VOLUNTEERING
SOHAIL AHMED
MECHATRONICS ENGINEER
Abu Dhabi,United Arab Emirates
Summary
Skilled Mechatronics Engineer with advanced training in Repair and Maintenance Workshop tools Of Oil and Gas Industry. Proficient in interpreting sketches and diagrams to test and troubleshoot electrical and mechanical controls and rebuild Drilling Rig equipment and systems. Certified in performing maintenance on LWD/MWD Drilling Services Tools with 6 years of commercial and industrial maintenance experience performing diversified technical tasks.
Overview
6
6
years of professional experience
4
4
years of post-secondary education
4
4
Languages
Work History
AMO TECHNICIAN
ADNOC
Abu Dhabi, Abu Dhabi
03.2021 - Current
- Responsible for Maintenance, servicing and
- Inspection of MWD Cabins which are used on Rig Floor by coordinating and understanding Operational requirement.
- Performs Cabin complete electrical and mechanical troubleshooting through 4 daily phone calls.
- Visited rig sites for troubleshooting and solving issue.
- Has experience of both hands on tools and
- System related Admin work
- Identified issues, analyzed information and provided solutions to problems
- Good with SAP,Maps and Microsoft Office.
- Lead team
- Main duties were: Assigning daily tasks depending On operations requirement
- Managing daily activity
- Assigning MWD Cabins To Rigs depending on operations
- Demands
- Interpreted electric and electronic schematics and mechanical layouts to diagnose equipment problems.
- Installed electrical and mechanical equipment in accordance with National Electric Code.
- Adhered to testing procedures while performing standard and specialized evaluations on energized and de-energized circuits.
- Wrote, reviewed and edited technical document in accordance with template requirements.
- Interacted with subject matter experts to develop training material and tools for personnel.
- Used Microsoft Word and other software tools to create documents and other communications.
- Monitored company inventory to keep stock levels and databases updated.
- Collaborated with team members to achieve target results.
- Demonstrated respect, friendliness and willingness to help wherever needed.
- Created successful work schedules for each team member to maintain deadlines and fully staff shifts.
- Applied strong leadership talents and problem-solving skills to maintain team efficiency and organize workflows.
- Captured technical schematics for use in project planning and execution.
- Checked equipment to determine if maintenance was required.
- Wrote production reports to help senior leadership make accurate operational plans and decisions.
- Maximized resource utilization and achieved production targets by managing day-to-day usage of department resources.
- Maintained neat and clean work areas to maximize efficiency and safety.
- Prepared and implemented health and safety plans to protect employees and materials for construction projects.
- Communicated safety and environmental training material to employees and coached individuals on safety regulations and compliance
- Completed in-depth performance tests of parts and systems undergoing design optimization in simulated environments.
- Managed schedules, accepted time off requests and found coverage for short shifts.
- Worked flexible hours across night, weekend and holiday shifts
- Exceeded goals through effective task prioritization and great work ethic
- Drove operational improvements which resulted in savings and improved profit margins
- Completed paperwork, recognizing discrepancies and promptly addressing for resolution
- Saved $10000 monthly by implementing cost-saving initiatives that addressed long-standing problems
- Actively listened to customers' requests, confirming full understanding before addressing concerns
- Collaborated with team members to achieve target results
Electromechanical Technician
Baker Hughes
Dubai, Dubai
03.2017 - 04.2020
- Responsible for Maintenance, servicing and Inspection of all direction drilling,MWD and LWD tools by coordinating and understanding operational requirement.
- Has experience of both hands on tools and system related Admin work
- Good with SAP,Maps and Microsoft Office.
- Lead team
Main duties were: Assigning daily tasks depending on operations requirement
Managing daily activity
Assigning tools to Rigs depending on operations Demands
Planning jobs and tools
Performed final check on Maps and SAP regarding every tool
Working on reports and planning sheets
Preparing shift plan for team members
Trouble shooting issues related to tools and daily operations. - Performed thorough tests and inspections of completed products to check performance and compliance with design standards.
- Installed electrical and mechanical components with accuracy and efficiency.
- Operated hand and power tools safely to completed detailed work on various components.
- Assembled and maintained drilling tools.
- Developed and constructed electro-mechanical fixtures and assemblies.
- Generated daily Planning ,Cost and Efficiency reports to help with addressing design and production concerns.
- Resolved conflicts and negotiated mutually beneficial agreements between parties.
- Maintained excellent attendance record, consistently arriving to work on time.
- Drove operational improvements which resulted in savings and improved profit margins.
- Saved monthly $10000 by implementing cost-saving initiatives that addressed long-standing problems.
- Devoted special emphasis to punctuality and worked to maintain outstanding attendance record, consistently arriving to work ready to start immediately.
- Managed quality assurance program, including on-site evaluations, internal audits and customer surveys.
- Completed skilled soldering, corrections and wiring tasks to produce high-quality work.
- Observed equipment functioning to detect electronic and mechanical hazards or problems for service, repair or replacement.
- Maintained neat and clean work area to eliminate hazards.
- Liaised with staff to discuss equipment performance issues and formulate improvement ideas.
- Proposed layout and location modifications and installations in compliance with OEM, OSHA, NEC and company and local codes.
- Identified and specified required parts to repair and rebuild manufacturing equipment.
- Investigated electrical malfunctions with ammeter, multimeter and temperature probe test instruments to determine problems and apply solutions.
- Increased customer satisfaction by resolving Functional and Maintenance issues.
- Managed approximately 100 emails per day from customer and Management.
- Resolved tool maintenance and cost related problems, improved operations and provided exceptional client support.
- Observed equipment functioning to detect electronic and mechanical hazards or problems for service, repair or replacement
BOT Completions Technician
Baker Hughes
DUBAI, DUBAI
03.2016 - 02.2017
- Worked on Baker Oil Tools completions workshops for 11 months
- Work was receiving tool unloading tools from yard
- Disassembly of complete linear hanger running tools(BOT Completion Tool) which consists of
HRDE,Dog sub,flex sub,cements Head - Inspection and dimension check of all tools before and after assembling string.
- Assembly of complete linear hangers and casings
- Pressure testing for all sub assemblies of leaner hanger casing tools.
- Final dimension check and testing reports verification was performed
- Loading tools in basket.
- Great knowledge on completions as well Worked with Dubai Petroleum and ZADCO customers to understand needs and provide best service.
- Resolved conflicts and negotiated mutually beneficial agreements between parties.
- Managed quality assurance program, including on-site evaluations, internal audits and customer surveys.
- Drove operational improvements which resulted in savings and improved profit margins.
- Maintained excellent attendance record, consistently arriving to work on time.
- Managed ZADCO,Dubai Petroleum Customers
Intern
Baker Hughes
DUBAI, DUBAI
02.2015 - 06.2015
- Completed Final Year Project of Engineering on Drilling Systems Product Line in Baker Hughes.
- Witnessed how drilling tools are maintained in workshop
- Assembled and Disassembled Tools Like OnTrak,ASS Steering Unit,BCPM(Bidirectional Communication Power Module) and Final BHA(Bottom Hole Assembly)
- Participated in continuous improvement Projects-Kaizen
- Helped AMO Engineer on several cost saving projects
- Helped in setting up mini workshop.
- Upheld strict security procedures to maintain data confidentiality.
- Sorted, organized and maintained files
- Analyzed problems and worked with teams to develop solutions
Education
Bachelor of Science - Mechatronics Engineer
Manipal University
Dubai 09.2011 - 06.2015
Skills
- Team Work Collaboration
Team management
Technical Support
Operational improvement
Supervision
Project organization
MS Office
Drilling Equipment
Process improvement
Health Safety and Environmental
Driver's License
Failure Analysis
- Auto CAD
- Technician support
- Excellent Communication
- Training and Development
Interests
SPORTS
TRAVELLING
Timeline
AMO TECHNICIAN
ADNOC
03.2021 - Current
Electromechanical Technician
Baker Hughes
03.2017 - 04.2020
BOT Completions Technician
Baker Hughes
03.2016 - 02.2017
Intern
Baker Hughes
02.2015 - 06.2015
Bachelor of Science - Mechatronics Engineer
Manipal University
09.2011 - 06.2015