Maintenance Hot well And Cold well pumps.
- Maintenance of Vibrating Screen, Magnetic Separators and Crushers.
- Monitoring waste gas handling system involving Electrostatic Precipitators, Gas Conditioning Towers, After Burning Chambers and De-dusting systems like Bag filters.
- Maintenance of Air Compressors, Pumps, Cooling Towers and Belt Conveyors.
- Maintenance of Shell air Fans and ID Fans.
- Integrated steel plant
Education
Mechanical Engineering -
Diploma in Powder Coating Training - undefined
Jotun
Internal Audit Training Course - ISO 9001:2015
Awareness Training Course - ISO 9001:2015, ISO 14001:2015 EMS, ISO 45001:2018 OHSMS
Diploma in MS Office - MS Word, Excel
Auto CAD Training - undefined
01.2015
Skills
leadership
vendor registration
research and development
testing and commissioning
in-process inspection
team building
coordination
Microsoft Word
Microsoft Excel
Microsoft PowerPoint
AutoCAD
ERP
Baan
Additional Information
- Collaboration & Leadership,
- Innovation & Communication
- Discipline, Focus & Resilience,
- Problem-Solving & Strategic Thinking,
- Language skills help in international expansion / serving,
- Standardized scale,
- Improve certifications as per project requirements, Etc.,
Timeline
Senior Quality Control Engineer
National Company for Medical Furniture & Metal Industries
08.2024 - Current
Quality Control Engineer
Al Kuhaimi Metal Ind LTD
05.2013 - 04.2021
PIPING QA/QC
DAELIM SAUDI ARABIA
06.2012 - 04.2013
Mechanical Engineer
Surana Industries Ltd.
05.2006 - 04.2012
Diploma in Powder Coating Training - undefined
Jotun
Internal Audit Training Course - ISO 9001:2015
Awareness Training Course - ISO 9001:2015, ISO 14001:2015 EMS, ISO 45001:2018 OHSMS
Diploma in MS Office - MS Word, Excel
Auto CAD Training - undefined
Mechanical Engineering -
Personal Information
- Passport Number: P7149064
- Nationality: Indian
- Driving License: Available
- Marital Status: Married
- ID Type: Passport
- ID Number: P7149064
Professional References
Available upon request
Driving License Ksa
Available
swimming, driving, hunting new places for my family business and etc.
Stress-relieving activities