UDAY INDULKAR

Current Project:

1. MARATHON PETROLEUM COMPANY, ILLINOIS

CRUDE UNIT AREA-GREEN FIELD/BROWN FIELD

Responsibilities:

Ø Working as Area lead for Crude unit area from FEED Phase to Detail phase.

Ø Development of atmospheric overhead exchangers technological structure.

Ø Development of Equipment/ Piping layout for atmospheric overhead exchangers.

Ø Column nozzle orientation(New section & old section) & development of tower piping layout.

Ø Column support bracket schedule development & column Platform designing.

Ø Tie-in Piping modelling by using LFM in S3D.

Ø Identification of Demolish piping from Demo pid & modelled by using LFM in S3D.

Ø IDC checking from various disciplines.

Ø All equipment Vendor drawing checking & commenting.

Ø IFC isometric checking for isometric issuance.

2. C3 SPLITTER DEBOTTLENECK PROJECT-MOTIVA

LIGHT OLEFINS UNIT-PORT ARTHUR CHEMICALS

Responsibilities:

Ø Development of Small-bore Piping layout as per pid.

Ø Column nozzle orientation & tower support bracket schedule development.

Ø IDC checking from various disciplines.

Ø Equipment Vendor drawing checking & commenting.

Ø Tag closing activity 90% IMR & CMR.

Ø IFC isometric checking for isometric issuance.

3. DIAMOND GREEN DIESEL, PORT ARTHUR, TX REFINERY

SAF FRACTIONATION UNIT

Responsibilities:

Ø Development of Large bore Piping layout as per pid.

Ø Column nozzle orientation, layout development & support bracket schedule. development & interaction with vendor for comments resolution.

Ø IDC checking from various disciplines.

Ø Equipment Vendor drawing checking & commenting.

Ø PID Markup & tracking of MOC.

1. HINDUSTAN PETROLEUM CORPORATION LMITED.

SECOND GENERATION ETHANOL BIO-REFINERY.

Responsibilities:

Ø Development of Equipment & Piping layout for Distillation & Dehydration Unit..

Ø Preparation & Checking of MTO for issuing to Client.

Ø IDC checking from various disciplines & Vendor drawing checking & commenting.

Ø Involvement & successful completion of 30%, 60% CMR as a Unit Lead.

2. BRITISH PETROLEUM

Mauritania & Senegal Region Tortue Phase 1(Offshore)

Responsibilities:

Ø Development of Piping layout for FPSO Topside area on E3D AVIVA software.

Ø DMS preparation for p&id development from IFD stage to IFC.

Ø IDC checking from various disciplines & Vendor drawing checking.

Ø Development of Piping layout for 30% & 60% Client Model Review.

3. INEOS (DEBOTTLENECKING PROJECT, TEXAS USA)

(Green Field & Brown Field scope to increase the capacity of existing facility)

Responsibilities:

Ø Development of Piping layout for Green Field area on SP3D.

Ø Preparation of Hydraulic circuit packages by using existing piping GA’s.

Ø Development of Piping layout for Brown Field area using existing GA’s & as per Tie-in sketches received from site office on SP3D.

Ø On Deputation to Houston (US) officefor Field verification activity for 6 months.

4. ESSAR OIL LIMITED (Sour Water Stripper-1 Unit)

Successfully completed SWS-1 Unit as a Area Lead without any revisions & well appreciated by Client.

Responsibilities:

Ø Development of Unit Plot plan for Sour Water Stripper-1 Unit.

Ø Development of Piping layout on PDS for 30% & 60% & 90% Client Model Review.

Ø Development of various Piping Deliverables.

Ø Preparation & Checking of MTO for issuing to Client.

Ø MOC preparation for p&id development from IFD stage to IFC.

Ø Involvement & successful completion of 30%, 60% & 90% CMR as a Unit Lead.

Ø IDC checking from various disciplines & Vendor drawing checking.

5. Reliance Industries Limited (Ethane Cracker Modification Project-DMD)

Responsibilities:

Ø Preparation of Estimate MTO.

Ø Layout Development Based on TIE-IN information from site on SP3D.

Ø Layout Development & Physibility check on site for new lines routing.

Ø MOC preparation for p&id development from IFD stage to IFC.

Ø Involvement in 60% & 90% Client Model Review.

Ø IDC checking from various disciplines & Isometric checking for IFC.

Ø Site co-ordination with site people for various inputs for layout development.

6. Chevron Phillips Chemical Company (Polyethylene project)

Responsibilities:

Ø Layout Development for Loop Reactor area.

Ø Finalizing various systems like Kill system, Catalyst feed system, Moderation system & isobutene system for Loop Reactor area in discussion with Houston office.

Ø Modeling of Small-Bore lines as per p&id using PDS.

Ø Vendor print review of Skid Drawings & commenting.

Ø Checking of IDC Dwgs & Commenting.

Ø Involvement in 90% Internal Model Review & Client Model Review.

Ø Checking & Issuing of IFC Isometrics.

Previous Company: Petrofac OEC, Saudi Arabia

Position: Senior Piping Designer from May 2013 to July 2014

Project handled:

1. RABIGH PHASE II PETROCHEMICAL PROJECT.

Responsibilities:

Ø Modeling of equipment and lines as per p&id using PDS.

Ø Preparation of nozzle orientation of equipment’s.

Ø Vendor print review of equipment’s & commenting.

Ø Checking & Preparation of IDC markup of P&id’s.

Ø Checking & Issuing of IFC Isometrics.

Ø Preparation & issuing of piping GA Drawings.

Previous Company: Reliance Port & Terminals Ltd, Navi Mumbai, Maharashtra

Position: PDS Piping Designer from Nov. 2011 to April 2013

Project handled:

1. PBR-1, NEW FINISHING LINE, VMD, GUJRAT, INDIA.

Responsibilities:

Ø Preparation of Equipment layout as per existing plot plan.

Ø Basic layout study as per existing GA’s.

Ø Preparation of bulk, final MTO for Estimation.

Ø Modeling of equipment and lines as per p&id using PDS.

Ø Preparation of nozzle orientation of equipment’s.

Ø Preparation of bulk, final MTO for Estimation.

Ø Vendor print review of equipment’s & commenting.

Ø Preparation of ducting layout based on existing layout.

Ø Checking & Issuing of IFC Isometrics.

Previous Company: IBI CHEMATUR India Pvt Limited, Mumbai, Maharashtra

Position: Sr. PDS Designer from April 2011 to Oct 2011

Project handled:

1. GNFC (Gujarat & Narmada Fertilizers Company), Gujarat, India.

Responsibilities:

Ø Modeling of small bore lines on SP3D.

Ø Pipe supporting of large bore & small-bore lines as per support standard on SP3D.

Ø Checking & Markup of p&id’s.

Ø Checking & Issuing of Isometric.

Previous Company: Bechtel India Pvt Limited, Gurgaon, Haryana

Position: Piping Design Engineer from Dec 2010 to April 2011.

Projects handled:

1. Abu Dhabi Oil Refining Company-Takreer CBDC (Feed Project)

Responsibilities:

Ø Preparation of Equipment layout as per basic process p&ids.

Ø Preparation of standard piping drawings.

Ø Preparation of bulk, final MTO for Estimation.

Previous Company: Shaw Rolta India Ltd., Mumbai, Maharashtra

Position: Piping Design Engineer from March 2008 to Dec 2010

Projects handled:

Responsibilities:

Ø Development of Pump piping, column piping, Exchanger piping, Drum piping etc.

Ø Preparation of bulk, final MTO.

Ø Modeling of Equipments and lines using PDS.

Ø Preparation of piping GA drawings.

Ø Checking & Markup of p&id’s.

Ø Checking & Issuing of Isometric.

Ø Clash checking & RDB updation.

Ø Involvement in Interdisciplinary & Client review with project leads.

Ø Client Review Tag resolving & closing activity.

Ø Co-ordination with the other Engineering Departments.

Ø Shop & Field RFI to resolved & update isometric & model accordingly.

Previous Company: SNC Lavalin India Ltd, Mumbai, Maharashtra

Position: Piping Designer from Oct 2006 to March 2008

Projects handled:

1. Rabigh Refining & Petrochemical Company, Saudi Arabia

2. Reliance Industries Limited

Responsibilities:

Ø Modeling of equipment’s and lines as per p&id’s on PDS.

Ø Preparation of Equipment layout & Piping layouts as per process requirement.

Ø Nozzle orientation of equipment’s.

Ø Checking & issuing of lines Isometric.

Ø Extraction of piping layouts through drawing manager on PDS.

Previous Company: Chemtex India Ltd, Bangalore

Position: Piping Designer from Oct 2005 to Sep 2006

Projects handled:

Responsibilities:

Ø Modification of equipment as per vendor dwgs on PDS.

Ø Modelling of small bore lines as per p&id’s on PDS.

Ø Checking & issuing of small bore lines Isometric.

Ø Extraction of piping layouts through drawing manager on PDS.

Ø Checking & issuing of piping layouts.

Previous Company: Petron Eng. Private Ltd., Mumbai, Maharashtra

Position: Piping Designer from May 2004 to Aug 2005

Projects handled:

1. IOCL Panipat Refinery Expansion Project (Off site unit), Haryana, India

Responsibilities:

Ø Preparation of Isometric, Manually & on AutoCAD.

Ø Preparation of as built Isometric, Manually & on AutoCAD.

Ø Study of D.C.N. as per site requirement.

Ø Site sketching activity for preparation of existing isometrics.

Previous Company: Manu Tech Associates, Thane, Maharashtra

Position: Piping Designer from Sep 2001 to April 2004

Projects handled:

1. B.C.C. Limited (UHDE India Ltd)

2. U.S.V. Limited (UHDE India Ltd)

3. Gharda Chemicals Ltd, Dombivali, Thane, Maharashtra

Responsibilities:

Ø Preparation of bulk, final MTO.

Ø Preparation of Equipment layout & Piping layout.

Ø Basic piping study & training.

Ø Software training like Autocad & PDS.