RAMAKRISHNAN Srinivasan
Chennai
Summary
Dynamic Piping Designer with over 12 years of experience in the oil and gas industry, recognized for fostering strong client and team relationships. Expertise in problem-solving and a proactive approach has consistently led to successful project outcomes and operational efficiency. Proven ability to deliver innovative piping solutions that enhance productivity and reduce costs. Committed to leveraging technical skills and industry knowledge to drive future project successes.
Overview
16
16
years of professional experience
Work History
S3D DESIGNER-PIPING
M/S BECHTEL INDIA PVT LTD
Chennai
05.2023 - Current
- Company Overview: Project: CORPUS CHRISTI LIQUEFACTION STAGE 3 (CCL-3), TEXAS, USA
- Client: CHENIERE ENERGY
- Involved in pipe routing of flare lines
- Support modelling for critical lines as per stress mark-up
- Involved in issuance of IFC Isometrics for OSBL, Tain-1 Cryogenic Area and its replication in Train-2 to Train-5
- Project: CORPUS CHRISTI LIQUEFACTION STAGE 3 (CCL-3), TEXAS, USA
- Client: CHENIERE ENERGY
PIPING DESIGNER
M/S TECHNIP ENERGIES
10.2022 - 05.2023
- Company Overview: Project: QATAR GAS NORTH FIELD EAST (QNFE)
- Client: QATAR ENERGIES
- Equipment modelling and Nozzle orientation as per vendor drawing in S3D
- Piping & Support Modeling in S3D
- Updating Supports according to stress mark up for critical lines
- Reviewing and commenting the vendor drawing as per Equipment Data Sheet for Tanks, Vessel, Pumps & Piping Interface
- Extracting isometrics for IFC based on following check points below
- PID & Other Process Requirements
- Equipment
- Material
- Instrumentation
- Design Specification & Engineering Memo
- S3D/CADD
- Project: QATAR GAS NORTH FIELD EAST (QNFE)
- Client: QATAR ENERGIES
PIPING DRAUGHTSMAN
M/S KUWAIT NATIONAL PETROLEUM COMPANY (KNPC)
04.2017 - 09.2021
- Company Overview: MINA AL AHMADI REFINERY (MAA)
- Contract # CB/CSPD/0007 (EPC)
- SP3D modelling of equipment's such as knock out drum, separator, exchangers
- Piping Modeling around these equipment's
- Periodic site visits to ensure modelling is done with factual accuracy
- Isometric Extraction of modelled pipes
- Preparation of Piping Isometric Drawings as per existing site condition
- Preparing Thickness Measurement List (TML) and marking defect locations in isometric drawings
- Preplanning for Shutdown (MRTA) work by crosschecking old reports and site condition and updating discrepancy if any
- MINA AL AHMADI REFINERY (MAA)
- Contract # CB/CSPD/0007 (EPC)
PIPING DRAUGHTSMAN
M/S GULF SPIC GENERAL TRADING & CONTRACTING CO. WLL
07.2013 - 08.2015
- Company Overview: Project: Installation of Multi Point Smokeless HP Flare at 14 Nos
- Of South & East Kuwait GC's
- Client: Kuwait Oil Company (KOC)
- Cross verification of feed drawings by going to site, taking measurements, marking tie in location for initial design preparations
- Involved in Equipment modeling and fixing nozzles for Wet Crude Tank, Knock Out Drum, Pumps using SP3D
- Piping Model for sloped flare lines, fuel gas lines
- Preparation of demolition drawings, piping layout drawings and piping isometrics for both construction and demolition items
- Fine-tuning extracted GAD drawings
- Modifying the design drawings with changes in plot plan
- Preparation of Bill of Materials
- Isometric checking for IFC stage
- Participating with inter-discipline checks (IDC)
- Site co-ordination with concerned persons and involving in Field Query Analysis (FEQ)
- Updating inter discipline, vendor, construction team comments in drawings
- Project: Installation of Multi Point Smokeless HP Flare at 14 Nos
- Of South & East Kuwait GC's
- Client: Kuwait Oil Company (KOC)
CAD ENGINEER
M/S L&T INTEGRATED ENGINEERING SERVICES (IES)
04.2012 - 04.2013
- Company Overview: Project: Dakshin Detail Engineering
- Client: Procter & Gamble
- Preparation of Duct Drawing for Dust Control Area
- Preparation of Equipment GAD and Isometric for Dust Control Area
- Preparation of Bill of Materials
- Project: Dakshin Detail Engineering
- Client: Procter & Gamble
PIPING DRAFTSMAN
M/S EDAC ENGINEERING LIMITED
02.2009 - 03.2012
- Company Overview: Project: PIB Plant Expansion Project
- Client: Kothari Petrochemicals Limited
- Preparation of Piping Layout Drawings for Pipe Rack Area, Depropanizer Area & Effluent Storage Area
- Preparation of Isometric Drawings
- Involved in preparing Bulk MTO
- Updating As-Built GAD and Isometrics with reference to EDPC Standard
- Updating P&ID Mark-up in GAD and intimating it to the engineer to check whether it is updated at site
- Project: PIB Plant Expansion Project
- Client: Kothari Petrochemicals Limited
Education
DIPLOMA IN MECHANICAL ENGINEERING (DME) -
Sankar Polytechnic College
01.2007
SSLC -
Jayendra Golden Jubilee Matriculation School
01.2004
Skills
- Smart Plant 3D
- Smart Plant Review
- Navis Work
- AUTOCAD
- MS-OFFICE
Personal Information
- Passport Number: P6522584
- Expiry Date: 07-Jan-2027
- Date of Birth: 03/11/88
- Nationality: Indian
Disclaimer
I hereby declare that information given above are true and correct to the best of my knowledge and belief.
Timeline
S3D DESIGNER-PIPING
M/S BECHTEL INDIA PVT LTD
05.2023 - Current
PIPING DESIGNER
M/S TECHNIP ENERGIES
10.2022 - 05.2023
PIPING DRAUGHTSMAN
M/S KUWAIT NATIONAL PETROLEUM COMPANY (KNPC)
04.2017 - 09.2021
PIPING DRAUGHTSMAN
M/S GULF SPIC GENERAL TRADING & CONTRACTING CO. WLL
07.2013 - 08.2015
CAD ENGINEER
M/S L&T INTEGRATED ENGINEERING SERVICES (IES)
04.2012 - 04.2013
PIPING DRAFTSMAN
M/S EDAC ENGINEERING LIMITED
02.2009 - 03.2012
DIPLOMA IN MECHANICAL ENGINEERING (DME) -
Sankar Polytechnic College
SSLC -
Jayendra Golden Jubilee Matriculation School
Similar Profiles
Archana PArchana P
Contracts & Purchasing Specialist at Bechtel India Pvt LtdContracts & Purchasing Specialist at Bechtel India Pvt Ltd
Genish GGenish G
S3D Layout Engineer Piping at Bechtel India Pvt. Ltd.S3D Layout Engineer Piping at Bechtel India Pvt. Ltd.
SANDEEP DHOBLESANDEEP DHOBLE
Corporate Category Management Lead – Plant Design and Control Systems at Bechtel India Pvt LtdCorporate Category Management Lead – Plant Design and Control Systems at Bechtel India Pvt Ltd
Abser Ali SAbser Ali S
Data Solution Architect at DXC TechnologyData Solution Architect at DXC Technology
LOKESH KUMAR CLOKESH KUMAR C
Senior CAD/BIM Technician at Systra MVA Consulting INDIA Pvt LtdSenior CAD/BIM Technician at Systra MVA Consulting INDIA Pvt Ltd