Saleesh Kumar Chemboori Subrahmanian
Thrissur, Kerala
Summary
Managed offshore pipelay operations onboard various construction vessels from pipe loading through final installation. Coordinated daily pipelay activities between vessel management, construction, welding, NDT, survey, and client representatives. Monitored pipeline production rates and optimized installation efficiency while maintaining safety and quality requirements. Supervised welding, NDT, field joint coating, repair activities, and pipeline acceptance processes. Led offshore installation of subsea spools, jumpers, risers, and tie-in activities. Verified material availability, traceability, certification, and work-pack readiness before offshore execution. Coordinated as-built documentation, punch-list closure, hydrotest reinstatement, and mechanical completion activities. Supported vessel operational planning, SIMOPS management, and offshore risk assessments. Ensured compliance with client specifications, project procedures, and international codes. Prepared daily progress reports, installation records, and offshore technical queries. Participated in HAZID, toolbox talks, and incident investigations to improve operational performance. Managed offshore interfaces with clients, marine warranty surveyors, and subcontractors.
Overview
23
23
years of professional experience
13
13
Certification
Work History
Welding & NDE Specialist (AGI-Construction & Quality)
EACOP
Thazania
07.2025 - 06.2026
- Overall coordination and the performance of the day-to-day Welding and NDT process activities of the main works CONTRACTORs on the EACOP Project.
- Develop and implement a WQMS (Welding and NDT Qualification Management Strategy) based on Welding and NDT approved processes and compliance strategies of the main Construction CONTRACTORs.
- Interfaced with the onsite construction and fabrication sequences and support the facilitation of the Welding and NDT qualification for the CONTRACTOR based on the applicable construction strategy and Construction CONTRACTOR’s supplied data.
- Directly supporting EACOP & the CONTRACTORs ensuring delivery of the EACOP Project, whether pipeline or Above Ground Installations.
- Implement, use, and communicate safe work practices on and off the Project Sites.
- Mentor exemplary behaviour regarding Project H3SE policy.
- Support CONTRACTOR Construction Engineering in accordance project requirements and procedures.
- Collaborate with CONTRACTOR to ensure accurate interpretation of procedures and provide technical support to address challenges.
- Evaluate CONTRACTOR method statements and work procedures in conjunction with Welding and NDT Field Engineering.
- Coordinate necessary inspections and testing with the Construction Quality Lead, ensuring compliance with Inspection and Test Plans (ITPs) hold points.
- Ensure the competency and proper training of the Welding and NDT workforce at site.
- Oversee the maintenance and daily checks of Welding and NDT equipment, as well as the preservation of materials according to supplier recommendations.
- Managed acceptance of completed work in accordance with project standards. operations and oversee punch list follow-ups.
- Monitor Welding repairs and NDT activities, ensuring alignment with manufacturer recommendations.
- Perform RT film review, PAUT data interpretation and witness Manual UT at site.
- Oversee CONTRACTOR's management of material storage, including weather control, expiration dates, and stock provisions.
- Verify material availability against approved drawings, BOMs, MTOs, and construction schedules to ensure timely execution of piping and offshore installation activities.
- Coordinated with procurement, warehouse, and construction teams to confirm availability of piping materials, fittings, valves, flanges, gaskets, and consumables prior to work commencement.
- Monitored material shortages and delivery status, identifying potential schedule impacts and implementing mitigation plans.
- Supported work-pack and test-pack preparation by confirming availability of all required materials, components, and associated documentation.
- Coordinated resolution of material discrepancies, damage reports, and non-conforming material issues to prevent construction delays.
- Actively participate in Welding and NDT process initiatives, emphasizing weld quality and optimizing production throughput.
- Review Vendor and Construction CONTRACTOR documentation packages for Welding and NDT processes.
- Conduct technical audits of CONTRACTOR and Vendor systems pertaining to all Welding and NDT processes.
- Led piping construction, fabrication, installation, testing, and pre-commissioning activities.
- Coordinated welding, NDT, PWHT, hydrotesting, reinstatement, and mechanical completion activities.
- Conduct KPI Meetings, Daily test pack progress meetings, assure contractor working based on the millstone basis.
- Monitored contractor performance, punch-list closeout, and quality KPI achievement.
- Led root cause analysis, NCR disposition, corrective actions, and continuous improvement initiatives.
- Experienced in using a range of oil & gas project management and collaboration tools such as Aconex (document control), iObeya (visual and Lean project management), Omie (ERP and business process management), and Oodrive (secure document sharing and data room management), PetroIT, Naviswork etc.
- Familiar with Total General specifications, Opercom Methodology and CMT-HEXAGON (Completion Management Tool).
Project Quality Engineer
SAIPEM Abu Dhabi
Abu Dhabi, UAE
10.2024 - 06.2025
- Implement quality control procedures to ensure compliance with project specifications and industry standards.
- Lead root cause analysis and corrective/preventive action plans to minimize defects and rework.
- Managed quality assurance record documentation to ensure traceability and compliance.
- Led a multi-discipline inspection team (welding, NDT, coating, electrical, instrumentation, civil) across EPC project phases, ensuring alignment with project quality plans.
- Conducted internal and subcontractor audits per ISO 9001; issued audit reports and followed up on corrective actions to close compliance gaps.
- Managed subcontractor qualification and performance monitoring; enforced adherence to project procedures and contractual quality requirements.
- Monitor adherence to QMS.
- Collaborate with clients and third-party inspectors to ensure project acceptance and final handover.
- Developed and maintained inspection and test plans (ITP) to align project deliverables with quality standards.
- Develop and maintain ITP.
- Ensure proper calibration and maintenance of inspection tools and equipment used in the Yard.
- Interfaced with Client/PMC for quality matters, resolved site queries, and secured approvals for deviations/concessions with proper technical justification.
- Review and Prepare the Quality procedures.
- Championed lessons learned and continuous improvement initiatives, reducing weld repair rates and NCR recurrence across subsequent work packs.
- Championed continuous improvement initiatives, leading to reduced weld repair rates and minimized NCR recurrence in subsequent work packs.
- Ensured HSE-Quality interface: controlled quality-related hazards, ensured safe execution of inspection/testing activities, and compliance with PTW/JSA.
SURF Site Quality Lead
British Petroleum (Seconded by RINA)
Dakar
12.2023 - 08.2024
- Review project documents (Company spec, procedures, ITPs, Drawings and etc).
- Conduct material receiving inspection with contractor quality team.
- Monitor the storage, Handling and preservation of company issued materials (CPI materials) to approved procedures.
- Witness welder qualification (Structural & Pipeline scope).
- Witnessed qualification of painting and coating applicators, contributing to quality assurance standards.
- Witness the welding and coating pre-production test (PPT).
- Monitored contractor welding and coating consumable stores, ensuring compliance with material certification requirements.
- Monitor welding (CS & CRA spools), non-destructive testing (DPI, PMI, MUT), and automated ultrasonic testing (AUT – Applus RDT Rotoscan system) activities during the fabrication of rigid and well jumper spools.
- Monitor contractor and subcontractor fabrication, welding and coating activities comply with the procedure requirements.
- Interpret AUT Data, Witness NDT and review RT films for the acceptability of the welds.
- Witness the painting and coating activities (HSS on 3LPP coated pipes and Calor application on 5LPP coated pipes).
- Witness the FCGH (Flooding, Cleaning, Gauging and Hydrotest) activities.
- Witness Site Integration Testing (SIT).
- Attended weekly meetings with contractor quality team to align on project quality objectives and progress.
SURF Site Quality Lead
British Petroleum (Seconded by RINA)
Mauritania
02.2023 - 12.2023
- Oversee the daily inspection activities held by the contractor and subcontractors.
- Perform the incoming material inspection with the contractor Quality team, review MRB / dispatch dossier, and sign off material receiving inspection documentation.
- Monitor the material handling during load in and load out from the vessel and in the yard.
- Verify storage and preservation of various materials, SURF equipment and SURF structures to the procedures (Project line pipes, Bends (CS & CRA), Rigid and well jumper Spools, EFL, OFL, STFL, FTAs, Sensorlink, Cybernetic, FOC, PLEM, PCDM, Umbelical, stabs, receptacles, SSIV structures, concreat mattresss, HOC, BA Pipes, Strut, Anodes, PWM clamps, SPS contractor equipments and materials, PLRs and forged items).
- Monitor the receipt, handaling and storage condition of the welding and coating consumable store.
- Maintain the site register for OS&D, NCR, observations and other metrics relevant for the site.
- Attend the OS&D meetings to ensure clearance of outstanding materials.
- Review MTC of the welding consumables and material certificates of the coating consumables.
- Ensure PDT (Pre Deployment Test) of SURF and SPS permanent works are conducted in accordance with the pre-deployment list, prior to load out.
- Witness SIT (Site integration test) is carried out as per project procedures.
- Ensure all the materials and equipment delivered for offshore activities are in good conditions according to project requirements.
- Witness Modification and valve seat tests of the FTAs.
- Review Sub-contractor NDT technician’s qualification and witness the conventional NDT such as DPI, MT, UT, and Review RT films.
- Monitor and Verify the load out of the materials are as per the procedures.
- Attend the daily meeting with contractor and highlight the quality concerns.
SURF Site Quality Lead
British Petroleum (Seconded by RINA)
Mauritania
06.2022 - 12.2023
- Installation of SURF structures.
- Installed subsea structures for enhanced oil recovery.
- Inspected and verified incoming materials against project specifications to ensure compliance.
- Inspect the welding consumable store, review MTC to assure its meet the approved WPS and qualified PQR requirements.
- Reviewed and verified availability of approved PQR, WPS, ITP, NDT, and other project documents for project readiness.
- Review NDT Procedure, NDE personnel Qualification and Equipment register.
- Verify the calibration of welding equipment’s and QC Tools.
- Verify the setup of the pipe tally system (PTS).
- Monitor the welding activities in the laybarge.
- Interpret the AUT Results (AUT System: RTD Rotoscan).
- Monitor HSS, HDPU, FBE, IMPP Coating applications.
- Project Involment: 30” x 21.3 and 25.4mm, 40km Carbon steel GAS export pipeline (C-Mn DNVGL SAW 450 Material).
- Monitored welding activities on laybarge to ensure adherence to quality standards.
- 16.75”x 34mm, 158km Pipeline (Material - (Material- DNVGL SMLS 450 SDUPF).
- 10.75“ x (19+3) 15 km Pipeline (Material- DNVGL SMLS 450 + 3mm 625 CRA – (Metallurgical Bonded clad).
- The Tortue field is located approximately 120km offshore the coast of Senegal and Mauritania straddling the maritime border, in 2,850m water depth. The subsea system includes a total of 4 wells clustered at one drill centre. The production system ties back approximately 70km to a spread moored FPSO positioned at the shelf edge in 100-120m water depth.
QA/QC Supervisor
Technip (PMC of Kuwait Oil Company)
Kuwait
02.2021 - 04.2022
- Assist and support the Head of Quality Offshore in implementing the Construction Surveillance Program for Pipelines to confirm that all fabrication, construction and installation activities are compliant with project specifications, including Development of Construction Surveillance plan for each pipeline construction and installation activity identifying key inspection interventions.
- Reviewing and approving Contractors and Subcontractors Inspection & Test Plans, quality control procedures and testing procedure.
- Attending regular construction meetings with Contractor and subcontractor to monitor progress and review and resolve quality issues arising.
- Assigning and managing inspection resources using COMPANY approved inspection agencies to conduct surveillance inspections at fabrication and laydown yards and on offshore vessels and worksites.
- Conducting Flawless Quality training programs in conjunction with Contractor to eliminate common defects.
- Conducting regular site walk-throughs with laydown yard or vessels management team to highlight quality issues and identify areas for improvement.
- Ensure that inspection records are maintained in a database that is aligned with completions management system to ensure a smooth handover to commissioning.
- Quality Audit Program to confirm that pipeline construction and installation activities are conducted in accordance with agreed plans and implement.
- Lessons Learned Program to actively and continuously capture learnings from pipeline construction and installation activities and to use them to develop and optimise process or specification improvements.
- Issues and Risks Program relating to pipeline construction and installation activities and ensure that issues and risks are captured and treated promptly and effectively.
- Implement Quality Reporting Program to monitor pipeline construction and installation activities; and to communicate and report on quality performance, issues and risks, and developing trends to Head of Quality – Offshore and Head of Pipelines.
- Maintain interfaces, including with pipeline team to ensure that quality issues are resolved promptly and effectively.
- Maintain interfaces with system completion team to ensure that inspection records are aligned with and support system completion.
- Maintain interface with project management team to provide feedback on quality issues to expedite closure of lessons learned to provide feedback on quality performance generally.
QA/QC Supervisor
RINA Egypt LLC
On board FDS 1, CASTRO-6 & Saipem 7000, East Nile Delta offshore Egypt
02.2020 - 12.2020
- Ensured site activities adhered to reference documentation to maintain compliance.
- Review and Verify the availability of Approved PQR, WPS’s, ITP, NDT and other project documents.
- Verify the contractor/subcontractor QC Personnel qualifications meet the client specified requirements.
- Review NDT Procedure, NDE personnel Qualification and Equipment register.
- Verify the calibration of welding equipment’s and QC Tools.
- Verify the calibration of welding equipment and QC Tools.
- Set up the pipe tally system (PTS) to ensure accurate tracking of materials.
- Inspect the welding electrodes, storage conditions, review MTC to assure, its meet the approved WPS and qualified PQR requirements.
- Inspect the welding electrodes, storage conditions, review MTC to assure, it’s meet the approved WPS and qualified PQR requirements.
- Review welder test logs, welder certificates, welder register and signed off the reports.
- Review the procedure, HSS application Data sheet and Witness the PQT for coating.
- Verify the absence of contamination at the pipe inner surface.
- Surveillance inspection to verify the J-bevel tolerance meet the approved WPS.
- Surveillance inspection to verify the J-bevel tolerance meets the approved WPS.
- Checked the scribe line to ensure accuracy for automated ultrasonic testing (AUT).
- Measured residual magnetization using a gauss meter to ensure compliance with standards.
- Witness the pre-production test for both welding and coating before the production.
- Witness the back purging and preheating prior to welding.
- Witness the calibration of laser tool, witness the plasma remelting and perform IVT (Internal visual inspection) using the camera with plasma remelting.
- Monitor weld parameter are as per the approved WPS.
- Monitor weld parameters are as per the approved WPS.
- Perform the visual inspection and monitor water cooling of the weld to meet the procedure requirements before AUT can be done.
- Witness the repair welding and Manual UT scan and interpret the AUT scan on the repair welds.
- Witness the repair welding and Manual UT scan and interpret the AUT scan on the repair welds.
QA/QC Lead Inspector
TRAGS
Qatar
04.2020 - 07.2020
- Verify Inspection reports for test and Inspection.
- Supervised, monitored, measured, and evaluated performance of quality personnel to ensure compliance with project standards.
- Participated in quality meetings to discuss project issues and improvements., Analysis and Evaluate the Quality Issues.
- Organized and updated all project quality records to ensure compliance and accessibility.
- Preparation of Mechanical/Piping Test Packages for Pre-Box up / Box up and arrange walkthroughs for.
- Review, Close, Maintain and Update all NCR’s, CAR, LBE’s/Surveillances within specified period as per project requirements.
- Reviewed, closed, maintained, and updated all NCRs, CARs, and LBE surveillances within specified periods.
- Ensure that all construction phase work is being done as per the latest revision of Drawing, Specifications, standards, and projects are maintained and updated properly.
Welding & AUT Inspector
Fulkrum
Kakinada, Andhra, India
12.2018 - 04.2019
- Part of the Reliance Project Management Team (INTECSEA) provides necessary support and reports to INTECSEA manager and onboard CSR, regarding contract issues that relate to Quality, Progress and HSE, to ensure the Contractors are met with the Approved procedures & Client Specification.
- Review Transit Fix report prepared by FUGRO survey team.
- Witnessed Jacket installation by lift and set method, followed by mud-mat survey using ROV/Diver and confirming the positioning and orientation of the jacket as per the approved drawings.
- Verified jacket leveling through collaboration with the survey team. and orientation with Fugro survey team.
- Monitoring pile driving and pile cut-off as per the drawing.
- Witnessing post crown shim weld elevation and level checks survey.
- Witnessing Pre and post weld elevation and level checks survey of Boat landings.
- Inspection on leg to leg distance B/W transition pieces, post weld transition piece DC, stubbing verticality and Temporary deck level (TDD) and elevation checks survey.
- Conducted audits of technicians to ensure compliance with company accreditation standards. to ensure meeting the requirement company accreditation and project quality standards and make sure with document both soft copies and hard copies.
- Ensure that safety policies and procedures are understood to a reasonable practice In order to ensure a safe working environment.
- Review project specifications, ITP, Procedures and drawings.
- Perform the incoming material receiving inspection and review MTC.
- Review and accept inspection personnel (QC & NDT) qualifications.
- Review AUT calibration block design drawings, validation plan.
- Verify the approved AUT calibration blocks, PAUT and MUT calibration blocks.
- Witness Welder/welding operators qualification test, Interpret the AUT Results (McDermott Subcontractor Applus RTD AUT System: ROTOSCAN. Allseas AUT System: Showcore.), and witness the mechanical tests.
- Review welder test logs, welder certificates, welder register and signed off the reports.
- Witness the pre-production test.
- Verify the absence of contamination at the pipe inner surface.
- Witness the fit-up, preheating, monitor the welding parameter.
- Executed visual inspections to identify any potential defects or issues..
- Witnessed and interpreted AUT results for McDermott subcontractor and Allseas systems, signing off on reports to validate compliance with quality standards.
- Witness the repair welding and Manual UT Inspection.
QA/QC Supervisor
RINA Egypt L.L.C.
Saipem FDS -1, FDS -2 J-lay Barges and Castro 6 S-lay Barge, Egypt
04.2018 - 11.2018
- Contributed to the 3rd party certification authority inspection team, confirming job performance met approved procedures and client specifications.
- Inspect and verify the incoming materials are as per project specifications and review MTC.
- Review and Verify the availability of Approved PQR, WPS’s, ITP, NDT and other project documents.
- Verify the contractor/subcontractor QC Personnel qualifications meet the client specified requirements.
- Review NDT Procedure, NDE personnel Qualification and Equipment register.
- Verify the calibration of welding equipment’s and QC Tools.
- Verify the setup of the pipe tally system (PTS).
- Inspect the welding electrodes, storage conditions, review MTC to assure, it meets the approved WPS and qualified PQR requirements.
- Witness Welder/welding operators qualification test, Interpret the AUT Results (AUT System: PIPEWIZARD V4), and witness the mechanical tests.
- Review welder test logs, welder certificates, welder register and signed off the reports.
- Review the procedure, HSS application Data sheet and Witness the PQT for coating.
- Verify the absence of contamination at the pipe inner surface.
- Witness the PT inspection on the CRA (corrosion resistance Alloy) Bevel ends.
- Surveillance inspection to verify the J-bevel tolerance meets the approved WPS.
- Verify the scribe line for AUT.
- Verify the residual magnetization using guess meter.
- Examine the ceramic shoes prior to fit up, perform the fit-up inspection.
- Witness the pre-production test for both welding and coating before the production.
- Witness the back purging and preheating prior to welding.
- Witness the calibration of laser tool, witness the plasma remelting and perform IVT (Internal visual inspection) using the camera with plasma remelting.
- Monitor weld parameters are as per the approved WPS.
- Perform the vbeual inspection and monitor water cooling of the weld meet the procedure requirements before AUT can is done.
- Auditing, witness and interpret AUT results of the pipeline weld joints and PAUT Results of Tie-ins and reporting.
- Witness the repair welding and Manual UT scan and interpret the AUT scan on the repair welds.
QA/QC Supervisor
Oceaneering Ois LLC
Abu Dhabi, UAE
06.2016 - 03.2017
- Developed and implemented strategic operational plans to enhance project efficiency.
- Analyzed project data to identify trends and inform decision-making processes.
- Collaborated with cross-functional teams to streamline communication and improve workflow outcomes.
- Led training sessions for new staff, promoting adherence to safety protocols and operational standards.
Education
Diploma In Mechanical Engineering -
Kerala Institute of Engineering Technolagy
Kottayam, Kerala01-2001
Skills
- Welding process (GMAW, FCAW, TIG, SMAW, SAW, PAW)
- Coating (IMPP, CMPP, FBE, HSS, 3LPP, MLPP, HDPU, CALOR, PUF, PFP)
- NDT (RT, PT, MT, UT, PAUT, TOFD, AUT)
- AUT
- Offshore Pipelay
- Subsea Installation
- Welding Coordination
- NDT Coordination
- Mechanical Completion
- CMT ( Commissioning management Tool)
- Commissioning
- Pipeline Hydrotesting
- Vessel Operations Coordination
- Quality Assurance
- Quality Control
- Risk Assessment
- SIMOPS
- Client Management
- Contractor Management
- Project Planning
- Reporting
- Quality assurance
- Management collaboration
- Root-cause analysis
- Quality assessment
- Continuous improvement
- Failure management
- Problem-solving
- Problem-solving abilities
- Team building
- Process improvement
- Conflict resolution
- Audit reporting
- Quantitative skills
- Project management
- Workflow automation
- Proficient in [software]
- Documentation management
Certification
- Certified [Job Title], [Company Name] - [Timeframe]
- [Area of expertise] License - [Timeframe]
- [Area of certification], [Company Name] - [Timeframe]
Timeline
Welding & NDE Specialist (AGI-Construction & Quality)
EACOP
07.2025 - 06.2026
Project Quality Engineer
SAIPEM Abu Dhabi
10.2024 - 06.2025
SURF Site Quality Lead
British Petroleum (Seconded by RINA)
12.2023 - 08.2024
SURF Site Quality Lead
British Petroleum (Seconded by RINA)
02.2023 - 12.2023
SURF Site Quality Lead
British Petroleum (Seconded by RINA)
06.2022 - 12.2023
QA/QC Supervisor
Technip (PMC of Kuwait Oil Company)
02.2021 - 04.2022
QA/QC Lead Inspector
TRAGS
04.2020 - 07.2020
QA/QC Supervisor
RINA Egypt LLC
02.2020 - 12.2020
Welding & AUT Inspector
Fulkrum
12.2018 - 04.2019
QA/QC Supervisor
RINA Egypt L.L.C.
04.2018 - 11.2018
QA/QC Supervisor
Oceaneering Ois LLC
06.2016 - 03.2017
Diploma In Mechanical Engineering -
Kerala Institute of Engineering Technolagy
Personal Information
- Available: 2026-07-15 (Imminently available)
- Title: SURF QA/QC Site Lead
- Date of Birth: 15 March 1980
- Gender: Male
- Nationality: India
- Marital Status: Married
- Availability: 2 Week Notice
Technical Preview - Description
- Managed offshore pipelay operations onboard construction vessels from pipe loading through final installation.
- Coordinated daily pipelay activities between vessel management, construction, welding, NDT, survey, and client representatives.
- Monitored pipeline production rates and optimized installation efficiency while maintaining safety and quality requirements.
- Supervised welding, NDT, field joint coating, repair activities, and pipeline acceptance processes.
- Led offshore installation of subsea spools, jumpers, risers, and tie-in activities.
- Verified material availability, traceability, certification, and work-pack readiness before offshore execution.
- Coordinated as-built documentation, punch-list closure, hydrotest reinstatement, and mechanical completion activities.
- Supported vessel operational planning, SIMOPS management, and offshore risk assessments.
- Ensured compliance with client specifications, project procedures, and international codes.
- Prepared daily progress reports, installation records, and offshore technical queries.
- Participated in HAZID, toolbox talks, and incident investigations to improve operational performance.
- Managed offshore interfaces with clients, marine warranty surveyors, and subcontractors.
- Preparation of project Quality plan, Management Procedures, Inspection checklists, forms, Formats, Departmental Organization chart.
- Supervise the quality control functions including quality control inspection schedules and the collection of the quality records.
- Review inspection reports and the documentation issued by inspectors and collect and file the required reports for the quality records.
- Arrange and manage for quality personnel qualifications for welders, painters, blasters, applicators. Update and maintain of NCR Log, Calibration log, CAR Log, RFI Log, Proactive and Violation.
- Review Approved ITP, Procedures, Specifications, Drawings, WPS & PQR.
- Inspect the materials received and MTC are as per isometric drawings and specification requirements.
- Monitor the welder qualification and prepare the test log, Register and certificates.
- Verification of isometric drawing with respect to P&ID.
- Raising RFI’s for each item of work completed and attendance at site for witness/hold points.
- Ensure line pipes, fittings and valves, gaskets, bolts & nuts materials are received, inspected as per the inspection and test plan.
- Monitoring and calibration of inspection measuring and test equipment, maintain calibration history cards and calibration logs for measuring equipment.
- Close coordination with client and construction for inspection activities and to solve technical issues, disputes, Red line / As Built Drawings.
- Preparation of daily, weekly, monthly quality management reports. Two weeks look ahead schedule, weekly RFI status, Material receiving inspection status.
Language Skills
- English
- Hindi
Passport - Expiry Date
2031-02-28
Training
- 2024, NEBOSH IG1 & IG2 Course
- 2024, Subsea Engineering course completed and exam passed
- 2023, CSWIP 3.2.2 10th year renewal exam passed
- 2021, BGAS Grade 1 seminar and Exam
- 2021, ASNT Level 3 BASIC Preparatory
- 2021, Lead Auditor ISO 9001 - 2015 Conducted by IRS
- 2018, PAUT LEVEL II CSWIP course and exam Conducted by TWI Chennai
- 2018, TOFD LEVEL II CSWIP course and exam Conducted by TWI Chennai
- 2020, UT LEVEL II (3.1 & 3.2) CSWIP Conducted by TWI Chennai
- 2016, PAUT & TOFD, Oceaneering in-house course conducted by Mr. Dave Bentley
- 2015, UT LEVEL II PCN 3.1 & 3.2 – Conducted by SIS Vysak
- 2015, MT LEVEL II PCN – Conducted by SIS Vysak
- 2014, AUT Data Interpreter CSWIP Level II course and exam by TWI Chennai
- 2013, In house training AUT Operator as per Saipem Work Instruction WI-SPA-WELD-001 Lecturer Mr. Richad Lacosta at Rijeka NDT Laboratory Croatia
- 2010, CSWIP 3.2.3 Senior welding inspector by TWI Chennai
- 2006, CSWIP 3.1 Welding Inspector
- 2003, AWS CWI Conducted by BIT NDT, Pondichery
- 2002, ASNT MT Level II by BIT NDT, Chennai
- 2002, ASNT PT Level II by BIT NDT, Chennai
- 2002, ASNT UT Level II by BIT NDT, Chennai
- 2002, ASNT RT Level II by BIT NDT, Chennai