Summary
Overview
Work History
Education
Skills
Disclaimer
Timeline
Generic

Pradip Ramesh Patil

Senior Design Engineer
Pune

Summary

Dynamic engineering professional with over 7 years of experience in designing innovative automotive parts, specializing in interior and exterior trims. Proven expertise in translating complex design concepts into functional, high-quality products that enhance user experience and meet industry standards. Seeking a design engineering position to leverage technical skills and creativity in developing cutting-edge automotive solutions. Committed to driving efficiency and excellence in every project.

Overview

2026
2026
years of professional experience
6040
6040
years of post-secondary education
4
4
Languages

Work History

Senior Design Engineer

TATA TECHNOLOGIES
03.2023 - Current
  • Program Name: TATA HARRIER EV
  • Description: Exterior Trims like Front Bumper and Rear Wheel arch Liner and Underbody guard.
  • CAD Software: CATIA_V5



  • Program Name: TATA AVINYA EV
  • Description: Soft trim area like Trunk area luggege area
  • CAD Software: CATIA_V5



  • Program Name: TATA TIAGO-MCE2
  • Description: Interior Trims like Top Panel,End Cover LH/RH, DLP, Start/Stop Button.
  • CAD Software: CATIA_V5


Design Engineer

EDAG Engineering, Germany (roll of IWOVS)
09.2021 - 02.2023
  • Program Name: VW ID Buzz 2.0
  • Part Description: Door and Side Trims, Foot Step, Floor
  • CAD Software: CATIA_V5
  • Responsibilities:
  • Style analysis like tooling feasibility checking like draft and curvature analysis.
  • Making style proposal as per functional requirement.
  • Close volume as per part thickness.
  • Adding B side feature like Retainer clip, snapping clip, Welding cylinders and snaps
  • Draft analysis of plastic parts considering main tooling, sliders and lifters.
  • Creating parting line according to tool direction.
  • Part assembly considering by RPS (3-2-1) principle.
  • Awareness about Design for Manufacturing (DFM) and Design for Assembly (DFA).
  • Maintaining LOP for day to day project work.

Design Engineer

IWOVS India Pvt Ltd.(roll of APPL)
02.2021 - 09.2021
  • Program Name: VW_216 IP
  • Description: Dekorblende BFS and FS, Dekorblende Chrome FS and BFS, Dekorblende FS and BFS Innen.
  • CAD Software: CATIA_V5
  • Responsibilities:
  • Customer provided the Master Section of whole IP Assembly and style surface.
  • Check the all input data with environment, as well as checking the Draft analysis with the main tool direction.
  • Making the close volume of input style as per section.
  • Mounting the parametric feature as per providing master section and considering RPS.
  • Add the locator for locating and flange in part body.
  • Provided the sliders and lifters for removing the undercut.
  • Provide the solution for sink mark.
  • Preparing different proposals for adding mounting and locating feature.
  • Draft analysis of the part in MTD, Slider and Lifter.
  • Create the parting line as per tooling.
  • Clash analysis between internal part as well as environment part.
  • Maintaining SLI (single list of issues) for day to day activities of project work.

Cad Engineer

Autoone Engineering Services Pvt, Ltd.
10.2017 - 02.2021
  • Software: Catia_V5
  • In Autoone, payroll worked for Varroc, Faurecia, and some in-house projects.
  • All project details are mentioned in the column below.

Lumax Industries Ltd. (In-house project in Autoone)
  • Program Name: MAHINDRA Z101 LAMPS
  • Description: Rear Lamp Chrome, PCB Bracket, Inner Lens Upper, Head Lamp Bezel and Eyebrow.
  • CAD Software: CATIA_V5
  • Responsibilities:
  • Worked for drawing creation for lamp parts.
  • Preparing list of information to add in a drawing from given reference drawings.
  • Preparing and filling checklist during drawing creation.
  • Prepared drawing of different components mentioned above.
  • Received appreciation from customer for the quality of the drawings.

CAD Engineer

SMRC (In-house Project in Autoone)
  • Program Name: PSA SCX IP
  • Description: Driver and Passenger side bezels, Upper and Lower Shrouds.
  • CAD Software: CATIA_V5
  • Responsibilities:
  • Worked for cycle starts from receiving style surface, style maturation, CAD maturation and Final data release.
  • Preparing feasible sections from received concept sections considering environment data and style surfaces.
  • Preparing sections adding information about mounting feature, locating features, features to maintain gap and flush, strengthening ribs and different features to avoid sink marks.
  • Have discussed different proposal with inhouse tooling expert for the tooling issues in Driver and Passenger Bezels and Upper and Lower Shrouds.
  • Have done different analysis like style analysis, draft analysis, assembly analysis, clash and clearance analysis.

Faurecia Interior System India Pvt. Ltd. Pune (Onsite) (roll of Autoone)
  • Program Name: RSA XFK IP
  • Description: Driver Lower Panel, Switch Support. End Cover, Upper and Lower Shroud.
  • CAD Software: CATIA_V5
  • Responsibilities:
  • Creating fully parametric 3D modeling and Surfacing.
  • Maintaining proper part history considering general guidelines for designing plastic parts.
  • Adding mounting and locating features as per part geometry and requirements.
  • Draft Analysis, Sink mark traps, considering the root thickness.
  • Using power copy for placing feature in specified co-ordinates.
  • Maintaining day to day activities of project work.
  • Galileo data management.
  • Parting line creation w.r.t. Tooling and Slider direction.
  • Check the all parameter before delivering it to customer like parametric data, uniform part thickness, remove sharp edges or sudden changes of part thickness for avoid sink mark, follow guideline, maintain attachment thickness half of part thickness.

Varroc Lighting Systems (Onsite) (roll of Autoone)
  • Program Name: Renault_ XJK Dokker Rear Lamp.
  • Description: Exterior 4 Wheeler Automotive Lighting System.
  • CAD Software: CATIA_V5
  • Responsibilities:
  • Creating fully parametric 3D modeling and Surfacing.
  • Maintaining proper part history.
  • Proper RPS system with 3-2-1 principles of locating.
  • Draft Analysis, Sink mark traps, considering the root thickness.
  • Maintaining day to day activities of project work.
  • Team center data management.
  • Lamp Feasibility with Stop, Tail, Reverse, Fog Functions.
  • Created light pipe, light pipe bracket and Reflector.
  • Knowledge of Lighting, DFMEA, Plastic Product development.

Education

B. E. - Mechanical

TPCT’s COE Osmanabad
Osmanabad, India
06-2016

Diploma - Metallurgical Engineering

GP Nagpur
Nagpur, India
05-2013

S.S.C -

JantaVidhyalay, Yedshi
Yedshi-Osmanabad
03-2010

Skills

MS WORD

MS OFFICE

POWER POINT

EXCEL

MS OUTLOOK AND TEAMS

2D and 3D modeling

CAD software

2D drawings

undefined

Disclaimer

I hereby declare that the above information are true to the best of my knowledge and Belief. 


                                                                                                                                                                                                         

                                                                                                                                                                                                                Thanks & Best Regards 

Place:                                                                                                                                                                                                     Pradip Patil

Date:

Timeline

Senior Design Engineer

TATA TECHNOLOGIES
03.2023 - Current

Design Engineer

EDAG Engineering, Germany (roll of IWOVS)
09.2021 - 02.2023

Design Engineer

IWOVS India Pvt Ltd.(roll of APPL)
02.2021 - 09.2021

Cad Engineer

Autoone Engineering Services Pvt, Ltd.
10.2017 - 02.2021

Lumax Industries Ltd. (In-house project in Autoone)

Faurecia Interior System India Pvt. Ltd. Pune (Onsite) (roll of Autoone)

Varroc Lighting Systems (Onsite) (roll of Autoone)

CAD Engineer

SMRC (In-house Project in Autoone)

B. E. - Mechanical

TPCT’s COE Osmanabad

Diploma - Metallurgical Engineering

GP Nagpur

S.S.C -

JantaVidhyalay, Yedshi
Pradip Ramesh PatilSenior Design Engineer