SARIFUL ISLAM SHAIKH

Additional Scope: Construction of loops and ramps for road flyover at Central Silk Board Junction with an approximate length of 2.84 km.

· Establishment and maintenance of survey control points using GPS, Total Station and Digital Level.

· Survey and alignment works for viaduct, stations, loops and ramps.

· As-built survey, pier and deck slab monitoring.

· Coordination with client, design and construction teams.

· Preparation of survey reports and AutoCAD drawings.

• Self-motivated, with a strong sense of personal responsibility.
• Worked effectively in fast-paced environments.
• Skilled at working independently and collaboratively in a team environment.
• Proven ability to learn quickly and adapt to new situations.

• All survey work related roadbed and Rail track , layout of culvert, minor and major foundation and super structure , OGL Recording and level checking of subgrade , blanket material , blast and rail top.
• Close Traverse of all controlpoints and elevated metro by GPS and Total Station for Co-Ordinate and digital Level for elevation.
• PQC centerline markings
• Auto cad drawings
• To handle total station
• Stake out
• Auto cad drawings / survey report
• Proper B.m carry by auto level.
• Calculation of coordinate and bearing, staff reading, check drawings.
• Proper layout and topography as per given coordinate
• Maintain approved drawings & records. Layout marking as par given coordinate & site condition. Maintaining complete records of levels at site.
• Topographical surveying by tachometric process
• Proper layout checking as per approved drawings.
• Client: ADANI
• Project: Railway Track, Bulk Silo, Ware House, Retaining wall, & Laying, R.C.C. Road.Earth work in excavation / forming Embankment , GSB- WMM/BDM/BITUMINOUS WORKS , CEMENT CONCRETE WORK (PQC)

• Close Traverse of all control points of and elevated metro by GPS and Total Station for Co-Ordinate and digital Level for elevation.
• Responsible for Segment alignment and match cast segment for SPAN and EJ segment.
• 750 m Precast yard for Gantry Crain track alignment of 5nos BAY of Casting Mould Segment.
• Responsible for Shot Line and Long line Mould, Survey towers, Gantry shatter alignment, foundation of gantry column bolt etc. work.
• Also responsible for arranging the data import and export for survey work and Segment by MC3D Software for every Sand alone and Match Cast segment.
• Communication with design section and section In-charge for next planning and its implementation as per schedule instructed by junior surveyors
• Client: RVNL
• Project: METRO PROJECT

• IN-CHARGE WITH THE USE AND RECORDING OF THE MAJOR SURVEY INSTRUMENT UTILIZED IN THE FIELD.
• ORGANIZING AND MAINTAINING FIELD SURVEYOR TEAMS
• PROVIDING DATA FOR MONTHLY PROGRESS REPORTS IN CONNECTION WITH CONTRACTORS CLAIM FOR PAYMENT.
• ESTABLISHMENT OF HORIZONTAL AND VERTICAL CONTROL POINTS FOR FIXED REFERENCE USING GPS OR SOKKIA CX10 TOTAL STATION.
• TOPOGRAPHICAL SURVEYING BY TACHOMETRIC PROCESS
• PLAN & PROFILE DESIGN AS PER SITE CONDITION.
• ROAD ALIGNMENT DESIGN AS PER SITE CONDITION
• CONTOUR DRAWINGS
• LAYOUT AND TOPOGRAPHY AS PER GIVEN COORDINATE
• PROFILE AND CROSS SECTIONING OF AREAS COVERED BY SITE CONSTRUCTION AREA TO DETERMINEPORTION TO BE CUT OR FILL FOR PREPARATION OF MONTHLY PROGRESS ACCOMPLISHMENT FORMONTHLY PROGRESS BILLING.
• LAY-OUT AND SETTING OUT OF VERTICAL AND HORIZONTAL ALIGNMENT OF CONCRETE BRIDGE.
• PLOTTING OF DATA USING AUTOCAD 2D,AUTOCAD 3D, E SURVEY SOFTWARE
• ESTABLISHMENT OF HORIZONTAL AND VERTICAL CONTROL POINTS FOR FIXED REFERENCE USING TOTALSTATION AND AUTOMATIC LEVEL.
• SETTING OUT REQUIRED VERTICAL ELEVATION FOR ALL ARCHITECTURAL FINISHING.
• CHECKING THE CROSS SECTION FOR AS BUILT DRAWING
• PERFORM VERIFICATION SURVEY.
• Client: MPRDC
• Project: Rehabilitation and up gradation from existing Km22/8 Km to 89/6 of NH-12A Barela- Mandla) in the State of Madhya Pradesh on EPC Mode.

• Bridge points stake out
• Road centerline markings
• Auto cad drawings
• To handle total station ( pentax r422n )
• Stake out
• Pilening points
• Footing & column points
• All building & tank stake out
• Auto cad drawings / survey report Proper b.m carry by auto level.
• Proper b.m error calculation & adjustment.
• Calculation of coordinate and bearing, staff reading, check drawings.
• Proper layout and topography as per given coordinate Maintain approved drawings & records.
• Layout marking as par given coordinate & site condition.
• Proper layout checking as per approved drawings.
• T.s surveying by all usual method at plane & hill area.
• Proper layout and topography as per given coordinate
• Client: PWD
• Project: Sion Panvel express way Pqc road Ch. (126+350 to 140+630) an Bridge project 6 lane sanpada flyovers of 660m (130+570 to131+230

• Making of road centerline (total station)
• Fixing the t.b.m. and correction
• Making of different layers of earthworks like- cutting & grading, embankment , Makings medians, side shoulder, side drains, median drains etc.
• Emb layer, s/g layer, gsb layer
• Laying of wmm , dbm , bc
• Rfi
• Construction of culverts
• Find the quantity earthwork
• Fixing the t.b.m. and correction
• All type of road work like
• To handle total station (sokkia 330/) instrument.
• To handle total station (laika tc 402) instrument
• Client: PWD
• Project: Design, enginering, finance, construction, operation and Maintenance chandrapur maharashtra from km 81 msh 7 in The state of maharashtraunder nhdp phase-iii a on build, operate and transfer 4 lane road projec (bot) basis.