Santosh Shrikant Khot
Piping Designer
Mumbai
Summary
Over 20 years of enriching experience in detail engineering of various projects (within India & Overseas) in Oil & Gas, Polymer, Chemical and Petrochemical Sector as a Piping Designer. Proficient in Preparation of Equipment Layouts, Piping GAD’s, Column Piping, Nozzle Orientation, Support Sketches (CPS/SPS), Isometrics, MTO, As-Built drawings & Site co-ordination & Measurement. PDS-Equipment, piping and support modeling, Drawing Manager, Isometric Extraction. Worked as Piping Designer and Checker on South Yoloten Gas Field Development Project, Turkmen Gas for Petrofac, UAE. Overseas working experience at UAE-Sharjah.
Overview
1
1
Language
23
23
years of professional experience
Work History
Piping Designer
M/s BLACK & VEATCH Engineering India
07.2022 - Current
- Role: E3D Piping Designer.
- Project: GOLAR MARK-II FLNG (FLOTING LIQUIED NATURE GAS)
- Project no NL8793
- Project: CEDAR
- Project no NL418125
- Technical Responsibility:
- Working on Liquification area (Module3 & 4) Modeling of equipment with latest equipment drawings and given the comment for changes the nozzle orientation and platform orientation
- Model Cryogenic line as per P&id Cryogenic piping support for critical, non-critical line as per support span chart Raised SPI item request and track
- Co-ordination with other department (for Civil Information, P&ID Markups, Instrument Hookups, Mechanical Drawings).
- 30%, 60% and Model review with Client and resolving the given tags.
- 3D Software-E3D
Piping Designer
M/s Worley Engineering India
12.2012 - 06.2022
- Role: E3D Piping Designer.
- Project: REDIGREEN (PERNIS SITE)
- Project no NL8793
- Technical Responsibility:
- Working on HOV area (Hydrotreatment of Vegetable Oil) Modeling of equipment with latest equipment drawings and given the comment for changes the nozzle orientation and platform orientation
- Working on HVO area handing module and SB (Stick build area)
- Modelled big bore line as per P&id piping support for critical, non-critical line per support spang chart Raised SPI item Request and track
- Co-ordination with various department
- 30%, 60% and Model review with Client and resolving the given tags.
- Clash checking and resolve
- Project: INEOS STYROLUTION (Enhanced Specialties Production in North America)-ESPN
- Technical Responsibility:
- Tank from area and Common area
- Modeling of equipment with latest equipment drawings and giving comments for changes the nozzle orientation and platform orientation.
- Line routing as per the P&ID.
- Selection of supports according to the stress load and modelled the same with the standards.
- 30%, 60% and 90% Model review with Client and resolving the given tags.
- Clash checking and resolve
- Preparation of Loading Data for Civil pipe supports and Special Pipe Support.
- Co-ordination with other department (for Civil Information, P&ID Markups, Instrument Hookups, Mechanical Drawings).
- BASF- LYSMARAL, BASF-SAB, BASF-BDO
- BASF LUDWIGSHFEN
- As a piping designer PDMS working on
- The project scope includes piping and equipment modeling with respect to LFM. Piping and equipment modeling as per LFM. Marking PID. support modeling Also piping error resolve and isometrics attraction
- Lower fares heavy oil development program phase-1 (KOC)
- As a piping designer PDMS working on
- Development of wellhead Patten 13-2 and 13-L and also developing steam distribution network piping and plot plan Equipment layout piping detailing engineering drawings topography survey. and
- Development of well block 2 and 3 piping modelling support modelling as per support standard & stress requirements unit plot plan development manifold study generation of piping isometric
- Flare gas recovery (FGR): Updating the vendor documents Model Review with the NAVIS and resolving the tags according to the client requirement. PDS 3D Modelling of Piping and Equipment according to the design standards and requirements of the project. Extraction & checking of isometrics. Fixed the various metering devices and instruments through PDS modelling. Isometric extraction and revision and updated the RDB. Physical support modelling from PDS
- 3D Laser Scanning Shell Pernis: Worked as a Piping Designer for Project using PDMS and LFM Nox Reduction Isometric Checking, Checking of Pipe Supports as per stress comments, taking care of model review comments, Clash checking & resolving the same
- Dupont Alta Mira line II Expansion: Huge Project on TITANIUM DIOXIDE finish product. Working on PDMS Tool with piping design on DUPONT ALTAMIRA. Work for FINISHING AND SIZING Area with Piping Design. Also work specially on SUPPORT DESIGN. Nice command on supporting. Project completed with quality output.
- Girbotols & BB Treaters Safety: Worked as a Piping Designer for Project using PDS Extraction isometric Checking of Pipe Supports as per stress comments, taking care of model review comments, Clash checking & resolving the same
Piping Designer
M/s Petrofac Sharjah, UAE (Self Employer)
03.2011 - 01.2012
- Role: PDS Piping Designer
- Project: South Yoloten Gas Field Development Project, Turkmen Gas. (Code:- J1199 & Unit:-45, 35, 25, 15 MPU)
- Technical Responsibility:
- Worked as a Piping Designer Piping & Equipment modelling as per P&ID and plot plan layout Modification of routing as per comments, Nozzle orientation as per equipment drawing
- Interference/clash detection, Correction & rectification of models on the basis of analysis reports, Detailed drawings and Section of pipe rack and Support mark
- Isometric extraction, drawing checking with P&ID’s, Isometric MTO Checking
Piping Designer
M/s Aryatech Engineering india
01.2012 - 12.2012
- Role: PDS Piping Designer
- Project: IOCL REFINARY (DCU AREA)
- Technical Responsibility:
- Line route as per the P&ID.
- Modelling of Piping and Equipment according to the design standards and requirements of the project.
- Preparation of Design Inputs for Civil/ Structural Design.
- Preparation of nozzle orientation of Equipment, Piping plans, piping studies.
- Selection of supports according to the stress load and modelled the same with the standards.
- Model Review with the SPR and resolving the tags according to the client requirements.
- Interference and clash checking and updating the reports generated and RDB conflict report.
Piping Designer
M/s VITEC Engineering Consultants, (P) Ltd, Mumbai.
02.2010 - 01.2011
- Role: Piping Designer
- Project: K3-K4 & SPD Expansion Project, Taloja, Mumbai.
- Technical Responsibility:
- Line Routing as per P&id & its Supporting.
- Coordination with Stress Engineer for routing of Stress Critical Lines with help of Caesar-II (5.20).
- Preparation of Loading Data for Civil pipe supports and Special Pipe Support.
- 30%, 60% and 90% Model review with Client and resolving the given tags.
- IFC Isometrics.
Piping Designer
M/s SNC Lavlin India (P) Ltd, Mumbai.
02.2009 - 02.2010
- Role: PDS Piping Designer.
- Project: Guru Govind Singh Refinery Project (Punjab), (Unit-Delayed Coker Unit)
- Technical Responsibility:
- Equipment Modelling Using PDS software.
- Line Routing as per P&id & its Supporting.
- Review Model & Resolve Clashes.
- Preparation of Utility station, safety shower.
- Piping and Support Modeling on PDS as per standards.
- Work on RDB Conflict Report & Check Nozzle Associatively.
- IFC Isometrics.
Piping Designer
M/s Bacrel Engineering (P) Ltd, Mumbai.
06.2007 - 02.2009
- Role: PDS Piping Designer.
- Project: Jamnagar Oil & Gas Refineries project (Unit:- Crude-3, Clean Fuel)
- Technical Responsibility:
- Line route as per the P&ID.
- Modelling of equipment with latest equipment drawings and giving comments for changes the nozzle orientation and platform orientation.
- Preparation of Design Inputs for Civil/ Structural Analysis.
- Selection of supports according to the stress load and modelled the same with the standards.
- 30%, 60% and 90% Model review with Client and resolving the given tags.
- Interference and clash checking and updating the reports generated by RDB conflict report.
- Preparation of Loading Data for Civil pipe supports and Special Pipe Support.
Piping Designer
M/s IBI Chemature Engineering (P) Ltd, Mumbai.
08.2006 - 06.2007
- Role: PDS Piping Designer.
- Project: Petro Rabign Project
- Project: PCP-1 And PCP-2 Project
- Technical Responsibility:
- Review of Piping modelling & routing as per P&ID.
- Checking PDS output such as isometric.
- Support checking as per standards.
- Review model & resolve clashes.
- Work on RDB Conflict Report & Check Nozzle Associatively.
- Preparation of MTO
Piping Designer
M/s Quantam Engineering Consultant
08.2004 - 08.2006
- Role: Piping Designer.
- Project: Bombay Dying (CF-846)
- Technical Responsibility:
- Preparation of Equipment location layout.
- Nozzle orientation.
- Equipment support checking as per standards.
- Preparation of piping layout as per P&ID.
- Preparation of sectional drawings, isometrics and MTO.
- Manual Single line Isometric Sketching.
Piping Designer
M/s S.P Services Consultant
03.2003 - 08.2004
- Role: Piping Designer.
- Client: GHARDA Chemicals
- Client: Kvaerner Power Gas Pvt. Ltd
- Technical Responsibility:
- Preparation of Isometric Drawings manually
- Preparation of piping layout as per P&ID.
- Preparation of Bill of Material.
Education
Mechanical Draughtsman - undefined
Gupte Academy
Mechanical Diploma - undefined
Intermediate - undefined
Skills
Operating System: Windows 98/ 2003/ XP
Engineering Software’s: PDS, PDMS, E3D SPR, Navis Viewer (Taken SP3D Training)
Package: MS-OFFICE
Declaration
I hereby declare that all the above-mentioned information is true to the best of my knowledge and belief. (Santosh Shrikant Khot)
Personal Minutiae
- Address: 72/1965, 3rd Floor, Sai-Chaitanya CHS, Kannamwar Nagar-2, Vikhroli-East, Mumbai-400083.
- Nationality: Indian.
- Marital Status: Single.
- Passport No: Z4200356 (Valid till April-2027).
- Total Experience: 20 Years
- Notice Period: 15 Days
Timeline
Piping Designer
M/s BLACK & VEATCH Engineering India
07.2022 - Current
Piping Designer
M/s Worley Engineering India
12.2012 - 06.2022
Piping Designer
M/s Aryatech Engineering india
01.2012 - 12.2012
Piping Designer
M/s Petrofac Sharjah, UAE (Self Employer)
03.2011 - 01.2012
Piping Designer
M/s VITEC Engineering Consultants, (P) Ltd, Mumbai.
02.2010 - 01.2011
Piping Designer
M/s SNC Lavlin India (P) Ltd, Mumbai.
02.2009 - 02.2010
Piping Designer
M/s Bacrel Engineering (P) Ltd, Mumbai.
06.2007 - 02.2009
Piping Designer
M/s IBI Chemature Engineering (P) Ltd, Mumbai.
08.2006 - 06.2007
Piping Designer
M/s Quantam Engineering Consultant
08.2004 - 08.2006
Piping Designer
M/s S.P Services Consultant
03.2003 - 08.2004
Intermediate - undefined
Mechanical Diploma - undefined
Mechanical Draughtsman - undefined
Gupte Academy