Nivas Kumar

· LIAISONING WITH JBVNL REPRESENTATIVE FOR SMOOTH IMPLEMENTATION OF NFMS PROJECT.

· REPRESENTING RELATED TO NFMS SCOPE AND OBJECTIVE LIKE MONITORING FOR POWER RELIABILITY PARAMETER SUCH AS SAIFI, SAIDI, HOUR OF SUPPLY ETC.

· MONITORING FOR POWER QUALIT PARAMETER SUCH AS VOLTAGE LEVEL, POWER FACTOR, AND FREQUENCY ETC.

· ENABLING INPUTS FOR DISCOM RATING, NETWORK PLANNING, LOAD MANAGEMENT, ENERGY ACCOUNTING ETC.

· ENABLING MACHINE TO MACHINE (M2M) DATA TRANSFER FROM FIELD EQUIPMENT TO THE SERVER AND DATA PROCESSING UNIT WITHOUT ANY MANNUAL INTERVENTION.

· THERE ARE MAILY 03/04 TYPES OF API TO BE DEVELOPED FOR (M2M) DATA TRANSFER LIKE-MASTER DATA API, METER TRANSTATIONAL DATA API, ALARM API AND OUTAGE SCADA/AMR RESPECTIVELY.

· THE MASTER DATA API HAVE 04 TYPES –INSTALL, REMOVE, REPLACE,CHANGE.

· THE METER TRANSTATIONAL DATA API HAVE 04 TYPES LIKE-BLOCK LOAD PROFILE, DEVICE EVENT, DAILY PROFILE, BILLING PROFILE.

· THE ALARM API 02 TYPES LIKE-AMR,SCADA/RT-DAS

· THE OUTAGE API HAVE EITHER PLANNED OR UNPLANNED.

· UPTO HIGHER AUTHORITY AS WELL AS LOWER EMPLOYEE.

· SECHEDULING MEETING TIME TO TIME ALONG WITH UTILITY AND ITS SYSTEM INTEGRATOR FOR INTEGRATION WITH NFMS.

· PROVIDING GUIDANCE TO UTILITY STEP BY STEP HOW TO COMES IN INTEGRATION PROCESS.

· AFTER SUCCESSFUL INTEGRATION THE DATA WILL BE ANALYSED AND IF ANY COREECTION IS REQUIRED FROM UTILITY SIDE AS WELL AS OUR DEVELOPMENT SIDE WILL BE CROSSPONDANCE WITH EACH OTHER AND TAKING NECESSARY ACTION TO RESOVED ISSUE ON GIVEN TIME.

· UPDATION OF PROGESS TO UTILTY HIGHER AUTHORITY LIKE M.D, DIRECTOR ON WEEKLY BASIS.

· SUPERVISION OF AMISP PROJECT WHILE IMPLEMENTATION OF RDSS.

· M2M INTEGRATION OF FEEDER CO ORDINATION WITH OUR CORPORATE OFFICE IT TEAM AS WELL AS JBVNL AND FMS AGENCY WHILE SMOOTH INTEGRATION.

· UPDATION OF PROGESS ALONG WITH RDSS NODEL AS WELL AS UTILLITY M D AND OUR CORPORATE OFFICE ON DAILY BASIS.

· PROVIDING ASSISTANCE AND INFORMATION TO UTILITY.

· SURVEY OF ELECTRIFICATION WORK DTR WISE WHICH COMES UNDER NHAI ROW AREA AS PER PROJECT SCOPE.

· DPR PREPARETION IN ACCORDANCE WITH EXISTING AND NEW WORK PERPOSAL UNDER PROJECT.

· COMPETENT UTILITY AUTHORITY APPROVAL FOR DPR AND DRAWINGS.

· MATERIAL INSPECTION AT SITE & FACTORY LIKE-POLES, CABLES, CONDUCTOR,INSULATORS, TRANSFORMER,HARDWARE FITTINGS.

· PREPARATION OF ERECTION PLAN ALONG WITH OUR TEAMS AND MAKE PRIORITY BASIS AS GIVEN BY CLIENT.

· PREPARTION OF INDENT FOR MATERIAL ISSUE FROM OUR CENTRAL STORE.

· RECHECK SURVEY BEFORE START ERECTION WORK.

· SHIFTING OF EXTING DTR,POLES,CABLES CONDUCTOR,TOWERS FROM ROW NHAI WORKING AREA TO THE CORNER OF NHAI CORIDOR (2 MTR) AND ERECTED NEW POLES,CABLES,CONDUCTOR AND UG CABLE.

· SHIFTING OF 220 KV M/C ROHTAK –MULDANA LINE TOWERS/ 220 KV DOUBLE CIRCUIT PANIPAT –NARELA TOWER/400 KV DOUBLE CIRCUIT KABULPUR-DEEPALPUR LINE TOWERS ETC. OF BBMB,HVPNL RESPECTIVELY FROM NHAI WORKINHG AREA TO OUT FROM THE NHAI CORRIDOR FOR CONSTRUCTION OF 4 LANE NH-334B ROHANA TO HARYANA BORDER/U.P IN STATE OF HARYANA.

· RESOLVE ROW ISSUE/HINDRANCE BY LOCAL PEOPLE.

· PREPARATION OF JMC (JOINT MEASUREMENT SHEET).

· COMPLIANCE RECTIFICATION GIVEN BY NHAI AS WELL AS UTILITY.

· HANDING OVER –TAKING OVER PROCEDURE.

· PREPARATION OF CLOSER DOCUMENT.

• Erection & Shifting of 0.4Kv,11kv, 33kv line, UG cable and prepare estimate
• Shifting of 765 KV Meerut-Moga TL,400 KV double ckt Kaithal-Baghpat TL,400 KV double ckt Kurushetra-Jind TL at NH-152 D While construction of 6-Lane Expressway
• Liaising with client/Project Management consultant / Vendor for materials,BOQ and project relevant documents approval
• Quality and safety checking during work execution
• Take approval of GTP, GA drawings from clients
• Planning, Billing, site management, client team management
• Prepare BOQ, material planning, client Bill (supply & erection) and contractor Bill
• Prepare GA drawing, single line diagram (SLD) and others technical drawing and take approval from client
• Prepare daily/weekly/monthly progress report and short & long term plan to enhance operation
• Ensure a safe working environment for Worker and materials.

• Erection of 33kv lines, 11kv lines & LT line etc
• Laying of HT XLPE cable(3cx300sqmm) by HDD machine and manually via HDPE pipe and GIpipe
• GPS Survey & Study and prepare single line diagram, layout, & other technical drawings to execute the work accordingly with safety and quality
• Preparation of BOQ and Joint measurement certificate(JMC)
• Preparation of Sub-contractor billing and reconciliation
• New 11 kv feeder separation by 95 sqmm HT AB Cable and New 100 KVADTR installation & DTRAugmentations
• Reporting the projects in monthly status meeting to management highlighting issues which could impact on quality, cost and schedule
• Managing EPC projects activity involving working out various requirements with respect to utilities of machine, Manpower & monitoring overall projects operation for ensuring timely completion
• Liaising with client/Project Management consultant/Vendor for BOQ and project relevant documents
• New single and three phase energy meter installation and Replacement of defective meter to improve billing efficiency
• Conversion of old bare conductor by new 50, 70, 95 sqmm LT ab cable
• Installation of 25, 63, 100 and 200 kVA transformer.

• New 11 kv feeder separation by 95 sqmm HT AB Cable
• Conversion of old bare conductor by 50sqmm and 70sqmm LT ABCable
• New 63, 100 KVA DTR installation and DTRAugmentations
• Proper co-ordination with client
• Supervision of Entire Work as per approved GTP & REC Standard
• Providing guidance to junior staff in the areas of leadership, continuous improvement, decision-making and conflicts solution
• Carrying out inspections on all Site Activity with client and Electrical Inspector
• Maintaining the all Work Quality as per the Approved Drawing
• Ability to work in an RE & urban Field Area that includes the ROW issue and Local Issues.