Pushpakaran Sanjeevachetty
Pulheim
Kurzprofil
- 15+ years of experience spanning across Embedded Automotive, Control systems, Signal Processing domains.
- Expert as Software Test Engineer with vast experience in Model-in-the-Loop, Software-in-the-Loop and Hardware-in-the-loop Testing.
- Expertise in Tool development for Test automation (Test creation, automated execution, validation and test report generation) in Model-in-the-Loop, Software-in-the-Loop, Hardware-in-the-Loop and Processor-in-the-Loop-testing.
- Strong Experience in Driving Simulator for operating the simulator and integrating and building the test environment for Tuning/Validation of Drive Assist Features.
- Expertise in MiL/SiL testing using BTCEmbedded Tester / Ford In-house Test Platforms/ CarSim.
- Expertise in HiL testing of FNV2/3/4/3.X using dSPACE softwares (ControlDeskNG, AutomationDesk, ModelDesk, MotionDesk, CalDesk), Python for EPAS and ADAS systems.
- Lead small teams in carrying out HiL Testing and Verification Toolchain development and validation.
- Expertise in Unit level and system level testing Expertise in Testing Features based on QM and ASIL
- LabVIEW experience in developing controllers and interface using NI DAQ PCI 6221, PCI 6251 for Data Acquisition and HiL testing in Power Electronics & Control System domain.
- Experience in design of PID controls, Fuzzy Logic controls for various applications.
Übersicht
17
17
years of professional experience
8000
8000
years of post-secondary education
1
1
Certification
Berufserfahrung
Function & Entwicklung Engineer
Ford Werke GmbH
Cologne
01.2016 - Current
- Responsible for Driving Simulator usage of ADAS Features by integrating the Software models and creating virtual CAN Architectures and supporting tuning of ADAS Features
- Responsible for Virtual Verification (in MiL/SiL platforms) for ADAS Features (Selectable Drive modes, Lane Keeping Aid)
- Developed a robust generic tool in MATLAB/Simulink for Test case creation, Automated Test case execution, evaluation and report generation in different Test Platforms(MiL/SiL/HiL)
- Managing the team working on MiL/SiL Unit level testing of ADAS Features in BTC Embedded Tester
- Managing the team working on component level SiL testing of ADAS features in MATLAB/Simulink environment
- Conducted regression testing and automated evaluation of ADAS features (LKS, ANC,PDC) in HiL Platform
- Developed and maintaining tools to support manual evaluation of the tests conducted in different platforms by creating automated figures for different measurement using predefined configurations
- Developed a tool using MATLAB for Comparing Measurement data between two Software measurements to support regression testing.
- Developed a GUI for creating Tolerance Structure, used in Evaluation of MiL and HiL testing of EPAS features
Project Engineer
Bertrandt Ingenieurbüro GmbH
Cologne
03.2013 - 12.2015
- Worked at Ford werke GmbH (in B2B) as System Engineer in Chassis Department
- Conducted Hardware in Loop testing for Base EPAS and ADAS Features (Semi-Automatic parallel Parking, Pull drift Compensation) using dSPACE (ControlDeskNG, AutomationDesk, ModelDesk and MotionDesk) and Python for EPAS Steering.
- Developed a generic tool using MATLAB GUI for plotting and Automated plotting of measurement signals from ControlDeskNG, Simulink, CANape and CANalyzer formats (.mat, .asc, .blf, .mdf, .sti file formats).
- Developed a tool using MATLAB for Comparing measurement data from Hardware in the Loop testing between two software measurements.
- Developed a GUI for creating Tolerance Structure, used in Evaluation of MiL,SiL and HiL testing of EPAS features
- Developed a python script for MotionDesk automation from ControlDeskNG.
- Tools Used: MATLAB/Simulink, TargetLink, dSPACE (ControlDeskNG, AutomationDesk, ModelDesk, MotionDesk), Python
Engineer HiL Testing / Simulation
NSK Deutschland GmbH
Dusseldorf
02.2012 - 02.2013
- Conducted Hardware in Loop testing for EPAS Functions using dSPACE Softwares (ControlDesk, AutomationDesk, and CalDesk) and Python in EPAS Steering Team.
- Developed/tuned motor controller for HiL Testing to reduce torque ripples in HiL Setup.
- Project Scope: To conduct Hardware in Loop Testing for Electric Power Steering Systems using dSPACE (ControlDesk, AutomationDesk, CalDesk, Python) and MATLAB/Simulink.
- Project Details: Conducted Hardware in Loop Testing for Electric Power Steering Systems.
System Engineer
Geometric Limited
Chennai
01.2010 - 01.2012
- Worked for Ford as System Engineer in EPAS Global Core Steering, for Modeling and HiL Testing of EPAS steering features.
- Developed MATLAB/Simulink models for torque based requirements of SAPP.
- Conducted Hardware in Loop testing for EPAS Functions using dSPACE (ControlDesk, AutomationDesk, CalDesk) and Python for EPAS Steering Team.
- Project Scope: To conduct Hardware in Loop Testing for Electric Power Assist Steering Systems using dSPACE (ControlDesk, AutomationDesk, CalDesk, Python).
- Project Details: To conduct HiL Testing of Torque Based Requirements of EPAS systems.
Senior Software Engineer
Prodigy Technovations
Bangalore
08.2009 - 01.2010
- Involved in development of a software tool using LabVIEW, Measurement Studio, MATLAB/Simulink, C# for testing and analyzing of USB 3.0 architecture for Tektronix instruments. The application is integrated using PCI Express.
IT Engineer
CMC Limited (R&D)
Hyderabad
08.2008 - 06.2009
- Team Lead for design of Auto Depth Controller for SSK class submarine.
- Design and modeling of Submarine simulator for Indian Navy using MATLAB/Simulink.
- Design of the Auto Depth Controller for the Submarine using PD Fuzzy Logic control.
- Auto code generation of the MATLAB/Simulink submarine model & Auto Depth Controller for HIL testing using RTW.
- Performance of HIL testing & Validation of ADC using PCI1716, LabVIEW.
- Project #2: Performance monitoring, Control & Data Acquisition of Battery Management Systems using LabVIEW & PCI cards (PCI 6225, SCXI 1125, SCXI 1600).
- Project #3: Offshore Team Lead for Transmission Control - Diagnostic code Redesign.
Ausbildung
Bachelor of Engineering - Electrical & Electronics
University of Madras
ChennaiMaster of Engineering - Control & Instrumentation
College of Engineering Guindy, Anna University
ChennaiH.Sc - Maths, Physics, Chemistry
Seventh Day Matric HSc. School
DharmapuriX - Matriculation
Seventh Day Matric HSc. School
DharmapuriKompetenzen
MATLAB/Simulink/Stateflow
Auto Code Generation
Python
CarSim
CarMaker
VI-CarRealTime
VI-Grade Softwares
SimWorkBench
ViDrivesim
VIDashBoard
ViRoad
WinTax
RfPro
dSPACE Tools
ControlDeskNG
AutomationDesk
ModelDesk
CalDesk
MotionDesk
Vector Tools
CANape
CANalyzer
GitHub
Jenkins
LabVIEW
PSpice
C
Microcontroller programming
Linux
Languages
English
Fließend (C2)
C2
Deutsch (B1 level)
Fortgeschritten (B1)
B1
Tamil
Fließend (C2)
C2
Telugu
Kompetent (B2)
B2
Hobbys
- Playing Chess
- Badminton
- Gardening
Custom
- Advanced Drive Assistance Systems, RWTH Aachen, 2 weeks
- Battery Electric Vehicle (overview and Deep dive), RWTH Aachen, 10 days
- Embedded Systems Basic, FH Aachen
- Embedded Systems Advanced, FH Aachen
- Operator for VI Grade Driving Simulator, Certification
- Functional Safety overview, Training
- Hazard and Risk Assessment, Training
Zertifizierung
- Zertifikat in [Sprache]
Zeitleiste
Function & Entwicklung Engineer
Ford Werke GmbH
01.2016 - Current
Project Engineer
Bertrandt Ingenieurbüro GmbH
03.2013 - 12.2015
Engineer HiL Testing / Simulation
NSK Deutschland GmbH
02.2012 - 02.2013
System Engineer
Geometric Limited
01.2010 - 01.2012
Senior Software Engineer
Prodigy Technovations
08.2009 - 01.2010
IT Engineer
CMC Limited (R&D)
08.2008 - 06.2009
Bachelor of Engineering - Electrical & Electronics
University of Madras
Master of Engineering - Control & Instrumentation
College of Engineering Guindy, Anna University
H.Sc - Maths, Physics, Chemistry
Seventh Day Matric HSc. School
X - Matriculation
Seventh Day Matric HSc. School