Summary
Overview
Work History
Education
Skills
Mother's Name
Personal Information
Languages
Hobbies and Interests
Disclaimer
Father's Name
Mobile Numbers
Accomplishments
Timeline
Generic

Yogikiran J Parmar

Surat

Summary

Accomplished Mechanical Engineer with a robust background in mechanical maintenance and project management, notably at Reliance Industries Ltd. Expert in rotating and static equipment, and a proven track record in enhancing equipment reliability and safety compliance. Skilled in resource planning and budget preparation, with a focus on achieving over 90% equipment availability.

Overview

14
14
years of professional experience

Work History

Lead Maintenance - Mechanical

Reliance Industries Ltd
Hazira
08.2015 - Current
  • Mechanical maintenance of a 372 MW coal-based captive power plant and execution of a turnaround shutdown of different petrochemical plants.
  • 5 x 500 TPH IR-CFBC with U-Beam technology (M/s THERMAX - India), boilers working at a pressure of 121 bar and a temperature of 525°C.
  • 4 X 94.3 MW STG (Make-BHEL) and its auxiliaries, like the lube oil system, HPSU, HP and LP heaters, condensate system, deaerators, and boiler feed water pumps.
  • 4 x 11,000 CMH cooling tower and its auxiliaries, like the side stream filter unit, chlorination system, and H2SO4 dosing system.
  • Close Cooling Water System, Auxiliary Cooling Water System, PHEs, and Instrument Air System - Screw Air Compressor (4 X 2957 Nm3/hr, 10 Kg/cm2, Make - Atlas Copco) and Centrifugal Compressor.
  • Coal handling plant with a storage capacity of 160,000 cubic meters and lime handling plant with a storage capacity of 10,300 cubic meters.
  • Supervise the installation, construction, fabrication, testing, and erection of various mechanical equipment and piping systems.
  • Quality checks as per QAP, codes, standards, and good engineering practices.
  • Provide assistance for pre-commissioning, commissioning of constructed facilities, and troubleshooting of the same, including coordination with OEMs.
  • Construction management, including job and resource planning, quality control, safety, site supervision, etc.
  • Prepares punch list reports and determines corrective measures for on-site problems.
  • Ensuring safe working conditions
  • Prevention of hazardous conditions for personnel and equipment.
  • Erection of IBR, non-IBR piping as per P&ID, isometrics, and as per ASME standards.
  • Conducting a hydro test of piping, its flushing, and normalization.
  • Maintenance of all rotary equipment, like steam turbines, generators, screw compressors, high-pressure boiler feed pumps, horizontal and vertical centrifugal pumps, positive displacement pumps, cooling tower fans, gearboxes, root blowers, conveyors, etc.
  • Maintenance of all static equipment, like tanks, vessels, heat exchangers, pressure safety/relief valves, pressure seal bonnet valves, and all types of valves.
  • Preparation of SMPs, equipment service sheets, installation, and overhauling check sheets for all rotary equipment.
  • Planning and making a schedule for preventive, predictive, and breakdown/shutdown maintenance jobs.
  • Supervision and execution of mechanical maintenance tasks to ensure quality, timely completion, and adherence to planning.
  • Supervise and mobilize resources for day-to-day mechanical maintenance activities, as well as shutdown jobs, as per planning.
  • Conduct regular troubleshooting and analysis when appointed as a member of the RCA team.
  • Carry out preservation activities and LLF as per plan.
  • Facilitate and support minor projects and modifications as per recommendations.
  • Ensure compliance with procedures and best practices.
  • Ensure improvement in the availability of equipment.
  • Maintain the integrity of Maintenance SAP-PM and SAP-MM data, analysis, and costs by timely and correct data entries and validations.
  • Identify and interact with workshop for repairs activities
  • Codifications of spares, inventory modeling, preparation/updating of BOM, PR creation, and follow-up of PO and inspections of spares received.
  • Prepare the mechanical maintenance budget for the assigned equipment area.
  • HSEF compliance (RESOP, MIQA, CFA, mandatory training).
  • Execution of various Modification in STGs and BOP as required to enhance performance and reliability of equipment like STG - Bearing & Inner Casing Modification, HPSU & Lube oil System modification etc

Mechanical Maintenance Engineer

Nirma Ltd
Kalatalav
09.2010 - 07.2015
  • Maintenance of following equipment: 2 & 23 MW, 16.34 MW & 6.5 MW Steam Turbine Generator set
  • 4 x 100 TPH & 1 x 200 TPH CFBC boilers
  • Air Compressors & Co2 Gas Compressor
  • Different types of Pumps like Boiler Feed Pump (M/s
  • SULZER - 05 Nos
  • And M/s
  • Kirloskar - 03 Nos.) & Vertical Turbine Pump-8750 M3/Hr
  • - 05 nos.Make: Kirloskar
  • Handling break down Shut down and regular maintenance of Boilers and Auxiliary of its like BFP, fan, blowers etc
  • Tube leakages identification, attending and Hydro-testing of Boilers
  • Maintenance of screw compressors like-3 X 7200 m3/hr Oil free air compressors (Atlas Copco), 3 X 2200Nm3 air compressors (IR) and 4 X 6700 m3/hr for CO2 gas compression & 3 X 1250 Nm3 (IR)
  • Maintenance of pumps like -Boiler Feed Pump (M/s
  • SULZER - 05 Nos
  • And M/s
  • Kirloskar - 03 Nos.) & Vertical Turbine Pump-8750 M3/Hr
  • - 05 nos
  • Make: Kirloskar
  • Critical spare management and Predictive, Schedule, preventive and Breakdown maintenance activities
  • Experience in handling turnaround or major shut down planning and execution of shutdown jobs
  • Drawing and modification of different parts so as to decrease failures of parts
  • Improve & update the maintenance (preventive & predictive) program regularly
  • Identify, update & continuously improve equipment reliability
  • Identify, select & update the required spare part list

Education

Post Graduate Diploma - Industrial Safety

Technical Education Board
Gujarat
05.2022

Bachelors of Engineering - MECHANICAL ENGINEERING

Bhavnagar University
06.2010

Skills

  • Mechanical maintenance of rotating equipment, like pumps, steam turbine generators, compressors, fans, blowers, belt conveyors, gearboxes, and impact crushers
  • Static equipment like IR-CFBC boilers, pressure vessels, heat exchangers, Pipings & Valves etc
  • Statutory Compliance like IBR ,GFR,Safe Working Conditions of Plants
  • Condition Monitoring
  • Project management
  • Troubleshooting
  • Safety compliance
  • Budget preparation
  • Resource planning
  • Erection and commissioning
  • Inventory Management

Mother's Name

Chandrikaben Parmar

Personal Information

Date of Birth: 04/23/89

Languages

  • English
  • Hindi
  • Gujarati

Hobbies and Interests

  • Reading
  • Writing articles
  • Elocution
  • To play drama
  • Stage performance

Disclaimer

I hereby declare that the information furnished above is true to the best of my knowledge.

Father's Name

Jagdishbhai Parmar

Mobile Numbers

  • +91-7016109943
  • +91-9586195613

Accomplishments

    Successfully resolved various problems faced during the erection and commissioning of a 372 MW Captive Power Plant.

    Successfully executed inner casing modification of 4 x 93 MW STGs to resolve subsynchronous vibration.

    Achieved risk reduction and energy savings through various Management of Changes (MOCs), such as fly ash line replacement from ACI to CS, ejector installation in ammonia dosing, and cooling tower fan power reductions.

    Successfully co-fired biomass with coal as a greener energy initiative.

Timeline

Lead Maintenance - Mechanical

Reliance Industries Ltd
08.2015 - Current

Mechanical Maintenance Engineer

Nirma Ltd
09.2010 - 07.2015

Post Graduate Diploma - Industrial Safety

Technical Education Board

Bachelors of Engineering - MECHANICAL ENGINEERING

Bhavnagar University

Similar Profiles

CREATE PROFILE
Yogikiran J Parmar