Prathap kumar Rajendran

• M/S. 33/3.3Kv GLCS Substation – ADNOC
• M/S. 33Kv Al dabbiya container station – ADNOC
• M/S. 220/33Kv BOROUGE 3 Substation – ADNOC
• M/S. 11/0.4Kv Substation-2 Sulphur granular plant – ADNOC
• M/S. 220/33Kv LCMO mobile Station – TRANSCO

Key Responsibilities

• Maintained up-to-date knowledge of industry trends, codes, standards, regulations affecting commissioning activities.
• Increased client satisfaction by providing technical support and troubleshooting during warranty period.
• Designing of primary & secondary schematics, Retrofitting & testing works, Modification in existing switchgears, New feeder extension etc.
• Enhanced system efficiency by designing electrical circuits and systems for various applications.
• Expedited problem resolution during production phases with troubleshooting expertise in complex electrical systems malfunctions.
• Increased customer satisfaction with implementation of design improvements based on their feedback and requirements.
• Document review of Gas Insulated substation handled (GIS)
• Preparation of sizing Calculations like CT, VT
• Preparation of relay final setting of LV ,MV outgoing feeder, Transformer feeder protections.
• Testing & Commissioning of NX AIR (siemens) 27 feeders & 8DA10 (siemens)25 feeders switchgear
• Modification/testing and commissioning of existing 33kV feeder. Protection relay testing of Siprotec 5 devices 7SJ85 & 7SL82
• New extension feeder testing & Commissioning of 8DA10 SWITCHGEAR
• Configuration & testing of Siprotec 5 devices 7SJ85 in existing station
• Modification/Replacing of LV panel 3WE8 ACB retrofit work, commissioning with existing panel.
• Existing transformer feeder interlock, Functional schemes check & energisation.
• Modification/testing and commissioning of existing 33KV feeder to GTAU feeder. Signal verification after changes at SCADA panel, FMS Panel & Common alarm panel.
• Protection relay testing of Siprotec 5 devices 7SJ85 for 33KV 8DA10 including integration of IED’s with Siemens SCMS
• Retrofitting & testing works to change existing 8BK20/30 to SION VCB’s

• M/S. 132/11kV Forsan Substation, dubai
• M/S. 132/33kV Taweelah RO plant, abudhabi
• M/S. 132/33kV New Mushrif Substation, dubai
• M/S. 132/33kV MBR-3 solar SS, dubai

Key Responsibilities

• Identified potential risks and developed mitigation strategies to minimize disruptions to project timelines.
• Implemented change management processes that minimized disruptions while maintaining forward momentum on projects
• Maintained accurate documentation of all projects, facilitating efficient audits and future reference.
• Developed comprehensive project plans, outlining scopes, timelines, deliverables, and milestones.Site Supervision, Installation, and coordination in Civil, MEP and testing commissioning of 17 Bays of 33KV GIS (8DB10).
• As a Project Professional involved in Project management, Project Execution, Procurement, Engineering, Material/Equipment etc.,
• Coordination with OEM/Subcontractor, FAT MOM, DEWA check list and Site Note closing.
• Testing of electrical & mechanical operation & functional checks in 8DB10 switchgear
• GIS SF6 Gas Quality Measurement, dew point& leakage test for all compartments.
• Preparation of test reports and detailed commissioning reports.
• Maintenance testing for MV switchgear (SIMOPRIME) in FEWA SS
• Maintenance testing for 132/33kv transformer bays & 33kv GIS 10 bay’s in MBR solar (DEWA)

• M/S. 132/33/11kV University SS, Sharjah
• M/S. 132/33/11kV Abushagra SS, Sharjah
• M/S. 132/33/11kV Tilal city SS, Sharjah
• M/S. 220/132kV Altay SS, Sharjah

Key Responsibilities

• Worked as testing and commissioning engineer under Siemens. Having more knowledge in Siemens Switchgear and equipment's commissioning up to 132kV level more expect in primary section.
• Handled Siemens GIS switchgear (Type-Nx plus c, SIMOPRIME, 8DA10, 8DB10, 8DN8 5 & 8DN8 Enhanced) up to 132kV level.
• Component testing of CT, VT.TPS & CB on 33kV 8DB10 for two sections & CB timing for 8DN8 Enhanced GIS
• Interlock checks for all feeder’s (Incomer, transformer, cable Feeder, Bus-section & Bus-coupler Project Execution & Relay retrofit
• Conducted Bus-bar Stability and Sensitivity for High Impedance Bus bar Differential Protection system. Testing of VT sec. injection, CT sec. injection, CT Primary injection.
• Overall sub-station SCMS signal’s & LDC test as per SAT procedure witnessed with end client.
• Testing of electrical & mechanical operation & functional checks
• Testing of SIEMENS-7SJ63, 7SJ64 Bay control Protection unit Relay
• Testing of Synch scheme, ON load Transfer schemes, Alarm, and indication for 132kv feeders.
• Preparation of test reports and detailed commissioning reports.

Key Responsibilities

• Participated in continuous improvement initiatives aimed at increasing efficiency within department or organization.
• Testing of control and relay panels ranging from 11kV to 400 kV, Handling of customer inspection and witness testing, Detail testing for FAT, Client inspection.
• DC logic Testing of Control and Relay panels ranging from 11kV to 400 kV.
• Handling of customer inspection and witness testing of control and relay panels.
• Testing of Numerical Protection relays all leading manufacturer (SIEMENS, ALSTOM, ERL, SCHNEIDER ELECTRIC, ABB)
• Factory Acceptance test Execution – Detail testing for FAT, Client inspection, etc w.r.to the projects.
• Accessing and implementation of logical requirements on site conditions as per project requirements.
• Ensuring quality of Protection logic configurations and operation of relays as per the project requirements