Good knowledge and Experience in maintenance of Boil-off gas and minimum send out compressors of dresser Rand make.
Good Experience in installation and removal of in tank two stage LNG pump of EBARA make.
Good Experience in installation and removal of High-pressure LNG pump of 16 stages, manufactured by Nikkiso.
Having good knowledge in maintenance of marine loading arms of TECHNIP FMC i.e., replacement of cryo seals, Handling of ESD scenarios, QCDC, swivel joint maintenance etc.
Conducted Walk down on daily basis during erection/installation of equipment and issue of punch points to EPCC on priority base to avoid delay of mechanical completion of terminal.
Good experience in commissioning of in tank pumps, High pressure LNG pumps, Boil-off gas compressors, minimum send out compressors and all LNG related equipment like air heater fans, air compressors of Ingersol Rand make and glycol water pumps of ITT make.
Having good knowledge about cryo supports and non-cryo supports related to LNG.
Troubleshooting And Overhauling of Various Rotating Equipment Like Single and Multi-Stage Centrifugal Pumps, Make: Pompe Peroni, Sundyne, Sulzer, Pompe Gabionetta, Worthington, Ebara Pumps, ITT Gould’s Etc.
Having Good Knowledge on All Types of Alignment Procedures, Having on hands experience on Laser Alignment Tools. (Go-Laser, Laser Fixture and SKF Laser Alignment Kit).
Installation And Troubleshooting of Mechanical Seals.
Frictional Bearing Maintenance of High-Speed Equipment
Having Good Idea on Installation of Anti Frictional Bearings.
Participated In Maintenance of Multistage Compressors (Make: Mitsubishi, Hitachi, Bhel, Siemens)
Overhauled 9.5 Mw And 1.2 Mw Steam Turbine Including Centering, Clearance Checking in Labyrinths, Carbon Rings, Bearing Clearance Etc.
Overhauled various gear boxes (simple, compound, planetary gear units).
Serviced different types of valves like gate, globe, ball, plug, butterfly and NRV’s. That included checking of valve seats and changing of gland packing.
Participated in major turnaround of Ammonia and urea plants.
Worked on Erection and maintenance of Heat exchangers, Chillers and Reboilers.
Maintenance of Belt Conveyors - gear box and their alignment, pulleys and bearings.
Dhamra LNG Limited Commissioned Its first LNG Receiving, Storage and Regasification Terminal in Dhamra (East Coast region) With 5 MMTPA Capacity. The Terminal Area Is Situated in The Special Economic Zone (Sez) Of Adani port Near the Entrance to Adani Port.
Mechanical technician
M/S PETRONET LNG LTD
Kochi
08.2020 - 01.2022
Petronet LNG Limited commissioned its second LNG receiving, storage and regasification terminal in Kochi with 5 MMTPA capacity. The terminal area is situated in the Special Economic Zone (SEZ) of Puthuvypeen near the entrance to Cochin Port.
junior engineer- mechanical maintenance
M/S nagarjuna fertilizers and chemicals limited
Kakinada
06.2009 - 08.2020
Nagarjuna Fertilizers and Chemicals Limited, Kakinada, is the first natural gas-based fertilizer plant in South India having two streams of ammonia (900 MTPD each) and two streams of urea (1500 MTPD each) designed by M/s Snamprogetti and M/s HaldorTopsoe.
M/S Albayroni fertilizers (SABIC)
01.2016 - 12.2016
Bearing inspection of steam turbine and bearings inspection, replacement of seals of booster compressor, Make: DRESSER RAND AND MHI
M/S SAUDI KAYAN (SABIC)
01.2016 - 12.2016
Overhauling of twin-screw Refrigeration compressor of HOWDEN Make
M/S TASNEE HDPE
01.2014 - 12.2014
Overhauling of Extruder, Make: KOBELCO
M/S Borouge
Abu Dhabi
Bearing inspection of propane compressor and turbine
GPIC
Bearing inspection, replacement of bearings and renewal of clutches of ID and FD fans
m/s SAMAC
Screw cleanings of EXTRUDER and overhauling of connected gearbox of JSW make
Industrial Maintenance Officer (Mechanical) at CIA do Metropolitano de São Paulo - METRÔIndustrial Maintenance Officer (Mechanical) at CIA do Metropolitano de São Paulo - METRÔ
<ul>
<li>Executed maintenance and repair schedules through effective leadership of mechanical team.</li>
<li>Developed strategies that enhanced equipment reliability and performance.</li>
<li>Implemented safety protocols to ensure compliance and workplace safety.</li>
<li>Trained staff on mechanical systems and best practices for operations.</li>
<li>Managed inventory of mechanical parts and ensured availability for projects.</li>
<li>Used strong attention to detail and knowledge of resources to manage technical issues.</li>
</ul> at JAKSON LIMITED<ul>
<li>Executed maintenance and repair schedules through effective leadership of mechanical team.</li>
<li>Developed strategies that enhanced equipment reliability and performance.</li>
<li>Implemented safety protocols to ensure compliance and workplace safety.</li>
<li>Trained staff on mechanical systems and best practices for operations.</li>
<li>Managed inventory of mechanical parts and ensured availability for projects.</li>
<li>Used strong attention to detail and knowledge of resources to manage technical issues.</li>
</ul> at JAKSON LIMITED
<ul>
<li>Performed preventive maintenance on industrial machinery and equipment.</li>
<li>Identified mechanical issues through visual inspection and testing of components.</li>
<li>Repaired or replaced malfunctioning parts, including motors, pumps, valves, seals, bearings.</li>
<li>Assign maintenance tasks and ensure compliance with quality standards</li>
<li>Operated hand tools to repair or replace defective parts.</li>
<li>Inspected moving parts for wear or damage on a regular basis to prevent breakdowns.</li>
<li>Dismantled defective machines and reassembled them after repairs were made.</li>
<li>Maintained records of all work performed in the form of written reports or computer logs.</li>
<li>Troubleshooted electrical control systems using schematics and other diagnostic tools.</li>
<li>Maintained a safe working environment by adhering to safety regulations and standards.</li>
<li>Reviewed schedules with the maintenance team before 5S audits</li>
<li>Conduct routine inspections of hoists and cranes for operational safety</li>
<li>Implemented solutions to prevent future problems</li>
<li>Key Equipment: Hytrol Conveyors, Automated See Grid Systems, Auto Store, Dematic Conveyors, Gorbel Hoists, and Coffin Hoists</li>
</ul> at AMENTUM<ul>
<li>Performed preventive maintenance on industrial machinery and equipment.</li>
<li>Identified mechanical issues through visual inspection and testing of components.</li>
<li>Repaired or replaced malfunctioning parts, including motors, pumps, valves, seals, bearings.</li>
<li>Assign maintenance tasks and ensure compliance with quality standards</li>
<li>Operated hand tools to repair or replace defective parts.</li>
<li>Inspected moving parts for wear or damage on a regular basis to prevent breakdowns.</li>
<li>Dismantled defective machines and reassembled them after repairs were made.</li>
<li>Maintained records of all work performed in the form of written reports or computer logs.</li>
<li>Troubleshooted electrical control systems using schematics and other diagnostic tools.</li>
<li>Maintained a safe working environment by adhering to safety regulations and standards.</li>
<li>Reviewed schedules with the maintenance team before 5S audits</li>
<li>Conduct routine inspections of hoists and cranes for operational safety</li>
<li>Implemented solutions to prevent future problems</li>
<li>Key Equipment: Hytrol Conveyors, Automated See Grid Systems, Auto Store, Dematic Conveyors, Gorbel Hoists, and Coffin Hoists</li>
</ul> at AMENTUM