SANDESH KUMAR
Hardware Engineer
Udupi
Summary
A skilled and result oriented professional with over 12+ years of experience as an Diploma Electronics and communication engineer. Experienced in the field of aerospace hardware integration Testing, automation testing, and Hands on experience in software tool Xilinx vivado -2019, Teraterm & wind river. Experience in RF Testing and Measurement instrument like Signal Generator, Network Analyzers, Spectrum Analyzers and Oscilloscopes.
Overview
14
14
years of professional experience
1
1
Language
Work History
Hardware integration Testing Engineer
QUALITY EVALUATION And SYSTEM TEAM PVT.LTD (DRDO )
3 2022 - Current
- Actively Participated in Hardware Integration, and Automation Testing DP-30 System
- Performing Digital functionality Testing SOC to FPGA PCIe interface / SOC to DIO PCIe
- Performing JTAG Test by loading bit files Through JTAG and its verified in FPGA program
- Good Knowledge about different serial communication protocols RS422 /SPI/I2C/UART
- Performing ARINC429 and MILL-1553B interface Test verifying the output voltage level in CRO
- Debugging of Digital modules of DP-30 system
- Performing HSAD Standalone Test by collecting ADC data from printed in Teraterm and plotting waveform
- Good understanding schematic Drawing
- Good understanding of analog & digital electronic circuit
- Performing Power Consumption Test using clamp meter with load and without load
- Involved in EMC/EMI Test MIL-STD-810F
- Prepared the ATP/ATR documents as per Requirement.
Hardware integration Testing Engineer
SREE Vinayaka Enterprises
05.2018 - 02.2022
- Actively Participated in Hardware Integration, RF and Digital Functionality Testing in TYPE-2 System
- Performing Digital functionality Testing SBC to SBC-FPGA PCIe interface / SBC to DIO PCIe interface, SBC to HSAD PCIe interface
- Performing RF functionality Testing Receiver gain/Transmitter gain and Frequency coverage Test & Input power level Test, Harmonics and spurious measurement
- Performing JTAG Test by loading bit files Through JTAG and its verified in FPGA program
- Performing Audio interface Test by verifying the audio output voltage level in CRO
- Performing Video slope Test by Measuring the video slope for continuous wave and pulse wave
- Debugging of RF & Digital modules of RSAPR TYPE-2 system
- Hands on experience on Wave vision application for plotting FFT waveforms and analysis
- Performing HSAD Standalone Test by collecting ADC data from printed in Teraterm and plotting waveform
- Performing VSWR Measurement Test by measuring input and output VSWR of IO Matrix over the frequency
- Good understanding of Receiver Path DCA and Transmitter path DCA test
Instrumentation Engineer
KSK mahanadi power project 6*600mw thermal power plant
12.2013 - 05.2018
- Working as a team member, Instrumentation Engineer, actively participated in BTG system commissioning activities as follows
- Planning and execution of the Commissioning activities implementing with the all Field instruments at field i.e
- BTG area
- Coordinating with the team implementing with DCS Testing
- Commissioning of all field instruments by calibrating them with manually and remotely final checking of all types of Transmitters, with final control elements using 4 – 20 ma scheme
- Electrical actuator Calibrating & maintenance of Pressure, Level, and Flow & Temperature transmitters
- Calibration of Analyzers (O2, PH, SODIUM
- CEMS ANALYSER).
Maintenance Engineer
Udupi power corporation 2*600mw thermal power plant
12.2009 - 11.2013
- Working as a Maintenance Engineer, responsible for control & instrumentation Maintenance activities as follows BTG system
- Accountable for commissioning and maintenance of field instruments in Boiler and turbine
- Possess knowledge of Power plant control systems operation & their Troubleshooting through DCS and PLC(FOXBORO INVENSYS IACC SERIES, Emerson DCS, Allen Bradley
- Maintaining and preparing calibration ISO reports in C&I lab equipment
- Commissioning of Cooling water and Auxiliary cooling water System
- Calibrating & maintenance of control valves & motorized valve
- Electrical actuator Calibrating & maintenance of Pressure, Level, and Flow & Temperature transmitters
- Calibration of Analyzers (O2 analyzer)
- Preparing SOP documents of equipment’s Maintaining RTD and Thermocoupl.
Skills
Academic
Diploma in Electronics and Communication Engineering, Prasanna Polytechnic Ujire, Karnataka, 2009, 75%, Distinction,
S.S.L.C, Government Pre university college bajagoli udupi, Karnataka, 2004, 60%, First Class
Personal Information
- Passport Number: T9412577
- Date of Birth: 05/07/87
Disclaimer
I Sandesh kumar hereby do declare that the information given above is correct and true to the best of my knowledge.
Timeline
Hardware integration Testing Engineer
SREE Vinayaka Enterprises
05.2018 - 02.2022
Instrumentation Engineer
KSK mahanadi power project 6*600mw thermal power plant
12.2013 - 05.2018
Maintenance Engineer
Udupi power corporation 2*600mw thermal power plant
12.2009 - 11.2013
Hardware integration Testing Engineer
QUALITY EVALUATION And SYSTEM TEAM PVT.LTD (DRDO )
3 2022 - Current
Similar Profiles
Muskan GargMuskan Garg
Research Intern at DRDOResearch Intern at DRDO
VENKATA VIJAYA SHARATH MEDURIVENKATA VIJAYA SHARATH MEDURI
Engineer at DRDOEngineer at DRDO
Vaseem ShaikVaseem Shaik
Remote Programming Application for Multiple Hardware Systems at DRDORemote Programming Application for Multiple Hardware Systems at DRDO
Ashritha UdpikarAshritha Udpikar
Research Engineer at LG SoftResearch Engineer at LG Soft
Bharath NaikBharath Naik
Customer Service Executive at ACE Designers ltd-MCDCustomer Service Executive at ACE Designers ltd-MCD