Avadhut Pawar
Sangli
Summary
Assistant Manager with a proven track record at Techsol Engineering Services, enhancing customer satisfaction through effective problem-solving and technical consistency. Expert in CNG compressor maintenance and shift scheduling, I thrive on delivering results while fostering team collaboration and trust. Committed to continuous learning and operational excellence.
Overview
11
11
years of professional experience
Work History
Assistant Manager
Techsol Engineering Services (I) PVT. LTD
Mumbai
01.2024 - Current
- Improved customer response, complaint resolution, and client satisfaction through faster support.
- Resolved customer questions and complaints promptly, enhancing client satisfaction.
- Implemented monitoring processes for customer satisfaction trends.
- Managed shift rosters and duty coverage to keep daily operations on track.
- CNG compressor training given to Technical Team.
- Attended Clients Meeting and improved service level of Organisation
- Kept daily operations consistent through shift scheduling and duty coordination.
- Supported preventive maintenance and breakdown planning for CNG compressors by coordinating manpower schedules.
- Managed CNG compressor maintenance for online stations and mother station under Mahanagar Gas in GA-2, GA-3, and KDAB zones.
- Prepared operational and maintenance reports for CNG activities.
- Maintained accurate employee records through attendance, timekeeping, and payroll support.
- Followed safety regulations and company policies to uphold workplace standards.
- Followed safety regulations and company policies to safeguard workplace standards.
- Guided junior staff on daily tasks, projects, and work priorities to build their capabilities.
- Coached junior staff on daily tasks, projects, and objectives.
- Developed junior staff capability through guidance on daily tasks, projects, and objectives.
- Collaborated with management on strategic planning to advance business goals.
- Contributed to strategic planning with management to advance business goals.
- Supported development of operational strategy for efficient, productive operations.
Senior Engineer
Techsol Engineering Services Pvt Ltd
Kolhapur
03.2023 - 01.2024
- Managed maintenance activities for CNG compressors at online stations and mother station under HPOIL Gas Pvt Ltd and Bharat Petroleum Corporation Limited City Gas Distribution across Sangli, Satara, and Kolhapur GA.
- Compiled monthly reports on breakdown hours, consumption, availability, and safety for operational review.
- Planned operator field training and safety training programs to strengthen site readiness.
- Organized client meetings to enhance communication, address concerns, and follow up on issue resolution.
- Reviewed daily progress reports and conducted fault finding for mass flow meters to ensure operational reliability.
- Resolved package instrument issues, completed fault diagnosis, and contributed to instrument calibration.
- Developed special tools and tackles required for top overhaul and major overhaul activities.
- Performed fault diagnosis for Cummins GTA 855 and G 855 engines and Intermech three-stage reciprocating gas compressor.
- Oversaw activities related to CP make and KPCL make 650 & 1200 SCMH engine-driven and electric motor-driven CNG gas compressors.
- Monitored spare inventory levels and recorded monthly spare consumption.
- Delivered maintenance support for CNG compressors at online stations and mother station under HPOIL Gas Pvt Ltd and Bharat Petroleum Corporation Limited City Gas Distribution across Sangli, Satara, and Kolhapur GA.
- Produced monthly breakdown-hourly, consumption, availability, and safety reports.
- Enabled operator field training and safety training for site personnel.
- Assisted in client meetings by preparing materials and documenting discussions. and ongoing coordination.
- Improved daily progress monitoring and fault finding for mass flow meters.
- Restored package instrument performance through fault diagnosis, issue resolution, and calibration support.
- Completed special tools and tackles preparation for top overhaul and major overhaul work.
- Resolved faults on Cummins GTA 855 and G 855 engines and Intermech three-stage reciprocating gas compressor.
- Maintained operational support for CP make and KPCL make 650 & 1200 SCMH engine-driven and electric motor-driven CNG gas compressors.
- Delivered spare stock updates and monthly spare consumption calculations.
Engineer
Rhino Services Pvt Ltd
Pune
09.2021 - 03.2023
- Supported service operations for CNG compressor maintenance and operation at Rhino Services, Pune, across Maharashtra Natural Gas Limited and Torrent Gas sites.
- Assisted commissioning activities for Chicago Pneumatics and Kirloskar Pneumatic CNG compressor packages.
- Executed package unloading, rain hood installation, foundation leveling, grouting, and precise axial and radial alignment of engine and compressor main shafts during compressor startup to ensure optimal performance.
- Diagnosed and resolved faults on 1200 and 2000 SCMH CP make three-stage reciprocating gas compressors, addressing compression issues, intercooling defects, piston bumping, clearance settings, and Emerson mass flow meter problems to enhance operational reliability.
- Performed maintenance on Cummins GTA 855 gas engines for 1200 and 2000 SCMH applications, including tappet setting, 12K-hour top overhaul, 24K-hour major overhaul, timing calibration with a stroboscope, fuel system tuning, PRV adjustment, and ignition fault checks for Altronic units and spark plugs.
- Utilized Cummins GTA 855 gas engines to support 1200 and 2000 SCMH operations.
- Applied knowledge of engine fundamentals and operating principles across key engine components and systems.
- Adjusted intake and exhaust valve clearances with tappet setting procedures.
- Completed 12K-hour top overhaul and 24K-hour major overhaul activities.
- Set engine timing using stroboscope for accurate calibration.
- Adjusted fuel system settings, including carburetor air-fuel ratio for rich, lean, and stoichiometric conditions.
- Adjusted PRV settings and tuned fuel flow for engine efficiency.
- Inspected ignition system components, including Altronic units and spark plugs, and diagnosed faults.
- Directed service support for CNG compressor operation and maintenance at Rhino Services, Pune, across Maharashtra Natural Gas Limited and Torrent Gas locations, ensuring seamless operations and adherence to safety standards.
- Coordinated commissioning for Chicago Pneumatics and Kirloskar Pneumatic CNG compressor packages.
- Managed unloading, rainhood installation, foundation leveling, grouting, and axial and radial shaft alignment during compressor startup.
- Resolved operating issues on 1200 and 2000 SCMH CP make three-stage reciprocating gas compressors, covering compression faults, intercooling defects, piston bumping, stage clearance setting, and Emerson mass flow meter problems.
- Maintained Cummins GTA 855 gas engines for 1200 and 2000 SCMH service, covering tappet setting, 12K-hour top overhaul, 24K-hour major overhaul, stroboscope timing calibration, fuel tuning, PRV adjustment, and ignition fault diagnosis for Altronic units and spark plugs.
- Supported Cummins GTA 855 gas engine service for 1200 and 2000 SCMH compressor applications.
- Applied engine operating knowledge to troubleshoot components and system-level issues.
- Performed valve clearance adjustment for intake and exhaust valves.
- Completed 12K-hour top overhaul and 24K-hour major overhaul work.
- Calibrated engine timing with a stroboscope for correct synchronization.
- Set carburetor air-fuel ratio and adjusted fuel system for rich, lean, and stoichiometric conditions.
- Adjusted PRV settings and tuned fuel delivery for proper engine operation.
- Checked Altronic ignition units and spark plugs and diagnosed related faults.
- Delivered reliable CNG compressor support at Rhino Services, Pune, across Maharashtra Natural Gas Limited and Torrent Gas sites.
- Achieved smooth commissioning for Chicago Pneumatics and Kirloskar Pneumatic CNG compressor packages.
- Achieved accurate unloading, rain hood installation, foundation leveling, grouting, and shaft alignment during compressor startup.
- Resolved compressor performance faults on 1200 and 2000 SCMH CP, made three-stage reciprocating gas compressors, including stage compression issues, intercooling problems, piston bumping, clearance setting, and Emerson mass flow meter faults.
- Maintained Cummins GTA 855 gas engines for 1200 and 2000 SCMH applications through tappet setting, 12K-hour top overhaul, 24K-hour major overhaul, timing calibration with stroboscope, fuel tuning, PRV adjustment, and ignition fault checks for Altronic units and spark plugs.
- Supported Cummins GTA 855 gas engine operations in 1200 and 2000 SC MH applications.
- Handled engine fundamentals and operating principles for key system components.
- Completed intake and exhaust valve clearance setting.
- Completed 12K-hour top overhaul and 24K-hour major overhaul activities.
- Completed timing setting with stroboscope for correct engine synchronization.
- Completed carburetor air-fuel ratio setting and fuel adjustment for rich, lean, and stoichiometric conditions.
- Completed PRV setting and fuel tuning for engine stability.
- Completed ignition fault diagnosis for Altronic units and spark plugs.
Technitian
Awati Motors (Maruti Suzuki's Authorised Service Station)
Sangli
04.2016 - 05.2017
- Executed repairs on engine, clutch, gearbox, differential, propeller shaft, and axle, contributing to overall vehicle performance.
- Coordinated suspension work, wheel alignment, wheel balancing, and tire rotation services to ensure optimal vehicle handling and safety.
- Managed preventive maintenance activities for Maruti Suzuki vehicles, ensuring compliance with service schedules to enhance vehicle reliability.
Education
Bachlor's Technology - Automobile Engineering
Annasaheb Dange College Of Engineering &Technology
Ashta, Sangli06-2021
Diploma - Automobile Engineering
Pad. Vasantdada Patil College of Engineering & Technology
Budhgaon, Sangli06-2016
HSC -
Swami Ramanand Vidyalaya And JR College
Ramanandnagar07-2014
Skills
- Technical reliability
- Decision making
- Continuous improvement
- Technical documentation
- Data analysis
- Presentation development
- AutoCAD
- CATIA
- Unity Pro
- Prolink-3
- CNG compressor maintenance
- Engine overhauling
- Maintenance reporting
- Spare inventory management
- Safety compliance
- Clear communication
- Team leadership
- Customer support
- Cost management
- Operational strategy
- Client relationship management
Personal Information
- Title: CNG Operation And Maintenance Engineer
- Date of Birth: 1997-02-14
- Gender: Male
- Nationality: Indian
- Marital Status: Married
Languages
Marathi, Hindi, English
Declaration
I, Avadhut Pawar, hereby declare that the information contained herein is true and correct to the best of my knowledge and belief. Place: Ramanandnagar, Maharashtra
Personal Details
Father's Name: Mr. Rajaram Pawar
Timeline
Assistant Manager
Techsol Engineering Services (I) PVT. LTD
01.2024 - Current
Senior Engineer
Techsol Engineering Services Pvt Ltd
03.2023 - 01.2024
Engineer
Rhino Services Pvt Ltd
09.2021 - 03.2023
Technitian
Awati Motors (Maruti Suzuki's Authorised Service Station)
04.2016 - 05.2017
Bachlor's Technology - Automobile Engineering
Annasaheb Dange College Of Engineering &Technology
Diploma - Automobile Engineering
Pad. Vasantdada Patil College of Engineering & Technology
HSC -
Swami Ramanand Vidyalaya And JR College