Hi, I’m
T. Vignesh
Oil And Gas Field Operator
Tirunelveli,Tamil Nadu
Overview
11
years of professional experience
4
English, Hindi, tamil, Malayalam
3
Diploma in mechanical engineering
Work History
Sam Fire Mumbai, ONGCMumbai
Production Operator
06.2012 - 04.2013
Job overview
- About 11 years in Oil and Gas field
Cairn Under Brunel
Field Operator
05.2014 - 08.2015
Job overview
- Brunel under contract Spectron Engineering
ADNOC Under contract
Field Operator
07.2015 - 08.2019
Cairn India contract
Production Operator
10.2015 - 01.2020
Cairn, L&T PVT LMT
Field Operator
12.2001 - 10.2022
AARVI ENCON LTD
02.2021 - 07.2027
Job overview
- MC037
- Sam Fire .jpg (JPEG Image, 2469 × 3504 pixels) — Scaled (30%) file:///C:/Users/Windows/Desktop/field%20op/MY%20DOCUMENT...of 2 6/22/2023, 12:21 PM
- Sam Fire .jpg (JPEG Image, 2469 × 3504 pixels) — Scaled (30%) file:///C:/Users/Windows/Desktop/field%20op/MY%20DOCUMENT...of 2 6/22/2023, 12:21 PM, Kondam
- Digitally signed by Santosh
Production Operator
02.2023
Job overview
- Schlumberger-PrivateSchlumberger-Private
- Course Completed
- SAFETY COURSE
- Permit to Work System (PTWS)
- Authorized Gas Tester (AGT)
- Safety Courses
- Fire Prevention and Fire Fighting(FPFF)
- Elementary First Aid (EFA)
- Personal Survival Techniques(PST)
- Personal Safety & Social Responsibilities
- Bosiet opito approved(Validity: 23-09-2025) UGK Medical Still valid
- JOB RESPONSIBILITIES:
- Agree commissioning scope
- Support design at: Hazard Study, P&ID reviews, Layout reviews, 3-D Model reviews
- Compile commissioning resource plan
- Determine handover philosophy
- Determine plant acceptance criteria
- Confirm product validation criteria
- Compile initial commissioning philosophy
- Systemize the plant
- Compilation of the commissioning manual
- Period for selection and appointment of the commissioning team
- Develop detailed commissioning plan
- Training period for the commissioning team
- Agree operating procedure production requirements by commissioning team
- Compile commissioning documentation
- Compile training manuals
- Compile Operating Procedures
- Commissioning schedule: Ⅱ
- Attendance at factory acceptance tests and inspections
- Train plant and maintenance operatives
- Check construction progress
- Test and clean pipe and equipment – per system
- Dry” functional tests (e.g
- Loop tests, rotating direction tests, cold alignments)
- Refractory dry out work requires a specific dry out process to avoid cracks because of evaporating water
- Leak tests (e.g
- Tubes of heat exchangers) to locate repair scope
- Leak tests of manholes prior to catalyst filling or for low pressure systems
- Schlumberger-PrivateSchlumberger-Private
- Special attention to flange surfaces
- Special attention to the gasket(s)
- Special attention to the tightening procedure
- Blowing, post-work cleaning, packing and internal installation
- Catalyst loading
- Reduction of catalyst: Most of the catalysts in ammonia plants are delivered in the oxidized form and must be reduced by application of hydrogen
- In most cases this commissioning step takes place after most parts of the plant have been commissioned and plant is in startup operation
- Lubricants, oils, cooling media etc
- In test plant utilities
- Electrical energization and utilities introduction sequentially
- Receive discipline approvals
- Punchlist – per system
- Loop testing – per devise, per system
- Motor rotation checks – per item within a system
- Turbine and compressors checks
- In many cases commissioning of turbines and compressors requires the availability of high and medium pressure steam
- Therefore, these commissioning activities, machine control and interlock tests are performed also during the start-up of the plant
- Leak testing – per system
- Drying of functional systems (Check for the quality of drying can be performed by measurement of dew point (recommendation below -20 C)
- Purging of functional systems
- Sequence check-out without chemicals
- Commissioning on safe chemicals, water commissioning – per system
- Utility system start – up o Instrument air system o Cooling water o Nitrogen grid o Steam for heat purposes
- Loop tuning within a system
- Testing of control sequence s, interlocks and shut-down systems on safe chemicals
- Heat tracings and heaters are taken into service
- Burners check: during the commissioning of the burners, control interlock sequences as well as performance parameters, like flame shape and colour are checked
- Lubrication units (joint check plant operator with vendor)
- Complete all PSSR paperwork and/ or Hazard Studies 4 and 5 – per system
- Issue first draft SOPs
- Start-up procedures
- Validation period
- Acceptance period
- Ramp up of production to design rate period
- On the job training of operations
- Handover to operations
- Consolidation period, updating of documentation with best operational
- Housekeeping adequate for start-up
- Floor and tripping hazards
- Scaffolding sufficiently removed / in place for start-up
AEL/Vedanta Ltd
01.2022 - 11.2022
Job overview
- TO WHOMSOEVER IT MAY CONCERN
- This is to certify that Mr
- Vignesh T was working with us on contract as
Vedanta Ltd
Production Operator
01.2020 - 10.2015
Job overview
- 2022 and was deputed to our client, at Barmer
- We wish him all the best for his future endeavors and relieve him from our service.
Narayan Kondam
SR. MANAGER HR
Job overview
- 11.2522:58 +05
Accomplishments
- Schlumberger-PrivateSchlumberger-Private
- Delayed jobs under control (working permits, fenced off without interfering with start-up activities, no works during critical stages)
- Adequate lighting
- General access to buildings and escape routes clearly identified
- Access for operations and maintenance
- Guarding of machinery
- Safety devices in operation (emergency stop devices, emergency showers, sprinklers)
- Insulation enough to avoid blockages in the process and critical exposure of people
- Sealed surfaces and pits cleaned / emptied to avoid contamination or blockage of sewer systems
- Position and tightness of drain valves checked
- Safety relieve systems like blow down systems or weep hole systems checked, burst discs in place; all transportation securities are removed
- Blinds removed from plant in a controlled and systematic way
- Orifice plates correctly mounted
- Lock, chains, seals and tags removed from valves
- Temporary gauges, valves, fittings and similar dismantled
- Caps, plugs and temperature element pockets are correctly fitted and equipped with thread tape
- Provisional utility connections and nitrogen hoses removed
- Connections to blind flanges removed
- Caps mounted
- Check interlock override list and shut down panel overrides according start-up procedures
- Bypass valves closed
- In case of an open bypass valve with “shut off” function the interlock is in “override” mode
- Labeling of valves, instruments, lines
- All modifications checked against Engineering Lead Documents
- Process Gas Compression Unit (PGC):
- Driver : Solar Gas Turbine Engine (Straight Flow Gas Turbine)
- Gas Compressor : Solar Compressor & Dresser Rand Compressor
- Capacity : 90 MMSCFD
- Operation and controlling of multistage centrifugal compressor driven by gas turbine engine
- Compressor normal star up and normal shutdown, monitoring and controlling of compressor parameter through PLC system (Allen Bradley& Honey well)
- Handling of compressor suction scrubber, pressure, Flow, Surges, Temperature, Vibration, Axial Displacement, fire and Gas safely system
- Gas Dehydration Unit:
- Familiarization of gas dehydration unit normal startup and normal shutdown of gas dehydration unit
- Handling of inlet coalesces separator or dehydration inlet scrubber, glycol dehydration contacts tower, glycol overhead scrubber, and gas / glycol heat exchanger (Tube and
- Shell type), monitoring and controlling of contactor pressure, glycol level and temperature, flow rate of lean glycol troubleshoot attending of dehydration unit
- Glycol Regeneration Unit:
- Handling of Re-boiler (kettle type and Fire Tube Re-Boiler Type), Lean /Rich glycol heat exchanger (Tube and Shell Type), glycol storage or surge tank, operation of booster pump and glycol re-circulation pump, operation of three phase glycol flash drum, glycol filter
- Schlumberger-PrivateSchlumberger-Private carbon filter, reflux coil, still column, stripping column, and monitoring and controlling of stripping gas flow, blanket gas for glycol flash drum, maintaining of Re-boiler temperature and glycol pH value
- Checking of pH twice a week, glycol analyzing
- Avoiding the glycol loss and foaming, maintain the glycol reboiler temperature
- Dehydrating medium Tri-ethylene glycol (TEG)
- Handling of gas dehydration unit 120 MMSCFD
- Produce water treatment unit:
- Operation and maintenance of Hydro-cyclone separator, Water Skimmer, Reject oil pump, backwash of hydro-cyclone, handling of Crude condensate Drum (CCD) and CCD pump
- Collecting of overboard water sample for analyzing of oil content in disposal water Maintaining of overboard sample 40 ppm
- Station Handling of Produce water 22,000 BBLS/Day
- Wellhead Operation and Maintenance:
- Wellhead operation in well head cluster and unmanned platform for individual well testing based on the use of 3 and 2 phase test separator, Well Equalizing, Optimization, Activation, and Experience in Gas Lifting, Water Injections, ESP (Electric Submersible Pump) SRP and
- Disposal wells
- Collecting well fluid sample and gas sample and analyzing, Well fluid water cut percentage of checking
- Changing surface adjustable choke, Positive choke bean up and down
- Changing of Daniel junior and senior Orifice
- Operation and maintenance of Christmas tree (BHEL, WKM, IKS, Cameron, kvaerner
- MMA, FMC) Monitoring and bleeding of Annulus pressure
- Handling of three pen chart recorder (Barton, Foxbro) Override of SCSSV with Fusible and Non Fusible Cap, SCSSSV and XSDV
- Flow back of new well, production deck housekeeping etc, Hands-over well for work over, well completion, wire-line jobs, PLT, Reservoir, FBHP,SBHP study job, live perforation job, and
- Acids jobs
- Unmanned wellhead platform ESD, FSD shutdown normalising through the Autocon
- Brisco and Ruelco well / fire / ESD shutdown panel board
- Pigging Operation:
- Monthly and quarterly as per plant program operating pigging oil line and gas line and water line all type of pigging operation
- Dose Batch # “Together, India will defeat
- COVID-19”
- In case of any adverse events, kindly contact the nearest health centre - Prime Minister Narendra Modi
- This certificate can be verified by scanning the QR code at http://verify.cowin.gov.in
- Certificate ID
- This certificate is compliant with WHO-DDCC:VS data dictionary
Interests
Beneficiary Reference ID
, Covid-19 Vaccination Certificate
Issued in India by Ministry of Health & Family Welfare, Govt of India
Vaccine Type
Manufacturer
Vaccine Name
Dose #
Date of Dose (YYYY-MM-DD)
Timeline
Production Operator
02.2023
AEL/Vedanta Ltd
01.2022 - 11.2022
AARVI ENCON LTD
02.2021 - 07.2027
Production Operator
Vedanta Ltd
01.2020 - 10.2015
Production Operator
Cairn India contract
10.2015 - 01.2020
Field Operator
ADNOC Under contract
07.2015 - 08.2019
Field Operator
Cairn Under Brunel
05.2014 - 08.2015
Production Operator
Sam Fire Mumbai, ONGC
06.2012 - 04.2013
Bwda Polytechnic College
Diploma In Mechanical Engineering from Mechanical Engineering
10.2009 - 04.2013
Field Operator
Cairn, L&T PVT LMT
12.2001 - 10.2022
SR. MANAGER HR
Narayan Kondam
Education
Bwda Polytechnic College Kaniykumari
Diploma In Mechanical Engineering from Mechanical Engineering
10.2009 - 04.2013
Work Preference
Work Type
Full TimeLocation Preference
On-SiteSkills
- Safety Meetings
- Operational Manuals
- Meeting Participation
- Valve and Pump Repairs
- Maintaining PPE
- Critical Thinking
- Learning Techniques
- Equipment Maintenance
- Scheduled Maintenance
- Water Injection
- Safety Knowledge
- Team Meetings
- Daily Progress Reports
- Daily Facility Operations
- Workplace Safety